TRIM-TEX 09TT3010 Pullaway L Bead Installation Guide
- June 9, 2024
- TRIM-TEX
Table of Contents
TRIM-TEX 09TT3010 Pullaway L Bead
Pullaway® L Bead
Got a messy job that needs maximum masking protection?
This bead’s for you! This bead creates a smooth finished edge when drywall
meets another substrate. Its removable strip pulls out easily after finishing,
and provides up to 1⁄2″ of masking protection.
Installation Guide
Before Installation: Measure, cut and dry fit the bead.
Step 1:
Coat the bead with Trim-Tex 847 Spray Adhesive.
Step 2:
Press the bead in place, applying pressure to the mud legs.
Step 3:
Staple every 6”-8” using ½” staples.
Step 4:
Finish with drywall compound
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>