ADLER EUROPE AD 9617 Lint Collector User Manual

ADLER EUROPE AD 9617 Lint Collector

Product Information

• Model: AD9617
• Description: Portable fabric shaver
• Features:
  • Battery level indicator
  • Battery charging indicator
  • Working speed indicator
  • Button for changing the working speed / ON OFF power
  • USB type-C charging port
  • Blades
  • Blade cover
  • Rotary shaft
  • Housing
  • Bin for knots and pilling
  • cleaning brush
• Technical Data:
  • Power: 5W
  • Power supply: USB 5V/1A

Product Usage Instructions

1. Switch off the device by pressing the button (4).
2. Unscrew the blade protection cover (6) counter clockwise.
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
4. Clean the blade cover (6), the blades (7), and the rotating shaft (8) with the included brush (11).
5. Empty the knots and lint container (9).
6. After cleaning, reassemble all the disassembled parts.

Note:
The device has a protective lock. It will not function unless the blade cover (6) is refitted.

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

1. Before using the device, read the user manual and follow the instructions contained therein. The manufacturer is not liable for damage caused by using the device contrary to its intended use or improper operation.
2. The device is for home use only. Do not use it for other purposes that are inconsistent with its intended use.
3. Only connect the device to a 5V/1A USB port
4. Be especially careful when using the device when children are around. Do not allow children to play with the device and do not allow children or people unfamiliar with the device to use it.
5. WARNING: This equipment can be used by children over 8 years of age and persons with reduced physical, sensory, or mental abilities, or persons without experience or knowledge of the equipment, if it is carried out under the supervision of a person responsible for their safety or they have been given instructions on the safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and user maintenance should not be performed by children unless they are over 8 years of age and are supervised.
6. The device should not be used by children or people with limited physical, sensory, or mental abilities without the supervision of authorized or experienced persons and always in accordance with these instructions.
7. Do not immerse the cord, plug, or entire appliance in water or any other liquid. Do not expose the device to weather conditions (rain, sun, etc.) or use it in high humidity conditions (bathrooms, damp mobile homes).
8. Do not use the device if it has been dropped or damaged in any way, or if it is not working properly. Do not repair the device yourself. Return the damaged device to the appropriate service centre for inspection or repair. Any repairs may only be made by authorized service points. Improperly performed repairs may result in serious danger to the user.
9. Do not use the device near flammable materials.
10. Do not leave the device switched on unattended.

DETAILED SAFETY CONDITIONS

1. ATTENTION! The blades are very sharp!
2. Be careful when opening the tank so as not to damage it.
3. Do not bend or deform the perforated blade guard.
4. Use extreme care when removing the blades.
5. Wipe the body of the device with a dry cloth.
6. Empty the fluff container when it is 3/4 full.
7. Flatten the fabric surface before using the device.
8. Do not press the device into the fabric as this may damage the fabric.
9. Do not use the device on clothes you are wearing, always take them off. This may cause personal injury or damage to the lint remover.
10. The device has a protective lock. It will not function unless the blade cover is refitted.
11. Take care not to use the device on buttons, zips, appliqués, patches, stickers, labels, rips, seams, and seams.
12. Do not use the device on silk, wool, or linen garments. This can damage fabrics and damage the shaver blades.
13. Do not use the device near water, e.g. in the shower, bathtub, or over a wash basin with water.
14. Do not allow the device to get wet. Before using the appliance again, it must be checked by a qualified electrician.
15. Do not handle the device with wet hands.
16. The device should be turned off each time it is put away.

Device description

1. Battery level indicator
2. Battery charging indicator
3. Working speed indicator
4. Button for changing the working speed/ON OFF power
5. USB type C charging port
6. Blade Cover
7. Blades
8. Rotary shaft
9. Bin for knots and pilling
10. Housing
11. Cleaning brush
12. USB charging cable

BATTERY CHARGING

• To start charging, plug the charging cable (12) into the charging socket (5) and then connect it to the power supply.
• When connected to power, the battery charge indicator (2) will illuminate and the battery charge indicator (1) will display the current battery charge.
• When the battery is fully charged, the battery level indicator will show 100%. The time to fully charge the battery is 2-3 hours. When fully charged, the run time is approximately 120 minutes, depending on the selected speed.
• The device should not be used while charging.

USING THE DEVICE

1. Place the garment (fabric) on a flat surface, and smooth out the wrinkles.
2. Switch on the device by pressing the button (4), the device has three speeds. To increase the speed, press button (4) again. Available speeds: 6500, 7500, 8500 rpm
3. Move the device back and forth across the material.
4. Stubborn knots can be removed by moving the device across and then along (“checkered”) on one small piece of clothing.
5. Thin garments can be defrosted by placing them on flat, rigid cardboard.
6. For fabrics with a pattern, move the device in the direction of the pattern.

CLEANING

1. Switch off the device by pressing the button (4).
2. Unscrew the blade protection cover (6) counter clockwise.
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
4. Clean the blade cover (6), the blades (7), and the rotating shaft (8) with the included brush (11).
5. Empty the knots and lint container (9).
6. After cleaning, reassemble all the disassembled parts.

The device has a protective lock. It will not function unless the blade cover (6) is refitted.

TECHNICAL DATA

• Power: 5W
• Power supply: USB 5V/1A

Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.

Other Available Product

AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>