BOSCH SMV6HVX01I Built In Dishwasher User Guide

BOSCH SMV6HVX01I Built In Dishwasher

Specifications

• Water hardness settings: Soft (H00, H01), Medium (H02, H03), Hard (H04, H05, H06)
• Programmes: Various durations and energy consumption
• Rinse aid max level: 2
• Detergent dispenser capacity: 50 ml, 25 ml, 15 ml

Product Usage Instructions

Setting up Home Connect:

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Water Hardness Settings:
Follow the instructions in the manual to set the appropriate water hardness level based on your location.

Adding Special Salt:

1. Unscrew the lid of the special salt dispenser and remove it.
2. Fill the dispenser with water on initial start-up.
3. Add the special salt to the dispenser, ensuring no detergent is added.
4. Place the lid back on and close it securely.

Adding Rinse Aid:

1. Press to open the basic settings.
2. Add rinse aid up to the max mark in the dispenser.
3. Close the lid of the dispenser for rinse aid securely.

Adding Detergent:

1. Add the detergent to the dry dispenser based on the recommended quantity.
2. Close the lid of the detergent dispenser securely.

Using Your Appliance:

1. Load suitable tableware into the dishwasher after removing large food remnants.
2. Add detergent to the dispenser.
3. Switch on the appliance.
4. Select the appropriate programme.
5. Start the programme.
6. Remove the tableware at the end of the programme.
7. To cancel a programme, press for approximately 4 seconds.

Cleaning Filters:

1. Check filters for residue after each wash.
2. Turn and remove the coarse filter system.
3. Remove the micro filter for cleaning.

FAQ

• How often should I add rinse aid?
  Add rinse aid whenever the level is low, up to the max mark in the dispenser.

• Can I use regular salt instead of special salt?
  No, only use special salt designed for dishwashers to avoid damage to the appliance.

• What should I do if the water hardness level needs adjustment?
  Follow the manual instructions to reset and adjust the water hardness setting accordingly.

Setting up Home Connect

Tip:  Connect your appliance to a mobile device. You can con-veniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mo-bile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

• You can find an overview of the water hardness values that can be selected here.
• A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press ⁠ .
2. To open the basic settings, press Setup 3 sec for 3 seconds.
   • The display shows Hxx.
   • The display shows ⁠ .
3. Press  Start repeatedly until the right water hardness has been set.
4. To save the settings, press Setup 3 sec for 3 seconds.

Programmes

• The programme data has been measured in the laboratory according to European standard EN 60436.
• The consumption figures depend on the programme and additional function selected.
• The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

USING INSTRUCTION

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and lift 2⁠.

2. Add rinse aid up to the max mark.

3. Close the lid of the dispenser for rinse aid.
   The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.

2. Close the lid of the detergent dispenser.
   The lid clicks into position.

How to use your appliance

1. Load the tableware.
   Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.

2. Add detergent.

3. Switch on the appliance ⁠ .

4. Select the programme.

5. Start the programme ⁠START.

6. Remove the tableware at the end of the programme.

7. To cancel the programme, press Setup 4 sec for approx. 4 seconds.
   The programme is cancelled and ends after approx. 1 minute.

CLEAN AND MAINTENANCE

Cleaning filters

1. After each wash check the filters for residue.

2. Turn the coarse filter anticlockwise 1 and remove the filter system ⁠2.

3. Pull down the micro filter to remove.

4. Press the locking catches 1 together and lift the coarse filterout ⁠2.

5. Clean the filter elements under running water.

6. Re-assemble the filter system.

7. Insert the filter system into the appliance and turn the coarse filter clockwise.
   Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm and pull down to remove ⁠.

2. Pull up the lower spray arm to remove.

3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.

4. Insert the lower spray arm.
   The spray arm clicks into position.

5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.

2. Remove the filter system.

3. Scoop out any water.

4. Prise off the pump cover using a spoon and grip it by the crosspiece.

5. Lift the pump cover inwards at an angle and remove.

6. Remove any remnants of food and foreign bodies in the area of the impeller.

7. Insert the pump cover 1 and press down ⁠2.
   The pump cover clicks into position.

8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>