metos BM 4318807 Nova Heated Unit User Manual

metos BM 4318807 Nova Heated Unit

Product Information

Specifications

• Product Name: NOVA HEATED UNITS – BAIN-MARIE BM CERAMIC PLATE CPL
• Types: 450, 800, 1200, 1600
• Model Numbers: BM 4318807, 4318837, 4318847, 4319007, 4319037, 4319047; BM H 4318810, 4318826, 4318850, 4318882, 4319010, 4319026, 4319050; CPL 4318809, 4318839, 4318849, 4319009, 4319039, 4319049; CPL H 4318812, 4318828, 4318852, 4319012, 4319028, 4319052

Product Usage Instructions

General Guidelines

1. Carefully read the instructions in the manual for proper installation, use, and maintenance.
2. Keep the manual in a safe place for reference by operators.
3. Installation must follow the manufacturer’s instructions and local regulations.
4. Only qualified persons should connect the appliance to the electric supply.
5. Users must be trained in operating the appliance.

Symbols Used

• STOP: Indicates a safety risk situation that requires mandatory instructions to prevent injury.
• Right Way Symbol: Shows the correct way to prevent damage or hazardous situations.
• Recommendations Symbol: Provides recommendations for optimal performance.

Safety Instructions
If the appliance is not used for a long time, unplug it from the power supply, clean it, and wipe it dry inside.

Disposal
Contact local authorities for proper disposal instructions due to special components in the appliance.

Functional Description

Intended Use
The appliance is designed for [Describe the intended use of the appliance here].

FAQ (Frequently Asked Questions)

• How often should the appliance be serviced?
  The appliance should undergo periodic function checks as per the manual instructions and be serviced by a qualified person using original spare parts.

• What should I do in case of appliance failure?
  If the appliance fails or malfunctions, switch it off immediately and contact a qualified service person authorized by the manufacturer.

Models Numbers

Metos Nova

• BM 4318807, 4318837, 4318847, 4319007, 4319037, 4319047
• BM H 4318810, 4318826, 4318850, 4318882, 4319010, 4319026, 4319050
• CPL 4318809, 4318839, 4318849, 4319009, 4319039, 4319049
• CPL H 4318812, 4318828, 4318852, 4319012, 4319028, 4319052

General

• Carefully read the instructions in this manual as they contain important information regarding proper, efficient and safe installation, use and maintenance of the appliance.
• Keep this manual in a safe place for eventual use by other operators of the appliance.
• The installation of this appliance must be carried out according to the manufacturer’s instructions and following local regulations. The connection of the appliance to the electric supply must be carried out by qualified persons only.
• Persons using this appliance should be specifically trained in its operation.
• Switch off the appliance in case of failure or malfunction. The periodical function checks requested in the manual must be carried out according to the instructions. Have the appliance serviced by a technically qualified person authorized by the manufacturer and using original spare parts.
• Not complying with the above may put the safety of the appliance in danger.

Symbols used in the manual

• This symbol informs about a situation where a safety risk might be at hand. Given instructions are mandatory to prevent injury.
• This symbol informs about the right way to perform to prevent bad results, appliance damage or hazardous situations.
• This symbol informs about recommendations and hints that help to get the best performance out of the appliance.

Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of the part must be carried out by qualified persons only.

Checking the relationship between the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the manuals are missing, it is possible to order new ones from the manufacturer or the local representative. When ordering new manuals it is essential to quote the serial number shown on the rating plate.

Safety

Safe use of the appliance
For safe use of the appliance, observe the following safety instructions:

• When moving or servicing the appliance, always unplug it from the power supply.
• While cleaning the appliance, be cautious not to allow the electrical devices to come into contact with water. Spraying water near the appliance is forbidden.
• Exposing the appliance to the rain is forbidden.
• Only connect the appliance to an earthed socket.

If the appliance is not used for a long time, it should be unplugged from the power supply, cleaned and wiped dry on the inside.

Disposal of the appliance
The appliance contains parts and components, the disposal of which requires special treatment. Contact local authorities to obtain instructions on how to dispose of the appliance.

