Hurtle HURFS56 3 Wheeled Scooter for Kids User Manual

Hurtle HURFS56 3 Wheeled Scooter for Kids

Product Information

• Specifications
  • Model: HURFS56 – HURFS66
  • Name: ScootKid 3-Wheel Kids Scooter
  • Features: Built-in LED Wheel Lights, Fold-Out Comfort Seat
  • Age Recommendation: Ages 1+
  • Max Weight: 60 kg

Product Usage Instructions

• Assembly and Safety
  • Before allowing your child to use the scooter, ensure the steering rod is fully engaged and all screws are tight.
  • Check that the wheels are correctly secured and show no signs of wear.
• Operating Safety Instructions
  • Practice in traffic-free areas or open asphalt play areas.
  • Wear shoes with rubber soles and avoid using them in vehicle traffic.
  • Regularly check and tighten screws to prevent accidents.
  • Avoid riding in wet conditions and on uneven surfaces.
  • Always observe traffic rules and regulations.
• Braking
  • The brake is designed to reduce speed on flat surfaces. Avoid going downhill.
  • Use the brake at low speed by gently pushing your foot against the back wheel plate.
  • Practice at walking speed to avoid abrupt stops and potential falls.

FAQs

• Q: Can my child perform stunts or tricks on the scooter?
  • A: No, the scooter is not designed for stunts or tricks. Misuse can lead to accidents and injuries.
• Q: What should I do if the brake gets hot?
  • A: If the brake gets hot, allow it to cool down before further use. Avoid prolonged braking to prevent burns.

Wear protective gear when riding Adult supervision for assembly and use

GENERAL

• We can rest assured that you have acquired a high-quality product and also we offer you an excellent after-sales service.
• Before you convince yourself of the unique driving experience offered by your new scooter, please read the attached instructions carefully.
• They include these instructions in a safe place so that you can refer to them in the future.
• Please kindly note that the product specifications are subject to change without notice, thanks for your kind attention.
• Have fun with your new scooter!

Important Instructions and Warnings

IMPORTANT:

• Before you allow your child to use our scooter, please read the operating safety instructions carefully first, and ensure that the steering rod is fully engaged and all the screws are tight.
• Also, ensure that the wheels have been correctly secured and that they show no signs of wear.

IMPORTANT:

• Undoing the axle screws several times will reduce the effect of the screw-securing product. This means that the screws may come loose by themselves.
• You should therefore always check the screws regularly and use the scooter after tightening the screws.

WARNING:

• Adult required, this product contains small parts while unassembled.
• The toy needs to be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
• The wearing of helmets protective equipment for elbows, knees, wrists and palms as well as shoes with at rubber soles is recommended.
• Close the quick-action lock securely and ensure that it is correctly positioned.
• Do not ride down slopes.
• The child must be supervised.
• The brake can become hot.
• Maximum permissible weight: 50 kg.

OPERATING SAFETY INSTRUCTIONS

• The child should practice first to gain control of the scooter. We recommend that you practice your scooter in a traffic-free car park or open asphalt play areas.
• Ensure that your child always wears a helmet, wrist, elbow and knee pads, as well as shoes with rubber soles. Not to be used in traffic 60 kgs max.
• Ensure that your child does not attempt any experiments or risky maneuvers with it. Riding style should always be adjusted to the personal skill of the rider.
• Ensure that your child does not travel at speeds exceeding 5 km/h.
• Ensure that your child does not ride on roads, paths or other places with motor vehicle traffic.
• Ensure that your child does not make any modifications or alterations to your scooter that would put your safety at risk. If you do, the guarantee is expired.
• Ensure that your child does not ride the scooter in the dark or at night. Only one child may ride on the scooter.
• Ensure that your child does not ride down any steep hills. The brake is not designed to decelerate from high downhill speeds.
• Always look ahead while you ride so that you can quickly stop at any time. The brake can get hot with prolonged use. Avoid skin contact.
• The brake pad becomes hot when it is used. Make sure that your child does not keep the brake on for a long period. Explain to your child that direct skin contact may cause burns.
• The scooter must not be used on wet, oil, sandy, icy, rough or uneven surfaces. Never use the scooter in wet conditions.
• Kerbstones and cobblestone pavements affect your balance. It Is better to get off. Even lowered kerbstones can knock you off balance.
• Watch out for longitudinal and transverse grooves in the asphalt! The narrow wheels may get stuck In tram ralls and manhole covers, for example, and lock up.
• Some metal parts may corrode after a certain time, especially when used near the sea or left outdoors too often.
• The scooter may not be used on public roads. When boarding in pedestrian walking areas, keep to the correct side according to the rules of the road as much as possible. Watch out for Pedestrians, Wheelchair users, Cyclists, rollerblades and Animals. Always observe traffic rules and regulations.
• Load capacity is up to 50 kg body weight for the scooter.
• Scooter for 3+ years old
• Always take care not to risk injuring fingers when folding and unfolding the scooter.
• Explain to your child the risks of using the scooter and how to use it. Supervise your child while they are using the scooter. HAVE FUN WITH YOUR NEW SCOOTER!

