CZBidet 0de88090 Intelligent Toilet Instruction Manual
- May 15, 2024
- CZBidet
Table of Contents
Intelligent toilet
Operation instruction
0de88090 Intelligent Toilet
- Thank you for choosing our product. please read the instruction carefully before installation.
- To ensure that timely service is available for you, please keep the manual for future reference.
Package Contain
Remote Controller
CONTROL PANEL FEATURES
- Stop
- Rear/move
- Front/move
- Dryer
- Clean
- Forward
- Flush
- Backward
- Clean
- Bubbles
- Flip seat
- FIip top cover
- Wind temperature
- Seat temperature
- Water temperature
PRODUCT INSTALLATION
Cons1ruction Points and Names of Departments
The picture is shown In Flgura 1. This picture shows the main components and
construction points in the oonstrudion.
-
Preparation before installation
User-supplied tools: adjustable wrench, woodwon<lng spirit level, Phillips saewdriver, glass glue gun, glass glue, raw material tape, tape measure, right angle ruler, electric dnll, drill bit Mali< the oenter line of the drain on the ground. and Install the water Inlet angle valve at a suitable position on the wan according to the size of the tale -
lnstallation steps
• Install the water inlet angle valve (see Figure 1)
• Construction and installation instructions (see Figura 2, Figura 3, and Figura 4)
1. Align the wal with the oenter1ine of the drain pipe (there are two options: 305mm and 400mm).
2. Draw the position of the oenter hole (select the Installation hole according to the actual needs).
3. Gently tum the toilet sideways, and press the side of the accessay seal ring with mud to the sewage drain at the bottom of the toilet.
4. Align the toilet drain outlet with the vertical position of the drain outlaid
Tips 1:
- The newly-renovated house is liable to damage the machine and affect human health due to residual debris such as mud and sand in the pipeline. Before installing, drain off the dirty water in the pipeline.
- Please choose a professional installer to install this product. Mer installation, please carefully check whether each part is installed correctly. After 48 hours, the glass glue is completely cured before use.
Tips 2:
After connecting the water pipe to open the angle valve, if there is water
flowing from the nozzle in the new product, please plug it in and It will
automatically reset the nozzle and stop the water. Be sure to tum off the
power and water before disassembling.
-
In the event of a power failure during the cleaning process, please do not move the spray boom.
After a call, the function returns to normal after a self-test -
Be sure to use the special water inlet angle valve and other acoessories provided by our company.
Caveat:
- Smart toilet accessories have been debugged before leaving the factory, and unauthorized disassembly is strictly prohibited. Please use the fittings and pipes provided by our company. Old fittings and pipes cannot be reused. If you have any questions, please contact your local dealer or our after-sales service department
- All contents in this instnJction manual are based on the latest situation of the product at the time or printing.Subject to change without notice.
CLEANING ANGLE VALVE
Tum off the angle valve switch, use a slotted screwdriver or coin tool to unscrew the back cover switch, remove the filter and clean
https://www.facebook.com/czbidet
Please scan the QR code above to view the installation
Facebook Link: https://www.facebook.com/czbidet video, or search the
following link to view the homepage.
If you encounter any after-sales problems, please contact us immediately, and
our customer service will reply within 24 hours to ensure you have worry-free
after-sales service.
Thank you tor choosing our smart toilet. Please read this manual carefully and
use it correctlyPlease keep this manual properly and read it carefully before
use.
*Note: this instruction manual contains after-sales service guide.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>