Q Q Watches YP12598D MULTI FUNCTION SPORT LCDWATCH User Guide

Q Q Watches YP12598D MULTI-FUNCTION SPORT LCD WATCH

BUTTONS

• The operation of buttons are indicated using the letters shown in the illustration.
• Reset
• Mode
• EL backlight
• Start I Stop

DISPLAY

• The screen is shown in below:

ATTENTION

1. Never try to open the case or remove its back cover.
2. Do not operate buttons underwater.
3. Should moisture appear inside the watch, have it checked immediately by your dealer. Otherwise, it can cause erosion of the metal parts of the watch.
4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch.
5. Avoid exposing the watch to temperature extremes.
6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
7. Avoid to wear the watch in electromagnetic, static conditions.

MODE SELECTION

• Press “B” to change mode to mode in the following Sequence: Timekeeping Mode – Stopwatch Mode -Alarm Mode – Time Setting Mode.

TIMEKEEPING

• Hour, Minutes, Seconds, Day of the week;
• Build in Date.

STOPWATCH

• 1/100 second unit;
• Measuring range: O’00″00 23:59 59″.

ALARM

• The alarm sounds at the preset time each day;
• Hourly time signal;
• Snooze for 5 minutes.

TIME SETTING

• Hour, Minutes, Seconds, Month, Date, Day of week can be set.

ADJUST HANDS

• Pull out the crown, turn to adjust the hour and minutes hands;
• Push the crown go back the normal position after the time set;

TIMEKEEPING

Display The Date

• In the timekeeping mode, press and hold “D” to display the date.

On/Off The Alarm

1. In the timekeeping mode, press and hold “A” display the alarm time;
2. Press “D” at the same time to on/off the alarm.

On/Off The Chimne

1. In the timekeeping mode, press and hold “A” display the alarm time;
2. Press “B” at the same time to on/off the chime.

STOPWATCH
A Lap Time

1. In the stopwatch mode press “D” to start the stopwatch;
2. To stop the stopwatch by pressing “D” again;
3. Press “A” to reset the stopwatch.

Split Time

1. In the stopwatch mode, press “D” to start the stopwatch;
2. Press “A” to display the split time, stopwatch timing continueS internally;
3. Press “A” to clear the split time and to continue time measurement;
4. Repeat step 2 and 3, you can measure the multi-split time;
5. Press “D” to stop the stopwatch.

ALARM

Alarm Time Setting

1. In the alarm mode, the hour to flash;
2.  Press “D” to increase the hour, press and hold to increase at high speed;
3. Press “A” to select the minutes;
4. Press “D” to increase the minutes, press and hold to increase at high speed;
5. Press “B” to return the timekeeping mode, after you set.

Snooze

• The alarm sounds at preset time each day for about 60 seconds;
• Press “D” to break it, the alarm continues after 5 minutes;
• Press “A” to stop it.

TIME SETTING

1. In the time setting mode, the seconds to flash;
2. Press “D” to reset the seconds ;
3. Press “A” change to the next selection;
4. Press “D” to increase the number, press and hold to increase at high speed;
5. Repeat step 3 and 4, the selection in the following sequence: Seconds- Minutes -Hour-Date -Month -Day of week;
6. Press “B” to return the timekeeping mode, after you set.

BACKLIGHT

• The backlight that uses an EL (electroluminescent) cause the display to glow for easy reading in the dark.

Use EL Backlight

• In any mode, press “C” to illuminate the display about 3 seconds.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>