Wurkkos TS25 EDC Rechargeable Flashlights User Manual

Wurkkos TS25 EDC Rechargeable Flashlights

Product Information

Specifications

• 4 main LEDs and 8 multi-color Aux LEDs
• Anduril 2.0 UI
• Powered by one 21700 battery
• Output: 4000lm (Max)
• Beam Distance: Up to 194m
• Impact Resistance: 1 meter/3.28 feet
• Water Resistance: IPX8

Product Usage Instructions

Quick Start

• Click to turn the light on or off.
• Hold the button to change brightness.
• Release and hold again to change brightness the other way.
• When on, 3 clicks toggle between stepless dimming and stepped modes.

Aux Button Light
In Advanced UI mode:

• 4 modes controlled by 7C: Off-Low-High-Blinking
• Color options controlled by 7H include Red, Yellow, Green, Cyan, Blue, Purple, White, Disco, Rainbow, and Voltage.
• Voltage color option indicates battery voltage through different colors.

Charge & Reverse Charging

• Max input/output: 5V 2.4A with USB C Rechargeable port.
• Power indicator flash orange while charging and turns solid orange when fully charged.
• In Reverse Charging mode, the power indicator turns orange; flashing blue indicates low battery.

For more advanced features, refer to the full user manual provided with the product.

Frequently Asked Questions (FAQ)

• Q: How do I change between different modes using the flashlight?
  A: To change between modes, use the following button presses:

  • 1C: One click. Press and then quickly release the button.
  • 1H: Hold. Press the button, but keep holding it.
  • 2C: Two clicks. Press and release quickly, twice.
  • 2H: Click, hold. Click two times, but hold the second press.
  • 3C: Three clicks. Press and release quickly, three times.
  • 3H: Click, click, hold. Click three times, but hold the final press.

The TS25 is a powerful EDC flashlight. It uses 4 pieces main LEDs and 8 peices multi color Aux LEDs,with Anduril 2.0 UI and powered by one 21700 battery. It will be your reliable partner for every day use and with fun.

ANSI/NEMA FL1 Chart

（Stepped modes）

Modes| H8（4000lm）| H7（1800lm）| H6（1050lm）| H5（480lm）| H4（130lm）| H3（60lm）| H2（18lm）| H1（1lm）
Runtime| 2h30min| 2h40min| 3h50min| 4h25min| 11h| 27h| 96h| –
Beam distance(m)| 194| 126| 94| 63| 33| 22| 12| –
Intensity (cd)| 9400| 3980| 2200| 1000| 275| 125| 37| –
Impact Resistance| 1 meter/3.28 feet
Water Resistance| IPX8
Note| The above mentioned parameters are based on tests according to international flashlight testing standards (ANSI/NEMA FL1) in our laboratory . Results may vary with different batteries or under different environmental conditions.

Specifications

• Emitter: 4 pieces 90 CRI LEDs and 8 pieces aux LEDs
• TIR Optics with protected glass
• Beam Angle: spot 25 degree, flood 124 degree
• Battery options: 1x 21700 Li-Ion battery
• Operating voltage: 2.8V – 4.2V
• Dimension: 109.7mm (length) × 32mm (head diameter)
• Weight: 77 ± 1 grams (without battery)
• flashlight body: Aerospace grade 6061 grade aluminum alloy
• Automatic Stepdown: Turbo mode steps down to High mode automatically to prevent overheating.

Electronic reverse polarity protection from improper battery installation
Advanced Temperature Regulation (ATR) technology
(The product uses copyrighted code released under the GNU Public License v3 (GPLv3).
To know about the exact source code used in the product, please go to https://tiny.cc/TKAnduril）

Operation Instructions

Quick Start

• Basic usage is simple:
  Click to turn the light on or another click to turn it off.

  • Hold the button to change brightness.
  • Release and hold again to change brightness the other way.
  • When on 3 clicks to toggle between stepless dimming and stepped modes

• Aux button light(work in Advanced UI):
  Just like with single-color aux in Anduril, RGB aux has 4 “modes” that are controlled by 7C: Off-Low-High-Blinking

• But RGB aux adds color options that are controlled by 7H:
  Red–>Yellow (red+green)–>Green–>Cyan (green+blue)–>Blue–>Purple (red+blue)–>White (red+green+blue)–>Disco (random colors)–>Rainbow (changes colors in order)–>Voltage (changes color based on LED voltage)

• When in the Voltage color option, the colors are:

  • 4.4V: white-ish (red+blue+green)

  • 4.1-4.4V: purple (blue+red)
  • 3.9-4.1V: blue
  • 3.7-3.9V: cyan (green+blue)
  • 3.5-3.7V: green
  • 3.3-3.5V: yellow (red+green)
  • 2.9-3.3V: red
  • < 2.9V: off

• By default, Anduril 2 is set up to use:

  • While off: low brightness, voltage color mode
  • While locked out: blinking, disco mode
    I think you are in Voltage mode, which is the default. So the color is changing based on the battery voltage. When the flashlight is used, it causes the battery’s voltages to drop a little bit. The voltage goes back up slightly when you turn the flashlight off and the battery rests for a second.