Functional description

Intended use of the appliance

• Nova heated units are intended for short-time storage and distribution of foodstuffs in dining rooms and restaurants.
• The manufacturer shall not be held liable for situations that may arise from failure to comply with the warnings and instructions given in this manual.

Use for other purposes

• Use of the appliance for any other purposes is prohibited.
• Consult the manufacturer in case you intend to use the appliance for other purposes than stated above.

Functional description

Operating switches

Heated BM and ceramic plate CPL

1. Main switch
2. Switch for Halotherm heat lamp or LED-strip
3. Cold
4. Hot

• 1. Main switch
• 3. Cold
• 4. Hot

Operating instructions

Operation

Bain-marie
Before placing products in the unit, wait until it has reached the temperature set with the thermostat.

Correct cold storage of foodstuffs facilitates kitchen activities and affects energy consumption:

• Do not load products until the appliance has reached the correct operating temperature.
• Monitor the internal temperature of the unit daily.
• Always keep the products in good order.
• Do not store spoilt food in the unit.
• In normal conditions, the thermostat need not be adjusted.
• Close the water valve and fill the basin with hot water for up to a minute. level of 3 cm.
• Never use the bain-marie without water in the basin.
• When emptying the basin, beware of hot water.
• GN containers or lids should be used on top of the basin to maintain the correct storage temperature.

Ceramic plate

• Before placing products in the unit, wait until it has reached the temperature set with the thermostat.
• Do not transfer food containers straight from an oven or a range to the ceramic plate, but first let the container’s surface temperature settle down. The ceramic plate endures the temperature of max. 100°C.

Correct storage of foodstuffs facilitates kitchen activities and affects energy consumption:

• Do not load products until the appliance has reached the correct operating temperature.
• Monitor the internal temperature of the unit daily.
• Always keep the products in good order.
• Do not store spoilt food in the unit.
• Do not drag containers over the unit’s stainless steel collar.

In normal conditions, the thermostat need not be adjusted.

After use

Cleaning

• In normal use, the appliance does not require any other daily care than sufficient cleaning.
• For cleaning the interior and exterior, use neutral or slightly alkaline cleaning agents or wipe the surfaces with a damp cloth. Abrasive materials should not be used.
• The use of a hose for cleaning the appliance is forbidden.

Maintenance or replacement of the top shelf light
If the lamp (Halotherm headlamp, LED strip or LED lamp) does not work, the service must be left to an authorized service workshop.

• The device must be disconnected from the mains before servicing the lamp.
• There is a separate user manual for the upper shelves.

Installation

Operating conditions
The appliance is designed for operation at temperatures of +10°C to + 25°C.

Transport and storage

• The appliance should be transported to the installation site in its transport package. Do not remove the package until near the installation place. The appliance should be transported in an upright position.
• The appliance is made of polished stainless steel and plastic, so it can become scratched very easily in site conditions. Therefore, the appliance should be delivered to the installation site at a later stage of construction work. It is forbidden to use the appliance as an installation base.
• The appliance should not be stored outdoors, not even in its transport package.

Unpacking the appliance
Remove foils protecting the stainless steel and plastic surfaces cautiously to prevent the surfaces from getting scratched.

Installation of Nova units

• If the unit is fitted with wheels, it must be installed on a level surface. When the unit is in its correct place, the wheels must be locked to point away from the centre of the unit. If the unit is fitted with legs, these can be adjusted so that the unit stands steadily on an uneven surface as well.
• If a serving line is composed of several units, they can be linked together from under the tray slides with the help of grey Nova connectors delivered with the unit.

Electrical connections
Connect the appliance to the power supply with an earthed socket. For making the connection, a socket is protected with a fuse of max. 16 A has to be provided for each unit.

Connections
The length of the connection cable in the Nova furniture is 3.2 m. It is good to plan a location for the extra length of the connection cable in the structure of the furniture.

Service door
As standard, the operating switches of Nova furniture are permanently placed on the units. The furniture has a service door, which makes it easier to use the operating switches.

