BRAYER BR1117 Espresso Machine Instruction Manual

: June 2, 2024
: BRAYER

Table of Contents

BRAYER BR1117 Espresso Machine
Product Information
Product Usage Instructions
FAQs
SAFETY MEASURES AND COFFEE MAKER
BEFORE USING THE COFFEE MAKER
ESPRESSO PORTION SETTING
HOT WATER AND ITS USAGE
CLEANING THE COFFEE MAKER
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRAYER BR1117 Espresso Machine

Product Information

Specifications:

Drip tray with grid and filling pop-up indicator
Filter holder handle and coffee filter
Control panel with cup warming tray
Intended for household use only

Product Usage Instructions

Safety Measures and Recommendations:

Read the operation instructions carefully before using the espresso machine. Do not allow children to play with packaging materials. This machine is for household use only, not for commercial purposes.

Before Using the Espresso Machine:

After transportation or storage at low temperatures, allow the machine to acclimate for at least three hours at room temperature. Make sure to remove the transportation plug from the water outlet after removing the water tank.

Auto Switch Off Function:

Do not remove the filter holder during operation or immediately after brewing. Check the grind size and tamping pressure for optimal espresso extraction. Use the large filter for making two cups of coffee.

Making Espresso:

Do not leave the machine unattended while brewing. Preheat cups on the warming tray before brewing. Set the espresso portion according to desired cup size.

Making Cappuccino:

Set the coffee amount for two cups accordingly. Be cautious of hot steam during frothing. Use fresh milk without additives, with specific fat percentages. Clean the cappuccinator pipe tip after each use.

Return to Factory Settings:

To reset settings, follow the specified instructions in the manual.

FAQs

Q: Can I use this espresso machine commercially?
- A: No, this espresso machine is intended for household use only and should not be used for commercial or laboratory purposes.
Q: How do I clean the machine?
- A: Refer to the cleaning instructions in the manual for detailed steps on cleaning and maintenance.

“`

Instruction manual
Espresso machine BR1117 BR1117

brayer.ru

EN……………………………………………………………………………………………………………………..3 DE……………………………………………………………………………………………………………………17 RU …………………………………………………………………………………………………………………..34 KZ ……………………………………………………………………………………………………………………50

ENEN 3

ESPRESSO MACHINE BR1117
The coffee maker is intended for making «espresso» and «cappuccino» coffee.
DESCRIPTION
1. Drip tray 2. Drip tray grid 3. Tray filling pop-up indicator 4. Filter holder handle 5. Filter holder 6. Coffee filter 7. Control panel 8. Cup warming tray
9. Steam supply control knob « » 10. Cappuccinator pipe 11. Cappuccinator pipe tip 12. Espresso machine body 13. Water tank lid 14. Removable water tank Control panel
15. Espresso machine on/off button « » 16. One cup button « »
17. Two cups button « » 18. Steam supply on button « » 19. Measuring spoon 20. 20. Ground coffee tamper

ATTENTION!
For additional protection it is reasonable to install a residual current device (RCD) with nominal operation current not exceeding 30 mA, to install RCD, contact a specialist.

13
9 8
14 7

6

10

11

3

5

4

2

19

12

20

1

15 16 17 18

4 EN

Pic. 1

Pic. 2

Pic. 3

Pic. 4

Pic. 5

SAFETY MEASURES AND COFFEE MAKER

OPERATION RECOMMENDATIONS
Read the operation instructions carefully before using the coffee maker and keep it for future reference.
· Use the coffee maker for its intended purpose only, as specified in this manual.
· Mishandling the coffee maker can lead to its breakage and cause harm to the user or damage to his/her property and it is not covered by warranty.
· The coffee maker is intended for making espresso and cappuccino coffee and warming up ready drinks. Do not warm any other liquids.
· Make sure that the operating voltage of the coffee maker indicated on the label corresponds to your home mains voltage.
· The power plug is equipped with a grounding contact, plug it into the socket with reliable grounding contact. In case of short circuit the grounding reduces the risk of electric shock.
· Contact an electrical technician, if you are not sure that your sockets are installed properly and grounded.
· To prevent fire do not use adapters designed for connecting the power plug to the mains socket without grounding contact.
· In case of sparking in the mains socket and occurrence of smell of burning, unplug the unit and

