TRIM-TEX Large Bullnose Corner Bead Installation Guide

TRIM-TEX Large Bullnose Corner Bead

Product Information

• Specifications:
  • Setback: Large

Product Usage Instructions

• Before Installation:
  • Coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
  • Press the bead in place, applying pressure to the mud legs.
  • Finish with drywall compound.

FAQs

• Q: How do I know if the bead is installed correctly?
  • A: Ensure that the bead is pressed firmly in place and that there are no gaps between the bead and drywall. Apply even pressure along the mud legs for a secure installation.

³/4 ” Large Bullnose Corner Bead

• With its soft, rounded profile, it’s no wonder that the ¾” Large Bullnose Corner Bead remains one of Trim-Tex’s most popular corner trim designs!
• Whether you’re looking to soften your corners for a safer recreational environment or add a traditional/southwestern look to your room,
• Trim-Tex offers the most complete line of ¾”-radius Bullnose products in the industry.

Installation Guide

Before Installation

Ensure setbacks are even with the corner edge. Measure, cut and dry fit the bead, leaving a ½” gap at the floor.

• Step 1:
  • Coat both the bead and edge of drywall with Trim-Tex 847 Spray Adhesive.
• Step 2:
  • Press the bead in place, applying pressure to the mud legs.
• Step 3:
  • Staple every 6”-8” using ½” staples.
• Step 4:
  • Finish with drywall compound.

CONTACT

• 3700 W Pratt Avenue,
• Lincolnwood, IL 60712
• 800-874-2333
• trim-tex.com.

References

• Plastic & Vinyl Drywall Corner Beads & Finishing | Trim-Tex

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>