GREENCREATIVE 98325 Tube LED Select Drive Driver Instruction Manual

GREEN CREATIVE 98325 Tube LED Select Drive Driver

Product Information

Specifications

• Model Numbers: 98325, 98326, 98327, 35671, 98328, 98329, 98330, 98331, 98332, 98333, 98334, 35675, 98335, 98336, 98306, 98307, 98308
• LED Lamp Models: 9.5T5HE/2F/xxx/EXT, 11T5HE/3F/xxx/EXT, 13.5T5HE/4F/xxx/EXT, 11.5T8/4F/xxx/EXT/R, 14T8/4F/xxx/EXT/R, 9.5T8/2F/xxx/EXT, 10.5T8/3F/xxx/EXT, 11.5T8/4F/xxx/EXT, 14T8/4F/xxx/EXT, 14.5T8U6/xxx/EXT, 15T8T5DRIVER/2CH/R, 15T8T5DRIVER/4CH/R, 15T8T5HEDRIVER/SD/2CH, 15T8T5HEDRIVER/SD/4CH

Product Usage Instructions

1. Read all WARNINGS before continuing this section.
2. Make sure POWER IS TURNED OFF at the source to the location where you are installing the product.
3. Remove the lens, cover, and fluorescent tubes. Cut away all wires connecting the ballast and remove the ballast if necessary.
4. Attach the LED driver to the fixture using existing ballast mounting holes and screws if present. If necessary, use self-tapping screws to create new holes and mount the LED driver.
5. Follow the wiring diagrams for the number of lamps.
6. For 0-10V dimming circuits, connect the incoming grey pink, and purple wires to the LED driver’s grey or pink and purple wires using wire connectors.

Specifications

Frequently Asked Questions (FAQ)

Q: What does xxx in the model numbers represent?

• A: The xxx in the model numbers indicates the Color Rendering Index (CRI) and color temperature of the product.

Q: How do I know which wiring diagram to follow?

• A: Refer to the specific wiring diagrams provided for each lamp model to correctly wire the LED driver.

Q: Can I use this product in damp locations?

• A: It is recommended to check the product specifications and suitability for damp environments before installation.

LED TUBE & DRIVER INSTALLATION GUIDE – WARNING

• WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaire electrical systems.
• Installation should be performed only by a qualified electrician under the National Electrical Code and relevant local codes.
• WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings.
• WARNING – To prevent wiring damage or abrasion, do not expose wiring to the edges of sheet metal or other sharp objects.
• WARNING – Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for the installation of an LED retrofit kit. Check for enclosed wiring and components.
• Check the Max. case temperature of the fluorescent lamp ballast before replacement. The temperature shall be below or equal to the maximum case temperature (194℉/90℃) of the external driver. The external driver shall be mounted at the same location as the ballast.
• Disconnect power at the source before installation, inspection, or removal. Do not simply switch off the fixture.
• This item is rated at 120-277V. Installer must determine whether line voltage 120-277V is available at the luminaire before installation.
• Not intended for use with emergency exit fixtures or emergency exit lights.
• GREEN CREATIVE T8/T5 EXT tubes and drivers are sold separately. This lamp is DC input. Do not operate LED tubes without a corresponding compatible driver (refer to the compatibility table below).
• Do not use it if the product is damaged.
• Suitable for use with shunted and nonshunted lamp holders.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• “This luminaire has been modified to operate GREEN CREATIVE T8/T5 EXT LED lamps” shall be marked on the retrofit luminaire where readily visible by the user during normal maintenance including re-lamping.
• Risk of fire or electric shock. Do not open or modify. No user-serviceable parts inside.
• Installers should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder terminals. Instead, installers should cut existing lamp holder leads away from the lamp holder and make new electrical connections to lamp holder lead wires by employing applicable connectors.

FCC

SUITABLE FOR DRY AND DAMP LOCATIONS ONLY

Complies with Part 15 of FCC. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received including interference that may cause undesired operation.

• SUITABLE FOR “TYPE IC” OR “TYPE NON-IC” LUMINAIRES.
• No external weight or mechanical force should be applied to the tube or components.
• THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING JURISDICTION.