• Charge &Reverse Charging: Max input/output 5V 2.4A with USB C Rechargeable port.

• When charging: power indicator flash orange and turns to orange after full.

• Reverse Charging: Power indicator turns orange , while the indicator flash blue, means low battery.

That is all the user needs to know for basic use, but there are many more modes and features available for people who want more.

Before reading the rest of this manual, it is recommended that users look at the Anduril UI diagram(s), which should be provided along with the flashlight.

Button presses
Button presses are abbreviated using a simple notation:

• 1C: One click. Press and then quickly release the button.
• 1H: Hold. Press the button, but keep holding it.
• 2C: Two clicks. Press and release quickly, twice.
• 2H: Click, hold. Click two times, but hold the second press.
• 3C: Three clicks. Press and release quickly, three times.
• 3H: Click, click, hold. Click three times, but hold the final press.

The same pattern is used with higher numbers too. For example, 10C means ten clicks… and 10H means ten clicks but hold the final press.

Simple UI Diagram

Not everything is covered in the diagram, please read the text.

Simple UI
By default, the light uses a simple UI. This is useful if you lend the light to someone else, or if you just don’t want to bother with any crazy disco modes. Simple UI has all the basic functions needed to work as a flashlight, but the minimum and maximum brightness are limited to make it safer, and any complex or advanced functions are blocked.

Functions available in Simple UI include:

• 1C: On / off

• 1H: Ramp up (or down, if button was released less than a second ago)

• 2H: If light is on: ramp down
  If light is off: momentary high mode

• 2C: Double-click to go to/from highest safe level

• 4C: Lockout mode.

Some other modes and functions are available too. When the light is off, these are the options:

• 3C: Battery check mode. (displays voltage once, then turns off)
• 4C: Lockout mode.
• 10H: Switch to Advanced UI.
• 15C or more: Version check.
• 7H: Aux LED mode adjust

In Lockout mode with Simple UI, there are a few functions:

• 1H: Momentary moon
• 2H: Momentary low
• 4C: Unlock and turn on
• 4H: Unlock and turn on at low level
• 5C: Unlock and turn on at high level

To change between Simple UI and Advanced UI, turn the light off and then do one of these:

• In Simple UI:
  • 10H: Go to Advanced UI.
• In Advanced UI:
  • 10C: Go to Simple UI.
  • 10H: Configure Simple UI.

If you get lost, or if you want to auto-calibrate the temperature sensor, do a Factory Reset. The process for this is:

• Loosen body tube
• Hold button
• Tighten body tube
• Keep holding the button for about 4s

The light should flicker while getting brighter, then briefly burst to full power. Hold until it reaches full power to do a reset, or let go of the button early to abort.

Advanced UI
Advanced UI has all the advanced functions which are fun to play with but also hard to learn. Please refer the UI diagram below. Please ask us for pdf file so you can ready easily. We can also send video link to show how to play with Anduril2

Safety Instructions

• Operating the flashlight for a long time in Turbo or High mode will warm it up. This is normal.
• When installing the battery, make sure the anode (+) side always faces towards the head/LEDs.
• Unscrew the tailcap half a turn to avoid unwanted activation during transport. It also prevents the battery from draining while the flashlight is in standby.
• Avoid hitting or dropping the flashlight.

Troubleshooting and Maintenance

• Disassembling the sealed head can damage the flashlight and void the warranty.

• Wurkkos Ltd. recommends using high-quality brand batteries. Damage by battery leakage voids the warranty.

• Remove the battery if the flashlight will not be used for an extended period.

• To prevent self-discharge or accidental activation during storage or transportation, unscrew the tailcap by half a turn or remove the battery.

• Every 6 months threads should be wiped with a clean cloth followed by a thin layer of silicone grease.

• To maintain a proper level of waterproofness, replace worn-out o-rings with an approved spare.

• Troubleshooting: Clean battery contacts regularly as dirty contacts may impair the performance of the flashlight. If you experience problems (flicker, shine intermittently or failure turn on) the following root causes and solutions should be tried:

  • Reason A: The battery needs a replacement.
    Solution: Replace the battery with an approved type of fully charged battery.

  • Reason B: Threads, PCB board contact or other contacts are dirty.
    Solutions: Please clean the contact points with a cotton swab soaked in rubbing alcohol.

  • Reason C: The flashlight will not turn on upon first use.
    Solution: Please do not forget to remove the insulation sticker from the battery on first use.

If the above methods do not work please refer to the warranty policy before contacting your authorized distributor.

Andúril 2

Wurkkos Limited:

E-Mail: Amazon contact: us@wurkkos.com; eu@wurkkos.com; support@wurkkos.com
Website contact: wurkkos@foxmail.com
Web: www.wurkkos.com
Tel: +86-13728792565
Adresse: No.1 Qinglin Industrial Center, Guanlan Street, Longhua New District, Shenzhen 518000, China

References

• WURKKOS FLASHLIGHT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>