REBBLERS KART Pro Gameseat Instruction Manual
- May 15, 2024
- REBBLERS
Table of Contents
REBBLERS KART Pro Gameseat
Specifications:
- Product Name: GAMESEAT KART
- Variants: PRO (excluding TV mount), PRO+ (including TV mount)
- Material: Chrome pipe, metal frame holders, stainless steel brackets
Product Usage Instructions
Assembly of Frame:
Insert the chrome pipe into the left or right side of the frame, slide the
metal frame holders over the pipe, and push the pipe through the entire frame.
Fix the bar using the supplied bolts.
Attaching Seat Beams:
Attach the beams for the seat. Note: mount the long side of the metal
bracket against the backrest, note left and right beam (seen from sitting
position). The left and right eye are asymmetrical on the beam.
Mounting Stainless Steel Brackets:
Mount the stainless steel brackets B in the metal chair brackets A and bolt
the brackets securely.
Installing Steering Wheel and Pedal Plate Support:
Mount the steering wheel support and pedal plate support on the stainless
steel brackets and bolt these securely.
Mounting Front Support:
Mount the front support on the stainless steel brackets and bolt these
securely.
Steering Wheel Adapter Plate:
Mount the steering wheel adapter plate (may look different from the image
provided).
FAQ:
- Q: Are additional tools required for assembly?
A: The product comes with all necessary bolts and parts for assembly. Additional tools may be required for setup.
Q: Can the seat be adjusted for different heights?
A: The seat is fixed but can be mounted at a comfortable height during assembly based on individual preference.
PARTS
Unpack all parts from the carton (the pack can consist of one, two, or three
cartons)
INSTALLATION
-
Insert the chrome pipe into the left or right side of the frame, slide the metal frame holders over the pipe and push the pipe through the entire frame. Fix the bar using the supplied bolts
-
Attach the beams for the seat. Note: mount the long side of the metal bracket against the backrest, and note left and right beams (seen from sitting position). The left and right eye are asymmetrical on the beam.
Note : mount the long side of the metal bracket against the backrest .
-
Mount the stainless steel brackets B in the in the metal chair brackets A and bolt the brackets.
-
Mount the steering wheel support and pedal plate support on the stainless steel brackets and bolt these.
-
Mount the front support on the stainless steel brackets and bolt these.
-
The cockpit is shaping itself !!
-
Mount the steering wheel adapter plate (can look different than shown on this image).
-
Mount the stainless steel brackets B by sliding these in the front support and bolt these. The tilt can be adjusted by unbolting these and bolt these.
-
If you ordered the PRO+ including TV support install these as shown on these two images
-
You racing cockpit is ready and can be adjusted into F1 or rally position
Have fun with your REBBLERS racing simulation cockpit!
www.rebblers.com
Thank you for buying REBBLERS!
If you need more information please visit the frequently asked questions
website https://rebblers.com/faq/ or our video manuals on
https://rebblers.com/manuals/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>