SCAN 67 Wood Stoves User Manual
- June 2, 2024
- SCAN
Table of Contents
SCAN 67 Wood Stoves
REPLACEMENT OF GLASS
- Remove the cover plate in the base
- Remove the screws and the top cover plate at the 2 door
- Cut the glue-free of glass and door with a Stanley knife and gently pull out the top of the glass
- Lift the glass out
- Unscrew the screws at the bottom of the door and 5 pull out the bottom rail
- Replace the glass gasket if needed
- Place the silicone gasket and the bottom rail on the new glass
Apply glue in two places at the top of the door and then place the glass. Important! In order not to break the glass, the distance from the glass to the handle should be approx. 1 mm
Mount the screws and cut the ends of the silicone gasket
Place the silicone gasket
Place the top cover plate on the door. Press the glass against the door while mounting the screws
Place the cover plate in the base
- SCAN A/S
- Damsbovej 1
- DK-5492 Vissenbjerg
- www.scan-stoves.com
Edition:
90067520 10063179-P00 15.09.2022
Product Specifications
- Brand: SCAN
- Model Number: 51063055 (UK), 51063056 (DE, FR)
- Manufacturer : SCAN A/S
- Country of Origin : Denmark
Frequently Asked Questions (FAQ)
Q: How often should I replace the glass in the product?
A: The glass replacement frequency may vary depending on usage. It is
recommended to inspect the glass regularly for any damage and replace it if
necessary.
Q: Can I use any type of glass for replacement?
A: It is important to use the recommended type of glass specified by the
manufacturer to ensure proper fit and safety.
Q: Are there any special tools required to replace the glass?
A: Basic tools like a screwdriver may be needed to replace the glass. Refer
to the user manual for specific instructions.