ASUS TUF Gaming VG27VH1B 27” Curved Monitor User Guide

ASUS TUF Gaming VG27VH1B 27” Curved Monitor

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified, or altered, unless such repair, modification or alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owner’s benefit, without intent to infringe.

Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.

Safety information

• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazards, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL-listed computers that have appropriate configured receptacles marked between 100 ~ and 240V AC.
• The socket outlet shall be installed near the equipment and shall be easily accessible
• If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
• Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains.

WARNING
Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with a mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor

• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING
Information to prevent injury to yourself when trying to complete a task.

CAUTION
Information to prevent damage to the components when trying to complete a task.

IMPORTANT
Information that you MUST follow to complete a task.

NOTE
Tips and additional information to aid in completing a task.

Where to find more information
Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com

2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Welcome
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you!

Package contents

Check your package for the following items

1. LCD Monitor
2. Base
3. Stand
4. Quick Start Guide
5. Warranty Card
6. 1x Power Cord
7. 1x HDMI Cable (optional)
8. 1x VGA Cable (optional)
9. 1x Audio Cable (optional)

• If any of the above items is damaged or missing, contact your retailer immediately.

Assembling the monitor

To assemble the monitor

• While assembling the monitor arm/base, we recommend that you keep the monitor inside its EPS (Expanded Polystyrene) packaging.

1. Align the screw hole on the arm with the bundled screw on the base. Then insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.

Connect cables

Rear of the LCD monitor

1. Earphone – out Port
2. Audio – in Port
3. VGA Port
4. HDMI Port
5. AC-IN Port
6. Kensington Lock
7. DP – in Port
8. HDMI1 Port
9. HDMI2 Port

Monitor introduction

Using the Controls button

Use the control button on the bottom of the monitor to adjust the image settings.

1. Power Indicator
   The color definition of the power indicator is as the below table.

2. Power Button:
   Press this button to turn the monitor on/off.

3. GameVisual Button:
   Press this hotkey to switch from seven video preset modes
   (Scenery Mode, Racing Mode, Cinema Mode, RTS/RPG Mode, FPS Mode, sRGB Mode and MOBA Mode) with GameVisual™ Video Intelligence Technology.

4. GamePlus Button:
   GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
   To active GamePlus
   Press GamePlus Button to enter the GamePlus main menu.
   Activate Crosshair, Timer or FPS Counter or Display Alignment function.
   Move the button up/down to select and press confirm the function needed. Press to go off, and exit.
   Crosshair/Timer/FPS Counter is movable by pressing 5-way key.

5. Close Button:
   • Exit the OSD menu.

6. (5-way) Button:
   Turns on the OSD menu. Enacts the selected OSD menu item.
   Increases/Decreases values or moves your selection up/down/left/right

Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +23˚ to -5˚ and it allows 15˚ swivel adjustment from either left or right. – 5 ~ 23

Detaching the arm/stand (for VESA wall mount)

The detachable stand of this monitor is specially designed for VESA wall mount.

To detach the arm/stand

1. Disconnect power and signal cables. Carefully put the monitor facedown on its EPS packaging.
2. Remove the screws covers.
3. Remove the four (4) screws securing the arm to the rear of the monitor.
4. Detach the stand (arm and base) from the monitor.

• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with a minimum weight/load of 28.8 kg (Screw size: M4 x 10 mm).

Outline dimension

Unit: mm

OSD (On-Screen Display) menu

How to reconfigure

VG27VH1B

VG27WQ1B

1. Press Central of 5-way to activate the OSD menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the Center key.
4. Press the and buttons to select the desired parameter.
5. Press the Center key to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes.
6. Press the ◄/► to move left / right menu.

OSD Function Introduction

Gaming
This function contains seven sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.

VG27VH1B

VG27WQ1B

• OverDrive : The adjusting range is from 0 to 100.
• FreeSync : It can allow a FreeSync-supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free, and low-latency display updates.
• ELMB : Check to decrease motion blur and minimize ghosting part when on-screen objects are fast-moving.
• GamePlus : The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, the Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
• GameVisual: This function contains seven sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
• Shadow Boost : Dark color enhancement adjust the monitor gamma curve to enrich the dark tones in an image making dark scenes and objects much easier be found.

