TransOurDream 1.0 Tru Transfer Paper Laser for Light Fabric Instruction Manual

Light Heat Transfer Paper-Laser 1.0

Preparation

Preparation Before Transfer: T-shirt, Laser 1.0 Transfer Paper, Teflon Paper(in the pack), Laser Printer, Scissors/Cutting Machine, lron/Easy Press/Professional Heat Press Machine.
NOTES: Please check if transfer paper has been bent or not clear before using it.
If there is any problem with transfer paper, kindly let us know.

No Mirror Print & cut

1. Complete below settings based on your printer brand. No mirror printing.
   Brand| Paper Type| Paper Thickness
   ---|---|---
   HP| Label| 100g-150g
   OKI
   Other Brands

2. Print the image on the BLANK side.
   NOTES: For Laser Printer ONLY.

3. After the image is dry, cut out your design with scissors or cutting machine, such as Cricut.

Transfer (Please refer to Step 3 for Iron/Easy Press/Heat Press Machine)

1. PEEL YOUR DESGIN from the backing LOGO paper.
   NOTES: Transfer Paper is composed of two layers – The backing logo paper and the blank film.

2. NOTES: Don’ t use ironing board as it is too soft.

3. REMOVE CREASES:
   Place your t-shirt on a solid and heat-resistant surface and smooth out creases with your ironing tool.

4. PLACE YOUR DESIGN:
   Place your image facing UPWARD onto t-shirt.

5. COVER WITH TEFLON PAPER.

6. IRON
   *Set to HIGH TEMPERATURE

• Turn OFF steam
  NOTES:
  INSUFFICIENT PRESSURE and IRONING TIME would achieve POOR transfer result, the transfers may peel off.
  (1) Apply FIRM, EVEN and HEAVY pressure on each area of the image for 5 seconds.
  (2) Repeat and circularly press and iron the whole image.

(3) Ensure that ALL areas of the image is ironed, especially the corners and edges. If the corner peels off, cover teflon paper and heat press it for another 15~20 seconds.
3. HEAT PRESS MACHINE
-Set Temperature to 170°C(338°F).
-Set Time to 10 seconds.
– Apply MEDIUM Pressure.
(3) EASY HEAT PRESS
NOTES:
The temperature and time may vary based on different kinds of easy heat press and the printed image size. Suggest you do a test before transfer onto t-shirts.
(1) Heat press the whole image slowly from one side to the other side.
(2) Apply HEAVY pressure on each half of the image for 10 seconds, circularly iron the whole image 4 times.

(3) Iron each corner for 15~20 seconds. If the corner peels off, cover teflon paper and heat press it for another 15~20 seconds.

4. After ironing done, remove teflon paper.
   Congratulations! Your DIY image transfer has been done. Enjoy!

WASHING INSTRUCTIONS:

• Don’t wash within 48 hours after transfer.
• Wash the garment before wearing.
• Don’t use bleach or alkaline detergent.
• Don’t soak to wash,
• Turn garment inside out when washing.
• Full spin cycle, cold water washing.
• No delicate washing.
• No tumble dry.
• Remove garment promptly after washing , colors may bleed if left wet too long.
• Unfold image, hang to dry naturally.

STORAGE TIPS:

1. Keep the image facing outside when fold the garment.
2. Store the garment in a dry and cool place.
3. Keep unused transfer paper sealed and preserved.

Website: www.transourdream.com
E-mail: customer-service@transourdream.com
For detailed video tutorial, please visit the following platforms:
SEARCH: Transourdream

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>