REDRAGON M910-KS Ranger Lite Gaming Mouse Instruction Manual
- June 6, 2024
- REDRAGON
Table of Contents
REDRAGON Ranger Lite
Gaming Mouse
Operating Instructions
Dear user
Thank you for choosing our ‘ to the product. To protect your rights and for
better customer service, we ask that you note our warranty rules.
- Within the guarantee period, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard Impacts, submersion Into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as footpads) and spare parts replacement are not Included In our warranty.
OS support
Windows XPNista/Win7/Win8/Win10
Button Description
- Left mouse button.
- Right mouse button.
- Scroll wheel and middle button.
- Backward button.
- Forward button.
- DPI+ button.
- DPI- button.
- Light mode toggle key: The mouse switches between the 9 lighting modes for each click.
- Rapid-fire button (one click equals three left mouse button clicks).
- Report rate switch: 125Hz/250Hz/500Hz/1000Hz four-level switching.
- Power Switch: ON (Power On with LED ON) / OFF(Power OFF) / ECO(Power On without LED).
Basic Operation:
1 How to Connect the Mouse with a Computer
1.1 Wired Connection
- Take out the USB A to USB C cable in the package and connect the mouse with your computer.
- The computer will recognize and configure the mouse automatically.
- The mouse will be ready for use when the configuration is finished. The scroll wheel LED lights are on red to show that the mouse is being recharged now.
- Turn the bottom switch to ON to light up the mouse decoration light, otherwise turn it off.
1.2 Wireless Connection
- Take out the nano USB receiver in the package and plug it into any available USB port on your computer.
- Slide the power switch on the bottom of the mouse to ON or ECO.
- The computer will recognize and configure the keyboard automatically.
- The mouse will be ready for use when the configuration is finished. The scroll wheel LED and the decoration LED will light on when the bottom switch was slid to ON. If you slide the bottom switch to ECO, only the DPI indicator can be active.
- The scroll wheel light will flash when the battery is low. Recharge the mouse when the battery is low.
2 How to Select
DPI The top two buttons near to the scroll wheel are set to DPI+ / DPI – as
default. Press the two buttons to change dpi and the scroll wheel light will
change color accordingly.
3 How to Switch the Report Rate of the mouse
Press the report rate button on the bottom of the mouse to change the report
rate. The report rate changes from 125Hz to 250Hz, 500Hz, and 1000Hz.The
scroll wheel light changes color for each accordingly.
4 How to Select the Backlight of the mouse
Press the light button repeatedly to change the backlight. The effect changes
in the following sequence: Mixing color flowing, purple light, Seven color
cycling while breathing, Mixing color tracing, Neon light, Mixing color light
on, Flashing in purple and green, Starry night twinkling, Seven colors waving,
Off.
5 How to Recharge the Battery
When the battery is low, please recharge the battery in time. Take out the USB
A to USB C cable and connect the mouse with a computer. While the battery is
under recharging, the scroll wheel lights up in red and then turns to green
when the battery is fully recharged. It may take about three hours for the
mouse to be fully recharged.
The battery can be recharged for more than 300 cycles times. And you can use
the mouse while it is under recharging.
Note: Slide the power switch on the bottom of the mouse to OFF for long-
term storage.
Warning: Charging current: SV= 2A max
6 How to Reconnect the Mouse with the USB Receiver
The mouse may be lost connection with the USB receiver for some occasional
reasons such as strong magnet, violent vibration. So you may need to reconnect
the mouse with the USB receiver. In this case, unplug the receiver and plug it
back in again. Slide the power switch on the bottom of the mouse to ON, press,
and hold the Left, Middle, and Right buttons at the same time till the scroll
wheel lights up and flashes in Yellow. The reconnection will be completed and
you can use the mouse then.
Features:
1 Auto Sleep and Smart Shut down
The mouse will go to light sleep if there is no operation in one minute or go
to deep sleep in five minutes. You can wake it up by clicking any of the left,
right, or middle mouse buttons.
2 Five DPI levels with color Indication
Press the DPI+ or DPI- button to switch mouse DPI value from 500(Red) to
1000(Blue), 2000(Green), 3000(Purple) or 4000(Yellow).
3 Low Battery Indication
The scroll wheel light will flash in RED when the battery is low.
4 Storage for the Nano USB Receiver
The storage case in the bottom of the mouse is convenient for you to take in
the nano USB receiver.
Software Instructions
Please download the software on www.redragonzone.com for this mouse. You can get more functions and settings after software installation.
- The DPI value can be set from 250 to 8000.
- Continuous keystroke function: Set the number of clicks and delay time.
- Backlight effects switching
- 9 of the mouse buttons can be remapped to various actions.
- Polling rate: 125Hz/250Hz/500Hz/1000Hz.
- Battery percentage Indication: Battery percentage information is shown on the main interface of the software.
FAQ
- If the mouse is not responding, please check whether the mouse is turned on or plugged properly in the corresponding computer USB port, or try another USB port.
- If the cursor is moving slowly, jumping, or intermittent, please try another surface. Surfaces that are dark, dirty, not flat, or bright may affect the performance of the mouse. Use of a mouse pad is recommended.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radiocommunications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>