TAMMER 334665 Headlamp Instruction Manual
- May 15, 2024
- TAMMER
Table of Contents
Instruction Manual
334665 Headlamp
- Material: ABS
- Light source: XPE + 2x COB LED + red LED
- Battery: Built-in 3.7V lithium battery
- Switch: double switch: Illumination switch + sensor switch
- Charging method: 5V USB C
- Mode: XPE high light – XPE low light – 2x COB white light – XPE + 2x COB LED light – red light flash
- Induction lamp: XPE light on/off
A. COB Light Source B. Sensor Switch C. Red Flood Light D. Light Source Switch
E. COB Light Source F. Sensor Launch G. XPE LED H. Induction Lamp I. Charging
Indicator
Instructions:
- Press the switch, turn on the headlamp, adjust the required position
- Press the sensor switch, turn on the induction mode, you can wave to control the main light XPE light on or off
Charging Instructions:
USB charging interface on the back side of the headlight, open the
waterproof cover, plug in the USB cable to charge, there is an indicator light
on the right of the headlight when charging, the red light indicates charging,
when the charging is completed, the indicator light turns green, please unplug
the power supply.
References
Read User Manual Online (PDF format)
Loading......