WOBANE 12V Wired Puck Light with Remote User Manual

May 15, 2024
WOBANE

WOBANE 12V Wired Puck Light with Remote

WOBANE-12V-Wired-Puck-Light-with-Remote-PRODUCT

Wired Puck Lights with Remote User Manual

WOBANE-12V-Wired-Puck-Light-with-Remote-FIG-1

Install

WOBANE-12V-Wired-Puck-Light-with-Remote-FIG-2

Touch Control :

  1. Short press the light lens to turn on/off the light or set the light color you want. The sequence is On White light Warm light Nature light Off.
  2. Long press the light lens for 2s to adjust the brightness (10%-100%).

Remote Control

WOBANE-12V-Wired-Puck-Light-with-Remote-FIG-5

  • The first time, be sure to pull out the bottom insulator.

Specifications

  • LED model: 2835
  • Voltage: 3.0-3.2V
  • Power supply :
  • USB charging/battery powered
  • Remote control power:
  • CR2025 button battery
  • The number of LED beads worked :
  • White light /6000K: 3pcs
  • Warm light/3000K: 3pcs
  • Nature light/4500K: 6pcs
  • Remote control distance: 4M/13FT

Product Features

  1. DC power supply puck lights, also can powered by 3*AA batteries.
  2. Touch/Remote control.
  3. Step-less dimming: Adjustable brightness (10%-100%) by long-pressing the remote(+/-) or pressing the light lens for 2s.
  4. Timer function: 15/30/60/120mins, controlled by the remote.
  5. 3 Lighting modes: White light, warm light, and natural light (6000K/3000K/4500K).
  6. Memory function: The light will remember the last brightness mode you used, and automatically select the same mode when next time you turn it on.
  7. Easy installation: A choice of screw or double-sided tape mounting.

Tips

  1. When using the remote, it’s better to use it within a 4m/13ft control distance and at a 45-degree.

  2. The remote control uses infrared sensor technology and due to the angle and distance of the control, one remote control cannot control the light effect of more than one light at the same time.

  3. When using stickers, stick them to clean, dry, dust-free, water and oil-free surfaces.
    The sticker cannot be reused, otherwise, the surfaces will be a residue that needs to be removed with alcohol.

  4. This lamp is for indoor use only, not waterproof.

  5. If the light is in a power-off state, the memory function will be clear and the brightness value will be 100% of the brightness.

Packing Including

  • 3* Lights
  • 1* Type-C USB Cable
  • 2* Connection Cables
  • 1* Remote control
  • 3* Adhesive tapes
  • 8* Screws
  • 1* Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals