memzuoix HD033 Wireless RGB Mousepad Instructions

memzuoix HD033 Wireless RGB Mousepad

Product Usage Instructions

• Turning On/Off and Changing Light Modes:

  • To turn on/off the mousepad, touch the button for three seconds.
  • Each touch will switch to the next light mode among the 12 available modes.

• Breath Light Mode
  

  • In this mode, the light belt displays 7 monochrome colors that fade in and out sequentially at varying speeds.

• Gradient Mode:
  

  • This mode features several different monochrome lights rotating around the mousepad in a running horse pattern, with unique colors and speeds for each gradient mode.

• Charging Indicator Light:
  

  • The charging indicator shows different colors: red for no charging, blue for charging, and green when fully charged.

• Wireless Charging Function:

  • The mousepad supports wireless charging with compatible devices.
  • Ensure proper alignment for efficient charging.

PRODUCT SPECIFICATION

Mouse pad light mode：

| Touch button: Touch three seconds to turn on/off.
Touch button: Each touch can switch to the next light mode, a total of 12 light modes.
Note:

1.  Breath light mode light belt by 7 monochromes in the form of fade in and out of the sequential change of color, different breath light modes fade in and out of the speed is different.

2.  The gradient mode light belt is rotated by several different monochromes in the form of running horse lights around the lamp belt, and the color and speed of different gradient modes are different.

Each color has a memory function (power off memory/power on memory/power off memory).
Wireless charging function：| Charging indicator light: no charging red light, charging blue light, full green light.
---|---

Matters needing attention：

| ****

1.  It is strictly prohibited to soak the product in water for cleaning, otherwise it will lead to short circuit failure of electronic components.

2.  Do not forcefully fold the lamp tube on the edge of the mouse pad, otherwise it will cause uneven light transmission.

3.  Do not strictly use the original or by the technical agreement of the power adapter, otherwise, it will make the product work abnormally.

4.  It is normal for high-power wireless charging devices to heat up, so there is no need to worry.

5.  If the device that supports wireless charging cannot be charged, please check whether the device supports Qi wireless charging.

6.  If you do not use the fast charging source adapter, the power input voltage is lower than 9V, the device will not work normally, and can only maintain the lighting effect.

FCC STATEMENTS

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note: T his equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

• Q: How do I know when the mousepad is fully charged wirelessly?
  • A: The indicator light will turn green when the mousepad is fully charged wirelessly.
• Q: Can I use any charging head with the mousepad?
  • A: It is recommended to use a 45W PD fast charging head for optimal performance.
• Q: How many light modes does the mousepad have?
  • A: The mousepad has a total of 12 light modes that can be cycled through by touching the button.
• Q: What is the operating temperature of the mousepad?
  • A: The recommended operating temperature for the mousepad is 45 degrees Celsius.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>