ANONA KP2001 Smart Keypad User Manual
- May 15, 2024
- ANONA
Table of Contents
ANONA KP2001 Smart Keypad
Product Information
Specifications:
- Model: Anona Keypad
- Range: 3 meters from smart lock
- Power Source: Batteries
- Connectivity: Bluetooth
- Manufacturer: Anona Security Technology Limited
Product Usage Instructions
Installing Batteries:
- Unscrew the back plate of the keypad.
- Install the batteries with the correct polarity.
- Restore the back plate to the keypad and tighten the screws.
Pairing Smart Keypad:
- Open the Anona app and go to the Device page.
- Make sure the smart lock is connected to your phone and tap on My password.
- Follow on-screen instructions to complete pairing and set your password.
- Note: Ensure your phone is connected to the Internet and Bluetooth is enabled. The indicator light on the keypad should be flashing white.
Installing Smart Keypad:
- Select suitable installation option for the plate within a 3-meter range of the smart lock.
- Option 1: Use adhesive on the back of the plate.
- Align the groove on the keypad with the top of the plate and slide down until you hear a clicking sound.
- Option 2 (Recommended): Use wall plugs and screws.
Cautions:
Please refer to the FCC Caution and guidelines provided in the user manual
before usage.
FAQ (Frequently Asked Questions):
-
Q: What should I do if my keypad is not pairing with the smart lock?
A: Make sure your phone is connected to the Internet, Bluetooth is enabled, and the indicator light on the keypad is flashing white. Follow the pairing instructions carefully. -
Q: How do I know if my keypad’s batteries are low?
A: The indicator light on the keypad will show a solid red light and you may hear a buzzer beeping twice when the batteries are low.
Please read this manual carefully before using the product and keep it in a safe place.
Package contents
Product Overview
Product usage
Installing batteries
- Unscrew the back plate.
- Install the batteries with the correct polarity.
- Restore the back plate to the keypad and tighten the screws.
Pairing smart keypad
- Open the Anona app, go to the “Device” page, and find the Anona smart lock that is to be paired.
- Make sure that the smart lock is connected with your phone, and then tap “My password”.
- Follow the on-screen instructions to complete the pairing and set your password.
Note: Before binding, ensure your phone is connected to the Internet and the Bluetooth is enabled. Also ensure the smart keypad is in pairing mode with indicator light flashing white.
Installing smart keypad
-
Select the suitable option to install the plate.
Note: The smart keypad should be installed within a 3 meter range of the smart lock.
-
Align the groove on the keypad with the top of the plate and slide down until you hear a click sound.
Cautions
- Temperature for normal use of this product is-10°C to 55°C and the temperature for storage of this product is -30°C to 70°C. Do not use or store this product in the environment at too high or too low temperature.
- Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Specifications
- Product: Smart Keypad
- Model: KP2001
- Item dimensions: 62.5mm × 62.5mm × 32mm
- Input: 3 × AA battery
- Wireless connectivity: Bluetooth® 5.2
FCC Caution
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC ID: 2BB7K-KP2001
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
IC: 30992-KP2001
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Anona Security Technology Limited is under license. Other trademarks and trade names are those of their respective owners.
V1.0-20230822
Service: help@anonasecurity.com
For further information, please go to
www.anonasecurity.com
Manufacturer: Anona Security Technology Limited Address: 8 The Green, Ste
A Dover DE 19901, America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>