SECULINK D4-N50 4K POE Camera Outdoor Security Instruction Manual
- June 2, 2024
- SECULINK
Table of Contents
SECULINK D4-N50 4K POE Camera Outdoor Security
Product Information
- SECULINK POE Camera Operation Instruction
- Please read the instructions carefully before using, and keep it properly.
- Fit Models
- D4-N50,
- D6-N80,
- F6-N20,
- F6-N50,
- F6-N80,
- F7-N50,
- F8-N20,
- F8-N50, ……
- Need Help?
- Visit us online for up-to-date software and complete instruction manuals.
| SECULINK TECHNOLOGY (HK) LIMITED | SHENZHEN SECULINK TECHNOLOGY CO., LTD |
|---|---|
| Website: | www.seculink.net |
| E-mail: | info@seculink.net |
Information in this document is subject to change without prior notice. As our products are subject to continuous improvement, SECULINK (SECUEYE) and our subsidiaries reserve the right to modify product design and specifications, without notice and without incurring any obligation.
- CONNECTION AND SETUP
- POE (Power Over Ethernet) enables you to use just a single cable for both power and data transmission, allowing you to position your cameras anywhere without the need for a nearby power outlet. Plug and Play.
- Specification of Ethernet Cables
- SECULINK POE cameras support T-568B connectors and CAT5, CAT6, and CAT7 with 8 PIN Ethernet cables.
- The maximum cable length that the POE camera supports is 100 meters (328 feet).
- Connecting to POE NVR
- SECULINK POE Camera (Non-APP) is an add-on POE camera, which cannot work independently.
- It works perfectly when connected to ONVIF POE NVR.
- Connect your POE camera to the POE NVR by a single network cable, then the POE camera will get power via the POE NVR.
- If you want to power it via a POE switch, you need to make sure that the POE switch is 802.3at / 802.3af compliant (48V) and supports active mode.
- Adding to POE NVR
- Log into your SECULINK POE NVR and click on Quick Add to enter into the camera management interface.
- Then, click on Device Search to locate the IP address for your POE cameras that should be connected to the same network as your POE NVR.
- A list of all connected cameras will appear. Select the camera from the list by clicking on the checkbox, click Add to add the camera into the Added Devices menu.
- When it has been added, the camera will be ready to view on your POE NVR.
Specifications
| Feature | Description |
|---|---|
| Power Over Ethernet (POE) | Single cable for power and data transmission |
| Cable Type | T-568B, CAT5, CAT6, CAT7 with 8 PIN |
| Maximum Cable Length | 100 meters (328 feet) |
| POE Standards | 802.3at / 802.3af (48V) with active mode |
FAQs
- What models are compatible with the SECULINK POE Camera?
- D4-N50, D6-N80, F6-N20, F6-N50, F6-N80, F7-N50, F8-N20, F8-N50, and more.
- Where can I find the latest software and complete instruction manuals for my SECULINK POE Camera?
- You can visit Seculink Surveillance for the latest software and manuals.
- How do I connect my SECULINK POE Camera to a POE NVR?
- Connect the camera to the POE NVR using a single network cable. The camera will receive power through the POE NVR once connected.
- Can the SECULINK POE Camera work independently without a POE NVR?
- No, the SECULINK POE Camera (Non-APP) is an add-on camera and requires connection to an ONVIF POE NVR to operate.
- What should I check if I want to power my SECULINK POE Camera via a POE switch?
- Ensure that the POE switch is 802.3at / 802.3af compliant (48V) and supports active mode.
CONNECTION AND SETUP
POE (Power Over Ethernet) enables you to use just a single cable for both power and data transmission, allowing you to position your cameras anywhere without the need for a nearby power outlet. Plug and Play.
Specification of Ethernet Cables
- SECULINK POE cameras support T-568B connectors and CAT5, CAT6, and CAT7 with 8PINEthernet cable.
- The maximum cable length that the POE camera supports is 100 meters(328 feet).
Connecting to POE NVR
- SECULINK POE Camera (Non-APP) is an add-on POE camera, which cannot work independently.
- It works perfectly when connected to ONVIF POE NVR.
- Connect your POE camera to the POE NVR by a single network cable, then the POE camera will get power via the POE NVR.
Connection Diagram
POE NVR Connection Diagram
If you want to power it via a POE switch, you need to make sure that the POE switch is 802.3at / 802.3af compliant (48V) and supports active mode.
Adding to POE NVR
- Log into your SECULINK POE NVR and click on Quick Add to enter into the camera management interface.
- Then, click on Device Search to locate the IP address for your POE cameras that should be connected to the same network as your POE NVR.
- A list of all connected cameras will appear. Select the camera from the list by clicking the checkbox, and click Add to add the camera to the Added Devices menu.
- When it has been added, the camera will be ready to view on your POE NVR.
Fit Models:
- D4-N50,
- D6-N80,
- F6-N20,
- F6-N50,
- F6-N80,
- F7-N50,
- F8-N20,
- F8-N50,
CONTACT
- Need Help? Visit us online for up-to-date software and complete instruction manuals. SECULINK TECHNOLOGY (HK) LIMITED
- SHENZHEN SECULINK TECHNOLOGY CO., LTD
- Website: www.seculink.net.
- E-mail: info@seculink.net.
Information in this document is subject to change without prior notice. As our products are subject to continuous improvement, SECULINK (SECUEYE) and our subsidiaries reserve the right to modify product design and specifications, without notice and without incurring any obligation. Please read the instructions carefully before using, and keep it properly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>