PLAY INSTRUCTIONS

• Hold on to the ends of the T-Bar or Ring Bar with your hand.
• You steer the board through the slightest of weight displacements.
• To get underway, you stand with one leg (the foot approx at 45° angle to the direction of travel) on the board and push yourself off using the other leg.
• If you stand with your right leg on the board, you can use your left leg to accelerate.
• If you stand with your left leg on the board, you can use your right leg to accelerate.
• After gaining momentum you stand with your legs apart on the board so that both feet are approx at 45° angle to the direction of travel. Enjoy your scooter!

WARNING:

• Do not attempt or do stunts, tricks or rider/roll backwards on your scooter.
• It is not made to withstand abuse from misuse, such as jumping, curb grinding or any other type of stunt.
• Racing, stunt riding or other maneuvers, such as trying to ride backwards, also enhance the risk of loss of control or may cause uncontrolled rider actions or reactions.
• Aggressive riding reduces your ability to maneuver and control.
• Take necessary precautions and practice in a safe area.

BRAKE

• The brake is a friction brake and only designed for reduction of speed on flat surfaces -avoid going downhill.
• Brake at low speed by gently pushing your foot, resting far back on the board, against the back wheel plate. You need to push harder if you are travelling faster.
• Be careful, however: if you push the brake too hard and slow down too abruptly, you may risk falling. It is best to practice how to use brakes at walking speed.
• Attention: The brake and protection plate can get very hot.

HURFS56 – HURFS66:

• Age: 3+year (Recommend)

ASSEMBLY

SCOOTER ASSEMBLY

WARNING: Keep the kids at a safe distance while assembling the scooter to avoid accidental injuries.

• Push the Red Button (M), Handlebar (T), and Fixing Sleeve (S), as shown in Figure A.
• Scooter Hole (H), as shown in Figure B.
• Press Red Push Button (M). Insert the Handlebar (T) with the flat side backwards in Scooter Hole (H), as shown in Figure C. Until you hear a “click” sound ensure the Handlebar (T) is securely locked in the Scooter Body.
• Pull the Fixing Sleeve downward to strengthen the stability of the Handlebar (T) and Scooter Body, as shown in Figure D.
• Adjustable T-Bar handlebar with 3 heights to accompany the child’s development, as shown in Figure E.
• Finish the Scooter Assembly and adjust the Height as shown in Figure F.

SCOOTER DISASSEMBLE

WARNING: Keep the kids in a safe distance while disassembling the scooter to avoid accidental injuries.

• Scooter as shown in Figure A
• Pull the fixing sleeve upward as shown in Figures B & C.
• Press the Red Switch with one hand and use the other hand to pull the handlebar to separate the Handlebar and the scooter’s body as shown in Figure D.
• Finish disassembling the Scooter as shown in Figure E.

SEAT ASSEMBLY

WARNING: Keep the kids at a safe distance while assembling the scooter to avoid accidental injuries.

• Scooter as shown in Figure A
• Fix firmly with the screw with one hand.
• Adjustable seat housing with 3 heights to accompany the child’s development.
• Fold the seat housing
• Press the red push button. Insert the handlebar at the side backward in the scooter hole
• Finish as shown in Figure F.

SEAT DISASSEMBLY – FIRST METHOD

WARNING: Keep the kids at a safe distance while disassembling the scooter to avoid accidental injuries.

• Scooter as shown in Figure A.
• Fold the seat housing up as shown in Figure B.