EN 5
apply to the organization maintaining your home mains. · If smoke appears from the unit body, unplug the unit and take measures to prevent fire spreading. · Use and store the coffee maker at the temperature above 0 °C. · Do not use the coffee maker outdoors. · It is not recommended to use the unit during lightning storms. · Protect the unit from impacts, falling, vibrations and other mechanical stress. · Never leave the plugged-in coffee maker unattended. · To avoid fire, electric shock or physical injuries, do not immerse the power plug, the power cord or the coffee maker body into water or any other liquids. · Do not use the coffee maker in proximity to the kitchen sink, in bathrooms, near swimming pools or other containers filled with water. · If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water. Apply to the service center for testing or repairing the unit. · Do not use the coffee maker near heating appliances, heat sources or open flame. · Do not use the unit in places where aerosols are used or sprayed, and in proximity to inflammable liquids. · Place the coffee maker on a flat stable surface; do not place it on the edge of a table. Do not let the

6 EN
power cord hang from the edge of the table and make sure it does not touch hot surfaces or sharp edges of furniture. · Do not place the coffee maker on hot surfaces. · Do not touch the power cord and the power plug with wet hands. · Use only the coffee maker parts and accessories supplied with the unit. · Before switching the coffee maker on, make sure that all removable parts are installed properly. · Ensure that the water level in the water tank is not below the minimal mark. · Do not switch the coffee maker on if the water tank is empty. · To avoid getting burns by hot steam be careful when frothing milk or warming the ready drinks. · The filter holder surface, the cappuccinator pipe and the cappuccinator tip can get rather hot. Be cautious and careful when in contact with hot surfaces. · Do not remove the filter holder during coffee maker operation. · Let the unit cool down completely before cleaning and removing the accessories. · Unplug the coffee maker before cleaning or when you are not using it. When unplugging the coffee maker hold only the power cord plug and carefully remove it from the mains socket, do not pull the power cord — this can lead to damage of the power cord or the socket or cause short circuit.

· For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
ATTENTION! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
· The coffee maker is not intended for usage by children.
· Do not leave children unattended to prevent using the unit as a toy.
· Do not allow children to touch the unit and the power cord during the coffee maker operation.
· Place the unit out of reach of children during the operation and cooling down.
· This unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
· From time to time check the power cord and the power plug integrity.
· If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.
· Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after it was dropped, unplug the unit and apply to the service center.

· Transport the coffee maker in the original package. · Keep the unit out of reach of children and disabled · persons.
COFFEE MAKER IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE COFFEE MAKER FOR COMMERCIAL OR LABORATORY PURPOSES.

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low temperature, it is necessary to keep it for at least three hours at room temperature.
· Unpack the coffee maker and remove all the packaging materials.
· Keep the original package. · Read the safety measures and operating
recommendations. · Check the delivery set. · Examine the coffee maker for damages, in case of
damage do not plug it into the mains. · Make sure that the specifications of power supply
voltage specified on the lower panel of the unit correspond to the specifications of your mains. When the unit is used in the mains with 60 Hz frequency, it does not need any additional settings. · Wipe the coffee maker body (12) surface with a clean, slightly damp cloth to remove dust, wipe the coffee maker body (12) dry. · Make sure that the steam supply is closed. To do this
turn the knob (9) « » clockwise until bumping «0».

EN 7
CAUTION! After removing the water tank (14) remove the transportation plug from the water outlet (fig. 5).
· Before using the espresso machine for the first time, wash all removable parts (1, 2, 5, 6, 14, 19, 20) with warm water and neutral detergent, rinse and dry them.
· Remove the water tank (14), fill it with cold water up to the MAX mark and install it back to its place.
Notes: to fill the water tank (14) with water you can open the lid (13) and pour water into the tank (14).
· Insert any coffee filter (6) into the holder (5) (do not add ground coffee into the filter).
· Install the filter holder (5) into the coffee maker. The holder (5) ledges should match the grooves on the boiler « », after that turn the filter holder handle (4) to the right until bumping « » (pic. 1).
· Place a suitable cup on the grid (2). · Insert the power plug into the mains socket. · Switch the coffee maker on by pressing the on/off
button (15) « », the button (15) lighting will light up and start flashing, when the button (15) lighting stops flashing and glows constantly, this means that preheating is completed.
Notes:
– if the steam control knob (9) « » is not set to position «0», then when you turn on the coffee maker with the button (15) « », the backlight of

