SINMOS PR1600 Hunting Camera User Manual

SINMOS PR1600 Hunting Camera

Specifications

• Screen: 2.0 inch LCD
• Video Resolution: 4K/2.7K/1080P/720P
• Video Format: MP4
• Video Length: 5s-10Mins
• Photo Resolution: 60MP/48MP/42MP/36MP/32MP/24MP/20MP/16MP/8MP/4MP/2MP
• Image Format: JPG
• Photo Burst : 1P/2P/3P/4P/5P
• Trigger Time : 0.3s-0.6s
• IR Distance : 1-20 meters
• PIR Angle : 120 degrees
• Lens Angle : 100 degrees
• IR LED : 46pcs 940nm Automatic
• ISO: 100
• Memory Card : Supports 4G~128GB
• Battery: 8pcs AA batteries or DC 6V
• Standby Time: 6 months
• Waterproof: IP66
• Net weight : 300g
• Size: 1409873MM
• Certification: CE, FCC, ROHS
• Working Temperature: -10~+60°C / -14~+120°F

Product Usage Instructions

Power Switch and Setup:
To power on the camera and access setup mode:

1. Push the switch to SETUP.
2. On the screen, you can set the working mode and parameters.
3. Press the OK key and wait for 10 seconds.
4. The screen will close, and the camera will enter infrared detect mode.

Operation Keys:
To use the operation keys:

1. Push the switch to SETUP.
2. Press MENU to navigate settings.
3. Use the left and right keys to navigate, and the up and down keys to select.
4. Press OK to confirm selections.
5. Press REPLAY to start replay mode.

Recording Mode Setting:
To set the recording mode:

• Video Resolution: Choose from 4K/2.7K/1080P/720P.
• Video Length: Adjust between 5 seconds to 10 minutes.
• Audio Recording: Turn ON/OFF audio recording.

Photo Mode Setting
To set the photo mode

• Photo Quality: Select from various megapixel options.
• Photo Burst : Choose the number of consecutive shots.

Menu Setting
To customize menu settings like work time, detection delay, PIR sensitivity, motion test, fill light distance, date/time format, loop recording, beep sound, memory card format, language, password protection, factory reset, and version info.

Parameters
Detailed parameters of the device including screen size, video resolution, photo resolution, battery type, waterproof rating, etc.

Power Switch and SETUP

• OFF: The camera powered off；
• SETUP; The screen will open, and you can set the working mode and parameters, etc.
• ON: Press an OK key, wait 10, and the screen will close, and the camera will enter infrared detect mode.

Note: First push the switch to SETUP, setting MENU, and push the switch to ON!

The instruction of operation keys（Push the switch to SETUP）

MENU| The screen is open, press the MENU, the left and right keys to translation, the

up and down keys to select，the OK key to confirm.

---|---
REPLAY| Press REPLAY to start replay mode，the up and down keys to select，press the OK key to play/pause, and then press Replay to exit.
SHOT| Press SHOT to take/record pictures manually, and press SHOT to exit.
MODE| Press MODE to manually switch the photographing/recording mode.
∧| Up
∨| Down
< **| Left
> **| Right
OK| Confirm

Recording mode setting

Note: The audio recording function is synchronized with the recording, not recorded separately. If you select OFF, there is no sound in the video; Select ON, and the video has sound.

Photo mode setting

Menu setting

/Deutsch/Italiano/Spanish/Chinese/Poland/Japan
Password Protection| Off/On
Factory Reset| Reset to default settings
Version info| Firmware and Bluetooth version number

Operating instructions

1. Install 8pcs AA batteries（Pay attention to the anode and cathode and a 4GB~128GB memory card(Please format it before use);
2. Push the switch to SETUP， the screen is on, setting menu, mode, parameters, etc;
3. Push the switch to ON, press an ok key, and wait 10， the screen goes out the camera will enter infrared detect mode. If it can detect objects, it will take pictures/videos and save them in the memory card. If it does not detect objects, then the camera will enter standby mode.
4. Push the switch to SETUP the screen is on， press Replay it can replay the photo and video files, Press MENU and you can choose to delete photo/video files.
5. Push the switch to OFF, and the camera connects to the computer by USB cable, the screen is on， and you can browse the photo/video files of the memory card on the computer.
6. Google Play or APP store to search for the APP named TrailCam Go, or scan this QR code to download the APP software and install it on your phone.

Installed the APP on the phone, opened the Bluetooth and APP, added the camera to the APP, set the menu, reviewed files, downloaded, and deleted files with the app, etc.
Note:

1. If setting password protection, and forget the password, please install the batteries to the camera, press the UP and OK keys at the same time, and push the switch to SETUP, which will delete the password.
2. The camera will auto power off when no operation after 3 minutes.

INSTRUCTION

1. Scan the QR code to download the “TrailCam Go” app
2. Open “TrailCam Go” -Click “Tap to add a device” →”Wi-Fi Camera”.
3. Switch Camera to “ON” → “Next” → “connect camera”→ “loin”
   • a. Make sure your Wi-Fi and Bluetooth is open.
   • b. Make sure the phone is close enough to the camera.
   • Setting the device name→OK
   • Now you can see your trail camera in “Home, Click on it to access the settings.

Parameters

FCC STATEMENTS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

Frequently Asked Questions

• Q: How do I reset the password if I forget it?
  • A: Install batteries in the camera, press the UP and OK keys simultaneously, and push the switch to SETUP to delete the password.
• Q: What happens if there is no operation for 3 minutes?
  • A: The camera will auto-power off after 3 minutes of inactivity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>