SEAT DISASSEMBLY – SECOND METHOD

• Scooter as shown in Figure A.
• Press the red button, remove the handlebar from the hole on the scooter
• Loose the screw, press the red button and remove the sleeve and seat housing.
• Press the red button, insert the sleeve and handlebar into the scooter
• Finish as shown in Figure E

HEIGHT ADJUSTMENT

WARNING: Tighten the Collar Clamp to secure the T-Bar after adjustment.

• Loosen the lever of the Collar Clamp as shown in Figure A
• Adjust the T-Bar according to the child’s height. Tighten the Collar Clamp to ensure the T-Bar after adjustment, as shown in Figure B
• Lowest: 680MM as shown in Figure C
• Second: 730MM as shown in Figure D
• Third: 810MM as shown in Figure E
• Highest: 890MM as shown in Figure F

MAINTENANCE INSTRUCTIONS

Change Wheel

• The wheels wear down with time and can be damaged if overly used on rough surfaces.
• The back wheel on which the brake is applied is particularly affected after several hours of braking.
• In the interests of safety, they should be checked regularly and changed if necessary.

Left Wheel

• Turn the Allen Key counter-clockwise to loosen the screw

Right Wheel

• Turn the Allen Key clockwise to loosen the screw

Change Deck

1. Loosen the 6 screws (A) as shown in the picture (arrows).
2. Remove the deck and tighten the screw (A).
3. Check for tight fit after you have travelled about 5km with the new board.

Remove or Change the collar clamp

1. Loosen the 2 screws (E) and (F) as shown in the picture( arrows).
2. Pull the collar clamp upwards and remove it.
3. Tighten the screws (E) and (F).

SAFETY TIPS
The scooter is a new fun piece of product that is safe when used carefully and correctly. However, as with any sporting product, a small risk cannot be excluded and we recommend that you protect hand joints, elbows and knees from bumps and grazes. A helmet will also contribute to your safety. To ensure you do not slip it is best if you wear shoes with a rough sole. You should always adjust your speed according to your ability and the conditions and when in doubt, dismount if there is a risk of unseen traffic.

WARRANTY ITEMS

A month’s warranty covering defects in material and workmanship is provided for the scooter starting from the date of purchase. During the warranty period, we will inspect and decide that the problem has been caused by a defect in material or workmanship, your scooter will either be repaired or replaced with an identical or equivalent scooter. If you need repair or replacement, please directly contact your local seller or distributor.
The warranty shall not include damage caused by:

1. This warranty only applies to initial purchasers.
2. Improper attempts at repair or modifications of the scooter.
3. External influences (eg. impact against curb stones, rails, obstacles on the road, etc.)
4. Improper usage, usage for purposes other than those intended, negligent handling or normal wear and tear.

No person, seller, or distributor shall be allowed to modify or supplement the terms and conditions of this limited warranty.

Features

• Mini Kick Scooter Fun
• 3-Wheel Tricycle ‘Trike’ Style
• Sit or Stand Kick Scooter Design
• Lightweight, Compact & Portable
• Convenient Fold-Out Child Comfort Seat
• Multi-Color LED Wheel Lights Illuminate When Rolling
• The seat is Removable for Standard Scooter Riding
• Unique Foot Rest & Seat for Cruising
• Adjustable T-Bar Handlebar Height
• Anti-Slip Wide Floor Foot-Base Deck
• Multi-Wheeled Scooter Stability
• Long Lasting, Super Smooth Gliding Wheels
• Easy Maneuvering Lean-to-Steer Technology
• Lab Tested & Safety Certified
• Indoor/Outdoor Use
• Suitable for Ages 1+
• Fun for Kids: Small Children & Young Toddlers

Technical Specs:

• Handlebar Height Setting: 25.5’’, 27.5’’, 31.0’’, 34.0’’ -inches
• Wheel Size Diameter: 120mm Front, 80mm Rear
• Construction Material: Aluminum Metal, Engineered ABS
• Wheel Type / Wheel Material: Engineered Polyurethane
• Recommended Age: 1 Year and Up
• Weight Capacity: Up to 132 lbs. (Seat Capacity: 45 lbs.)

Questions? Issues?

• We are here to help!
  • Phone: (1) 718-535-1800
  • Email: support@pyleusa.com.
  • Child & Toddler Toy Scooter with Built-in LED Wheel Lights, Fold-Out Comfort Seat (Ages 1+)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>