8 EN

the button (15) « » will appear, the indicators of
the buttons (16, 17, 18) « , , » will light up, all three button indicators (16, 17 and 18) will flash, and the boiler heating element will not turn on; – to continue the operation, set the steam supply
control handle (9) « » to the «0» position, the indicators (16, 17 and 18) will stop flashing, the boiler heating element will be switched on to heat water. · Place any suitable bowl under the tip (11) for water.
· Carefully turn the steam supply knob (9) « » counterclockwise for a quarter of a turn to release steam and fill the boiler with water, in approximately 8-10 seconds close the steam supply by turning the
steam supply knob (9) « » to the «0» position · Switch the water supply on by pressing the button (17)
« », the pump will switch on and hot water will be poured into the cup, pour the water out of the cup. · Repeat this procedure several times, the boiler will be clean after that. · To switch the espresso machine off, press the on/off button (15) « », the buttons (15) illumination will go out.
ATTENTION!
– Do not remove the filter holder (5) during espresso machine operation.
– Do not remove the filter holder (5) immediately after preparing coffee as there is redundant water and

steam pressure inside the filter (5), let the coffee maker cool down completely. · To remove the filter holder (5) turn the handle (4) to the left « » and remove the filter holder (5) (pic. 1).
AUTO SWITCH OFF FUNCTION
· If no actions were performed during 25 minutes after switching on, the coffee maker will switch off automatically.
HOW TO MAKE A GOOD ESPRESSO
· Use ground coffee for espresso coffee makers. · Slightly tamp the ground coffee in the filter (6), for
this use the ground coffee tamper (20). · Coffee strength depends on the quality and grinding
degree of coffee beans. If coffee is pouring out too long, this means the coffee powder is too fine or it is tamped too strongly.
PREHEATING
· To make a cup of hot espresso, it is recommended to preliminary heat up the coffee filter (6) and the filter holder (5).
· Open the lid (13) and fill the tank (14) with water, or remove the tank (14) and fill it with water, then install the tank (14) back to its place.
· Insert one of the coffee filters (6) into the holder (5).

Notes:
– use the small filter (6) to make one cup of coffee and press one cup button (16) « »;
– use the big filter (6) to make two cups of coffee
and press two cups button (17) « ». · Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the boiler «INSERT », after that turn the filter holder handle (4) to the right until bumping « » (pic. 1). · Place a suitable cup on the grid (2). · Insert the power plug into the mains socket. · Switch the coffee maker on by pressing the on/off button (15) « », the button (15) lighting will light up and start flashing, when the button (15) lighting stops flashing and glows constantly, this means that preheating is completed. · Switch the water supply on by pressing the button
(17) « », the pump will switch on and hot water will be poured into the cup, after switching the pump off, pour the water out of the cup. · Preheating is over.
MAKING ESPRESSO
ATTENTION! When making coffee do not leave the operating coffee maker unattended, as it is necessary to watch the cup being filled with ready coffee!

EN 9
AFTER PREHEATING:
· Make sure that the steam supply is closed. To do this
turn the knob (9) « » clockwise until bumping «0». · Remove the filter holder (5) by turning the handle (4) to
the left « » and remove the filter holder (5) (pic. 1). · Put ground coffee into a small or large filter (6) using a
measuring spoon (19), slightly tamp the ground coffee with a tamper (20). · Install the filter holder (5) into the coffee maker. The holder (5) ledges should match the grooves on the boiler « », after that turn the filter holder handle (4) to the right until bumping « » (pic. 1). · If you use a small filter (6), switch the water supply on by pressing the button (16) « » to make one cup of coffee, approximately 30 ml of espresso will be made. · To make two cups of coffee, use a large filter (6) and
press the button (17) « », approximately 60 ml of espresso will be made. Note: watch the cup filling with the ready coffee, if you need t switch the water supply off, press again the button
(16) « » or the button (17) « ».
· Switch the coffee maker off by pressing the on/off button (15) « ».
· Wait until the coffee maker cools down and remove the filter holder (5) by turning the handle (4) to the left « ». Remove the ground coffee remnants and wash the filter (6) (pic. 1).