The minimum lamp compartment dimensions are described below:

Where xxx means 824-965 which indicates CRI and color temperature

COMPATIBILITY TABLE

LED TUBE & SelectDrive Driver COMPATIBLE GUIDE

Product| LED Lamp model| Lamp & Driver lumen output| Product| LED Lamp model| Lamp & Driver lumen output
15T8T5HEDRIVER/SD/2CH 15T8T5HEDRIVER/SD/4CH| 15T8T5HEDRIVER/SD/2CH 15T8T5HEDRIVER/SD/4CH
Low| Mid| High| Low| Mid| High
98325| 9.5T8/2F/830/EXT| 900| 1,100| 1,350| 98309| 11T5HE/3F/830/EXT| 1,000| 1,200| 1,500
98326| 9.5T8/2F/835/EXT| 900| 1,100| 1,350| 98310| 11T5HE/3F/835/EXT| 1,000| 1,200| 1,500
98327| 9.5T8/2F/840/EXT| 900| 1,100| 1,350| 98311| 11T5HE/3F/840/EXT| 1,000| 1,200| 1,500
35671| 9.5T8/2F/850/EXT| 900| 1,100| 1,350| 98312| 13.5T5HE/4F/830/EXT| 1,250| 1,550| 1,850
98328| 10.5T8/3F/830/EXT| 950| 1,200| 1,450| 98313| 13.5T5HE/4F/835/EXT| 1,250| 1,550| 1,850
98329| 10.5T8/3F/835/EXT| 950| 1,200| 1,450| 98314| 13.5T5HE/4F/840/EXT| 1,250| 1,550| 1,850
98330| 10.5T8/3F/840/EXT| 950| 1,200| 1,450| 98337| 14.5T8U6/830/EXT| 1,300| 1,600| 2,000
98331| 11.5T8/4F/830/EXT| 1,100| 1,350| 1,650| 35461| 14.5T8U6/835/EXT| 1,300| 1,600| 2,000
98332| 11.5T8/4F/835/EXT| 1,100| 1,350| 1,650| 98338| 14.5T8U6/840/EXT| 1,300| 1,600| 2,000
98333| 11.5T8/4F/840/EXT| 1,100| 1,350| 1,650| 98339| 14.5T8U6/850/EXT| 1,300| 1,600| 2,000
98334| 11.5T8/4F/850/EXT| 1,100| 1,350| 1,650| 37121| 11.5T8/4F/830/EXT/R| 1,100| 1,350| 1,650
35675| 14T8/4F/835/EXT| 1,300| 1,600| 2,000| 37122| 11.5T8/4F/835/EXT/R| 1,100| 1,350| 1,650
98335| 14T8/4F/840/EXT| 1,300| 1,600| 2,000| 37123| 11.5T8/4F/840/EXT/R| 1,150| 1,400| 1,700
98336| 14T8/4F/850/EXT| 1,300| 1,600| 2,000| 37124| 11.5T8/4F/850/EXT/R| 1,150| 1,400| 1,700
98306| 9.5T5HE/2F/830/EXT| 950| 1,150| 1,400| 37125| 14T8/4F/835/EXT/R| 1,300| 1,600| 2,000
98307| 9.5T5HE/2F/835/EXT| 950| 1,150| 1,400| 37126| 14T8/4F/840/EXT/R| 1,400| 1,650| 2,050
98308| 9.5T5HE/2F/840/EXT| 950| 1,150| 1,400| 37127| 14T8/4F/850/EXT/R| 1,400| 1,650| 2,050

INSTALLATION INSTRUCTION

LED TUBE & DRIVER INSTALLATION GUIDE – INSTALLATION STEPS

1. Read all WARNINGS before continuing this section.
2. Make sure POWER IS TURNED OFF at the source to the location at which you are installing the product.
3. Remove the lens, cover, and fluorescent tubes. Cut away all wires connecting the ballast and remove the ballast if necessary. (fig. 1)
4. Attach the LED driver to the fixture using existing ballast mounting holes and screws if present. If necessary, use self-tapping screws to create new holes and mount the LED driver.
5. Follow the wiring diagrams for the number of lamps. (fig. 2-9)
6. For 0-10V dimming circuits, connect the incoming grey pink, and purple wires to the LED driver’s grey or pink and purple wires using wire nuts (not provided). If no 0-10V dimming circuit is present, cap off the grey pink, and purple wires.
7. Visibly affix the “Modification Sticker” to the fixture and reinstall the housing cover and lens if applicable.
8. Return power back to the source and installation is complete.

• www.greencreative.com
• info@greencreative.com
• Tel / Fax: (866) 774-5433
• GREENCREATIVELED  ClightingLED in GREEN-CREATIVE

Documents / Resources

| GREENCREATIVE 98325 Tube LED Select Drive Driver [pdf] Instruction Manual
98325 Tube LED Select Drive Driver, 98325, Tube LED Select Drive Driver, LED Select Drive Driver, Drive Driver, Driver
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>