IPSi Scan 1950 Corded Area Imaging Scanner User Guide
- September 13, 2024
- IPSi Scan
Table of Contents
Click here for more information!
INTEGRATED PRODUCTIVITY SYSTEMS
844-477-4911 |
www.ipsiscan.com Xenon™ XP 1950g
Corded Area-Imaging Scanner
Quick Start Guide
Agency Model: 1950
Note: Refer to your User Guide for information about cleaning your
device.
Get Started
Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Note: The power supply must be ordered separately, if needed.
Connect the Scanner
USB:
Keyboard Wedge:
RS232 Serial Port:
Reading Techniques
The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read.
Standard Product Defaults
The following bar code resets all standard product default settings.
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS terminal using
port 9B, scan the appropriate code below to program the terminal, then power
cycle the cash register.
Note: For additional RS485 interface selections, see the User Guide for your product.
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-based COM Port. If you are using a Microsoft® Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The driver will use the next available COM Port number. Apple® Macintosh computers recognize the scanner as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
USB PC Keyboard
Scan the following code to program the scanner for a USB PC Keyboard.
Keyboard Country
Scan the appropriate country code below to program the keyboard layout for
your country or language. By default, national character replacements are used
for the following characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character
Replacements chart in your User Guide to view the character replacements for
each country.
Note: For a complete list of country codes, see the User Guide for your product.
Trigger
The following bar codes will allow you to use the scanner in Manual Trigger – Normal Mode (need to press the trigger to read) or Presentation mode (the scanner is activated when it “sees” a bar code).
Streaming Presentation™
When in Streaming Presentation mode, the scanner leaves the scan
illumination on all the time and continuously searches for bar codes.
Suffix
If you want a carriage return after the bar code, scan the Add CR Suffix bar
code. To add a tab after the bar code, scan the Add Tab Suffix bar code.
Otherwise, scan the Remove Suffix bar code to remove the suffixes.
Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Add Code ID Prefix To All Symbologies
(Temporary)
Note: For a complete list of Code IDs, see the User Guide for your product.
Function Code Transmit
When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted.
EZConfig-Scanning
To access additional features for the scanner, use EZConfigScanning, an online
configuration software tool, available from our website.
Support
To search our knowledge base for a solution or to log into the Technical
Support portal and report a problem, go to
www.hsmcontactsupport.com.
Product Documentation
Product documentation is available at
www.honeywellaidc.com.
Limited Warranty
For warranty information, go to
www.honeywellaidc.com and click Get Resources
Product Warranty.
Patents
For patent information, see www.hsmpats.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this material. HII disclaims all
responsibility for the selection and use of software and/or hardware to
achieve intended results.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
Copyright© 2019 Honeywell International Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>