10 EN
· For easy removing of the coffee remnants use the retainer on the handle (4) to prevent the filter (6) from falling off the holder (5).
Notes:
– the cups should be preliminary heated up, when water heats up in the boiler, put the cups on the tray (8).
– if you need to promptly remove the filter holder (5), you have to reduce the pressure in the boiler, switch the coffee maker off by pressing the on/off button (15) « », place a suitable cup under the tip (11) and slightly open the steam supply by turning
the knob (9) « » counterclockwise. After the pressure in the boiler is released, you can remove the filter holder (5).

ESPRESSO PORTION SETTING

One cup of coffee portion setting
· Espresso portion setting is best done using water and without adding ground coffee into the filter (6).
· Open the lid (13) and fill the container (14) with water, or remove the container (14) and fill it with water, place the container (14) back to its place.
· Insert one of the coffee filters (6) into the holder (5). · Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the groves on the boiler « », after that turn the filter holder handle (4) to the right until bumping « » (pic. 1). · Place a suitable cup on the grid (2).

· Insert the power plug into the mains socket. · Press the on/off button (15) « » to switch the coffee
maker on, the button (15) illumination will light up and flash, when the button (15) illumination will stop flashing and glow constantly, this means preheating is completed. · Press and hold the water supply button for one cup (16) «
» for 3 seconds to enter the setting mode, the button (16) indicator will flash, the pump will be switched on and water will flow into the cup. · When the required amount of water is poured into the cup, release the button (16) « », the button (16) « » illumination will flash twice, indicating the successful setting of the required amount of coffee, which will be prepared in the future use of the coffee maker.
Notes:
– you can set the amount of ready coffee for one cup from 20 to 60 ml;
– if the set amount of coffee is less than 20 ml, the button (16) « » illumination will immediately go out, indicating that the setting is failed, and the amount of ready coffee will be set according to the last setting;
– if the set amount of coffee is 60 ml, the water pump will be switched off automatically, the button (16) « » illumination will flash twice, indicating that the maximum amount of 60 ml of coffee is successfully set.
Two cups of coffee portion setting
– Two cups of coffee portion setting is similar to setting one cup of coffee portion.

EN 11

– Press and hold the water supply button for two cups · Simultaneously press and hold the buttons (16) « »

(17) « » for 3 seconds to enter the setting mode, the button (17) indicator will flash, the pump will be switched on and water will flow into the cup. – When the required amount of water is poured into

and (17) « » for 5 seconds, the illumination of all four buttons on the control panel (7) will flash twice, after that the coffee maker will be switched back to the factory settings.

the cup, release the button (17) « », the button

MAKING CAPPUCCINO

(17) « » illumination will flash twice, indicating the successful setting of the required amount of coffee, which will be prepared in the future use of the coffee maker.
Notes:
– you can set the amount of ready coffee for two cups from 40 to 100 ml;
– if the set amount of coffee is less than 40 ml, the
button (17) « » illumination will immediately go out, indicating that the setting is failed, and the amount of ready coffee will be set according to the last setting; – if the set amount of coffee is 100 ml, the water pump will be switched off automatically, the button (17) «
» illumination will flash twice, indicating that the maximum amount of 100 ml of coffee is successfully set.
RETURN TO THE FACTORY SETTINGS
· Make sure that the steam supply is closed, to do this
turn the handle (9) « » clockwise until bumping «0». · Switch the coffee maker on and wait for preheating, the
button (15) « » indicator will glow constantly.

ATTENTION! Be careful to avoid burns by the released hot steam.
· Make coffee, as described in the chapter «MAKING ESPRESSO», in a cup with enough capacity to add frothed milk.
· Make sure that the steam control knob (9) « » is in the position «the steam supply is off «0».
· Press the steam supply button (18) « », the button (18)
lighting will flash. Wait until the button (18) « » lighting will stop flashing and start glowing constantly. Place any suitable bowl under the tip (11) for water. Carefully turn
the steam supply knob (9) « » counterclockwise for a quarter of a turn to remove the condensed fluid from the cappuccinator pipe (10). · After removing the condensed fluid close the steam
supply by turning the knob (9) « » clockwise until bumping «0». Note: some water or steam may appear from the filter holder (5), it is normal.
· Put the cappuccinator pipe tip (11) into a glass with cold milk or cream, the amount of milk or cream should be