Sewerage
The wastewater must be led to the drain through the drain valve in the Nova furniture. If there is no possibility of drainage, the water is removed through the service door. The Nova furniture has an outlet valve, which can be opened to drain the water in the basin. The unit has a standard 1 m discharge hose, which allows the water to be directed to the emptying container. The location of the emptying container is either behind the service door or, if there is not enough space for the emptying container inside the furniture, the emptying takes place outside the furniture in a container placed for emptying. If the furniture does not have drainage, it is extremely important to keep the drain valve tap closed at times other than emptying. This is especially true when the furniture is placed on a water-sensitive floor material, for example parquet.

Start-up

• After connecting the appliance to the power supply, turn on the main switch (green) and make sure that the pilot light of the switch lights up.
• Do not switch on the bain-marie if there is no water in the basin.
• In case you have problems with taking the appliance into use, contact the Metos service.

Troubleshooting

In case the appliance does not function as expected, review the following list of problems to find out if the appliance can be put in order without a service call. In all enquiries, please contact the nearest Metos service. Most problems can be managed on the phone.

properly in the socket.
Defective fuse.| Replace the fuse.
Heated BM: Water in the basin does not heat, even if the pilot light of the switch lights up.| There is or has not been enough water in the basin during heating.| Add hot water until the water level is at least 3 cm from the bottom.
Heated BM: Food does not keep hot enough.| Too much water in the basin.| Decrease water to the correct level.
The water basin is partly open.| Cover the basin with lids or containers.

The appliance does not contain parts that can be serviced by the user. Service must be carried out by an authorised service company.

Technical specifications

• Connection diagram S01120 A3, DI-BM 400-1600 230 V AC
• Connection diagram S01121 A3, DI-BM 400-1600 230 V AC Separate basins
• Connection diagram S01039 A, Water filling option

Connection diagram S01120 A3, DI-BM 400-1600 230 V AC

Connection diagram S01121 A3, DI-BM 400-1600 230 V AC Separate basins

Connection diagram S01039 A, Water filling option

Mått

| BM| 450| A 465
BM| 800| A 800
BM| 1200| A 1200
BM| 1600| A 1600
CPL| 450| A 465
CPL| 800| A 800
CPL| 1200| A 1200
 |  | B 650
C 1150
D 900 (normal), 750 (low)
E 1280 (normal), 1130 (low)
Item| Model| Type| Specification
---|---|---|---
Electrical connection|  |  | 230 V
Power input| BM| 450| 0,55 kW
Power input| BM| 800| 1,1 kW
Power input| BM| 1200| 1,65 kW
Power input| BM| 1600| 2,2 kW
Power input| CPL| 450| 0,26 kW
Power input| CPL| 800| 0,52 kW
Power input| CPL| 1200| 0,78 kW
Power input, LED strip| Nova| 450| 6 W
Power input, LED strip| Nova| 800| 13 W
Power input, LED strip| Nova| 1200| 19 W
Power input, LED strip| Nova| 1600| 28 W
Power input, LED light| Proff, Sky| 450| 8 W
Power input, LED light| Proff, Sky| 800| 18 W
Power input, LED light| Proff, Sky| 1200-1600| 28 W
Power input, Halotherm heat lamp| Nova, Proff, Sky| 450| 0,2 kW
Power input, Halotherm heat lamp| Nova, Proff, Sky| 800| 0,4 kW
Power input, Halotherm heat lamp| Nova, Proff, Sky| 1200| 0,6 kW
Power input, Halotherm heat lamp| Nova, Proff, Sky| 1600| 0,8 kW
Temperature range|  |  | 0…90°C
Temperature adjustment|  |  | Thermostat

• BM=BAIN-MARIE BM,
• CPL=CERAMIC PLATE CPL

The crossed-out wheeled bin means that within the European Union, the product must be taken to a separate collection at the product’s end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.

EC DECLARATION OF CONFORMITY

Metos Oy Ab

• Ahjonkaarre FI-04220 Kerava, Finland tel. +358 204 3913
• www.metos.com.

References

• metos.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>