1. In the Racing Mode, the Saturation, and ASCR functions are not user-configurable.
2. In the sRGB, the Saturation, Skin Tone, Color Temp., Brightness, Contrast, and ASCR functions are not user-configurable.
3. In the MOBA Mode, the Saturation and ASCR functions are not user-configurable.

Image
You can adjust Brightness, Contrast, VividPixel, ASCR, Aspect Control, Blue Light Filter, Position, Focus, and Auto Adjust from this main function.

VG27VH1B

• Brightness : The adjusting range is from 0 to 100.
• Contrast : The adjusting range is from 0 to 100.
• VividPixel : ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
• ASCR : Select ON or OFF to enable or disable dynamic contrast ratio function,ASCR is Disabled when ELMB is on.
• Aspect Control : Adjusts the aspect ratio to “Full”, “16:9” and “OverScan”.
• Blue Light Filter : Adjust the energy level of blue light emitted from LED backlight.
• Position : Adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input).
• Focus : Reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input).
• Auto Adjust : Only available for VGA input.

4:3 is only available when input source is in 4:3 format。

Please refer to the following to alleviate eye strains:

• Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).

Color
Select the image color you like from this function.

• Color Temp : Contains three preset color modes (Cool, Normal, Warm) and User Mode.
• Saturation : The adjusting range is from 0 to 100.
• Skin Tone : Contains three color modes including Reddish, Natural, and Yellowish.

In the User Mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0 ~ 100.

Input Select
Select the input source from VGA or HDMI input signal.

MyFavorite
Load/Save all settings on the monitor.

System Setup
Adjusts the system configuration.

• Language : Select OSD language. The selections are English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai and Indonesian.
• Sound ： Adjusts the output volume level.
• ECO Mode : Activate the ecology mode for power saving.
• Power Indicator : Turn the power LED indicator on/off.
• Power Key Lock : To disable / enable power key.
• Key Lock : Disable all key functions. Pressing the down button for more than five seconds to disable key lock function.
• OSD Setup : Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
• Information : Displays the monitor information.
• All Reset : Selects “Yes” to revert all settings to the factory default mode.

Specifications

Troubleshooting (FAQ)

Supported Timing List

VG27VH1B
PC Timings List of HDMI2.0 / VGA input

VG27WQ1B
PC Timings List of HDMI2.0 / DP input

Frequently Asked Questions

What is the height of the monitor without the stand?

It is about 13 7/16

Does this monitor work good on the ps5?

So far the only game that i have played that utilizes the 1080p 120HZ is call of duty black ops Cold War. But it does operate pretty well. You can notice the difference. You just have to change your settings on the ps5 to performance mode. There should be YouTube videos on how to do it.

Does this come in a separate box from amazon?

Yes, the monitor box comes in an amazon box.

Could this moninter be wall mounted?

Yes, it can you just have to take the stand off.

Is it good for Xbox series x?

It's a 165hz monitor so you should be good I've had mine for over a year and it's amazing.

Does this curved monitor have height adjustment?

It does not, that I am aware of. Consider an adjustable arm mount, the monitor is very lightweight.

Can my 1650 nivda GeForce gtx run this at 165 hz?

Yeah, that's a pretty solid graphics card. You should be hitting in the 144-165 zone.

How tall can the monitor get on the stand?

It moves up and down about 8 to 10 inches with the monitor about 6 inches up from the desk to about 12 inches up.

Does this monitor have built in speakers? (not asking if it has an aux/headphone jack)

Yes, it does. Not the best quality but they do work.

Does this monitor work good with the Xbox X series?

This monitor is amazing. zero latency issues. It’s made for gaming.

Will this work with Xbox One X at 120hz?

It is a 144hz screen so 120hz on Xbox should be no problem... it's a great screen to link with a gaming laptop as well.

Which gives a better picture hdmi cable or display port cable?

There will be no difference in quality, but DP will be required if you want to hit the 165hz refresh rate. At this resolution, HDMI may cap out at around 100hz.

There is no display port only hdmi. How do I get 144hz out of this monitor?

You have to buy a DP to HDMI 2.0 adapter or chord. I had the same issue since the HDMI output of my laptop is not HDMI 2.0.

Download this PDF Link:ASUS TUF Gaming VG27VH1B 27” Curved Monitor User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>