12 EN

about 100 ml. Carefully turn the steam supply control
knob (9) « » counterclockwise for a quarter of a turn or more. The tip (11) should not touch the bottom of the glass, as this can hinder the steam release; you can make thick frothed milk in several seconds (pic. 2, 3). Note:
– to avoid steam overheating, the steam supply is limited to 150 seconds, after that the steam supply will be switched off automatically;
– to avoid splashing milk always immerse the tip (12) deeper than 1 cm from the milk surface.
– to avoid splashing milk or cream, do not open the
steam supply with a sharp turn of the knob (9) « »,
always turn the knob (9) « » carefully. – when selecting a cup for milk or cream, keep in mind
that the frothed milk amount increases approximately twice; · The outgoing steam creates whirls which froths milk; from time to time lift and lower the bowl with milk against the tip (11) to make the milk foam (pic. 4). · Making the milk foam is an art. You may not make it at the first try, don’t worry and experiment until you achieve good results. · When frothing milk you can remove the tip (11) and try to froth milk directly with the steam releasing from the cappuccinator pipe (10).
· Close the steam supply by turning the knob (9) « »
clockwise until bumping «0».

· Add frothed milk to the ready espresso, and the cappuccino is ready. Add sugar to your taste, you can decorate frothed milk with cocoa powder.
· Switch the coffee maker off by pressing the on/off button (15) « ».
IMPORTANT:
– It is important that milk for making frothed milk is fresh and without additives.
– Take usual whole milk with fat status from 4% to 6%, cream fat status is not less than 10%.
– Clean the cappuccinator pipe tip (11) right after milk or cream frothing — to do this put the cappuccinator pipe tip (11) into a glass of water and switch the steam supply on by pressing the button (9), turn the steam
supply knob (9) « » counterclockwise to release some steam. After that close the steam supply by
turning the knob (9) « » clockwise until bumping «0». Switch the steam supply off by pressing the steam supply button (9) and switch the coffee maker off. – Wait until the coffee maker cools down and remove the tip (11) from the cappuccinator pipe (10), wipe the outer side of the cappuccinator pipe (10) with a soft damp cloth and wash the tip (11) under a water jet. Note: after frothing milk, if you press the water supply
button (16) « » or the button (17) « », and the button
(16) « » and (17) « » illumination will be flashing quickly, the pump will not switch on, because the water temperature in the boiler is high. To decrease the water

EN 13

temperature, place a cup under the tip (11), turn the knob
(9) « » counterclockwise and drain hot water. When the buttons (16, 17) illumination glows constantly, the pump
will stop operating, turn the knob (9) « » to the position «0». After that you can continue making coffee.

HOT WATER AND ITS USAGE

· You can use hot water for warming the cups before making coffee or, for instance, for brewing tea.
· Switch the coffee maker on by pressing the on/off button (15) « », the button (15) lighting will light up and flash, when the button (15) lighting stops flashing and glows constantly, the coffee maker is ready for usage.
· Place a cup under the tip (11), carefully turn the steam supply control knob (9) « » counterclockwise for a quarter of a turn or more, hot water will flow into the cup.
· Switch the water supply off by turning the steam supply control knob (9) « » clockwise to the «0» position to stop hot water supply. – Note: – at the time when you pour hot water out, the buttons (16, 17) lighting will flash.
WARMING THE DRINKS
You can warm up your drinks by putting the cappuccinator pipe (10) without the tip (11) into the cup with the drink.
· Switch the coffee maker on and wait for the coffee maker to preheat.

· Put the cappuccinator pipe (10) without the tip (11) into the cup with the drink you want to warm up. Carefully turn
the steam supply control knob (9) « » counterclockwise. · Close the steam supply by turning the knob (15) « »
clockwise until bumping «0». Switch the coffee maker off by pressing the on/off button (15) « ».
Note: some water or steam may appear from the filter holder (5), it is normal.
REMOVING MINERAL SCALE
After using the coffee machine for 2-3 months (depending on the hardness of the water in your region), when you switch on the coffee machine with the « » button (15), the indicators of all four buttons (15, 16, 17, 18) on the control panel (7) will flash 5 times simultaneously to remind you to clean the coffee machine of mineral deposits.
ATTENTION!
· You can temporarily deactivate the mineral deposits reminder by simultaneously pressing and holding the
buttons (16) « » and (18) « » for 3 seconds, after which you can make, for example, coffee. · Do not delay cleaning the coffee maker from mineral deposits for a long time and carry out the cleaning as soon as possible. 1. Make sure that the power plug is not inserted into the
mains socket.

