TransOurDream 2.0 LaserJet And Inkjet Light Transfer Paper Laser User Manual

TransOurDream 2.0 LaserJet And Inkjet Light Transfer Paper Laser User Manual

Preparation

T-shirt|
---|---
Scissors|
Iron or Heat Press|
LaserJet or Inkjet Printer|
Transfer Paper|

Preparation Before Transfer: T-shirt, Laser 2.0 Transfer Paper, Teflon Paper(in the pack), LaserJet or Inkjet Printer, Scissors/Cutting Machine, Iron/Easy Heat Press/Professional Heat Press Machine.

NOTES: Please check if transfer paper has been bent or not clear before using it. If there is any problem with transfer paper, kindly let us know.

No Mirror Print & Cut

For Inkjet

1. Printing Quality: High Quality
2. Paper Type: Plain Paper
3. Uncheck “Fit picture to frame”
4. No Mirror Printing

For LaserJet

1. Paper Type: Label
2. Paper Thickness: 100g-150g
3. No Mirror Printing

Complete above Settings before print.

**INKJET & LASERJET

**Print the image on the BLANK side.

NOTES

1. Compatible with all inkjet printers with pigment ink and dye ink.
2. Compatible with laser printer HP, OKI and more.

After the image is dry, cut out your design with scissors or cutting machine, such as Cricut.

3.Transfer (Please refer to Step 3 for Iron/Easy Heat Press/Heat Press Machine)

PEEL YOUR DESGIN from the backing LOGO paper

NOTES: Transfer Paper is composed of two layers- The backing logo paper and the blank film.

1. REMOVE CREASES:

   ---

2. Place your t-shirt on a solid and heat-resistant surface and smooth out creases with your ironing tool.

3. PLACE YOUR DESIGN:
   Place your image facing UPWARD onto t-shirt.

4. COVER WITH TEFLON PAPER.

IRON

NOTES:
Don’t use ironing board as it is too soft

NOTES:

INSUFFICIENT PRESSURE and ironing TIME would achieve poor transfer result- the transfers may peel off

1. Apply FIRM, EVEN and HEAVY pressure on each arsa of the image for 5 seconds.
2. Repeat and circularly press and iron the whole image
   Image Size| Ironing Time
   ---|---
   Full sheet| 3-5 minutes
   1/2 sheet| 1.5-2 minutes
   1/4 sheet| 40-60 seconds
3. Ensure that ALL areas of the image is ironed, especially the corners and edges. If the corner peels off, cover teflon paper and heat press it for another 15~20 seconds

NOTES: INSUFFICIENT PRESSURE and ironing TIME would achieve poor transfer result- the transfers may peel off.

**HEAT PRESS MACHINE

**

• -Set Temperature to 170°C(338°F).
• Set Time to 10 seconds.
• Apply MEDIUM Pressure

EASY HEAT PRESS

NOTES: The temperature and time may vary based on different kinds of easy heat press and the printed image size. Suggest you do a test before transfer onto t-shirts.

1. Heat press the whole image slowly from one side to the other side.
2. Apply HEAVY pressure on each half of the image for 10 seconds, circularly iron the whole image 4 times,
   Image Size| Temperature| Ironing Time
   ---|---|---
   Full sheet| 170°C(338°F)| 120-150 seconds
   1/2 sheet| 170°C(338°F)| 70-90 seconds
   1/4 sheet| 170°C(338°F)| 30-45 seconds
3. Iron each corner for 15~20 seconds. If the corner peels off, cover teflon paper and heat press it for another 15~20 seconds.

   ---

After ironing done, remove teflon paper. Congratulations! Your DIY image transfer has been done. Enjoy!

WASHING INSTRUCTIONS:

• Don’t wash within 48 hours after transfer.
• Wash the garment before wearing. Don’t use bleach or alkaline detergent.
• Don’t soak to wash.
• Turn garment inside out when washing. Full spin cycle, cold water washing.
• No delicate washing.
• No tumble dry.
• Remove garment promptly after washing, colors may bleed if left wet too long.
• Unfold image, hang to dry naturally.

STORAGE TIPS:

• Keep the image facing outside when fold the garment.
• Store the garment in a dry and cool place.
• Keep unused transfer paper sealed and preserved.

Website: www.transourdream.com
E-mail : [email protected]
For detailed video tutorial, please visit the following platforms:
SEARCH: Transourdream

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>