14 EN

2. Make sure that the steam supply is closed. To do this
turn the knob (9) « » clockwise until bumping «0». 3. Make citric acid solution: 2 teaspoons of acid to 1
litre of water and pour the solution into the water tank (14). Install the tank (14) back to its place. 4. Insert one of the coffee filters (6) into the holder (5). Do not put ground coffee into the filter (6). 5. Install the filter holder (5) into the coffee maker. The holder (5) ledges should match the grooves on the boiler « », after that turn the filter holder handle (4) to the right until bumping « » (pic. 1). 6. Place a suitable cup on the grid (2). 7. Insert the power plug into the mains socket. 8. Switch the coffee maker on by pressing the on/off button (15) « », the button (15) lighting will light up and flash, when the button (15) lighting stops flashing and glows constantly, this means that the preheating is completed.
9. Press the button (17) « », after the pump switches
off, press the button (17) « » again, it is necessary to pour water out of the boiler and fill it with citric acid solution. Pour the liquid out of the cup. 10. Wait for a few minutes, then switch the water supply
on by pressing the button (17) « », after the pump
switches off, press the button (17) « » again, pour the liquid out of the cup. 11. After a while repeat the procedure described in the paragraph 10.

12. Press the steam supply button (18) « » and wait
until the button (18) lighting « » stops flashing and glows constantly. Put a suitable bowl under the tip (11) and slightly open the steam supply by turning
the knob (9) « » counterclockwise. Carefully turn
the handle (9) « » to the maximum steam release position, the steam release time is limited to 65 seconds, close the steam by turning the handle (9) «
» clockwise until bumping «0». 13. Switch the coffee maker off by pressing the on/off
button (15) « »,. Wait for 10-15 minutes. 14. Perform the steps 10 and 11 at least 3 times. 15. Repeat the cleaning procedure for the steam release
channels described in the paragraph 12. 16. With small intervals, repeat the boiler cleaning
procedure (paragraph 10) until the citric acid solution dissolves in the tank (14) completely. Note: to reset the coffee maker operating cycles, after cleaning the coffee maker from mineral deposits, in standby mode, simultaneously press and hold the water supply button for one cup (16) « » and the steam supply
button (18) « » for 3 seconds, the illumination of all four buttons on the control panel (7) will flash three times, the number of coffee maker operating cycles will be reset to zero.
17. Switch the coffee maker off by pressing the on/off button (15) « ».

18. Fill the water tank (14) with clear water until maximal level and repeat the steps 10, 12 at least 3 times without the 10-15 minute break.
19. Switch the coffee maker off by pressing the on/off button (15) « ».
Note: to remove the scale you can use special descaling agents for coffee makers and coffee machines, strictly following the instructions on their usage.

CLEANING THE COFFEE MAKER

· If there is ground coffee scale remainin in the filter (6) openings, clean the filter (6) with a small brush.
· Wipe the coffee maker body with a soft, slightly damp cloth and then wipe the coffee maker body (12) dry. Do not use abrasives and solvents to clean the coffee maker body.
· Do not immerse the coffee maker body (12), the power cord and the power plug into water or any other liquids.
· Wash the removable parts of the coffee maker with warm water and neutral detergent, then rinse them and dry.
DRIP TRAY
· A red pop-up indicator (3) in the grid (2) will show when the tray (1) is full.
· Remove the grid (2) from the tray (1), remove the tray (1) and pour out water, install the tray back to its place, put the grid (2) on the tray (1).

EN 15

· If necessary, wash the tray (1) and the grid (2) with water and soft detergent, rinse and dry.
STORAGE
· Before taking the coffee maker away for long storage, unplug it and let the unit cool down.
· Clean the coffee maker. · Pack the coffee maker in the original package. · Use and store the coffee maker at the temperature
above 0 °C. · Keep the coffee maker in a dry cool place out of
reach of children and disabled persons.