Homedics Shiatsu AntiGravity Recliner Manual AG-3000, AG-3001

June 8, 2024
Homedics

Shiatsu Anti Gravity Recliner

LUXU RY REC L IN ER WI TH
MOV ING MA S SAGE MECHANI SM

TWO YEAR LIMITED WARRANTY
(Valid in USA only)
HoMedics, Inc., guarantees this product free from defects in material and
workmanship for a period of two years from the date of original purchase,
except as noted below.
This HoMedics product warranty does not cover damage caused by
misuse or abuse; accident; the attachment of any unauthorized
accessory; alteration to the product; or any other conditions whatsoever
that are beyond the control of HoMedics. This warranty is effective only if
the product is purchased and operated in the USA. A product that requires
modification or adaptation to enable it to operate in any country other than
the country for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these modifications is not
covered under warranty. HoMedics shall not be responsible for any type of
incidental, consequential or special damages. All implied warranties,
including but not limited to those implied warranties of fitness and
merchantability, are limited in the total duration of two years from the
original purchase date.
To obtain warranty service on your HoMedics product, mail the unit and
your dated sales receipt (as proof of purchase), postpaid, along with
check or money order payable to HoMedics, Inc. to cover handling.
Back Cushion/Frame warranty service is $20.00. Please refer to the section
entitled “Back Cushion/Frame Removal for Warranty Service” on page 10
for instructions in removing the back cushion/frame for warranty service.
Upon receipt, HoMedics will repair or replace, as appropriate, your product
and return it to you, postpaid. If it is appropriate to replace your product,
HoMedics will replace the product with the same product or a comparable
product at HoMedics’ option. Warranty is solely through HoMedics Service
Center. Service of this product by anyone other than HoMedics Service
Center voids warranty.
This warranty provides you with specific legal rights. You may have
additional rights which may vary from state to state. Because of individual
state regulations, some of the above limitations and exclusions may not
apply to you.
For more information regarding our product line in the USA, please visit:
www.homedics.com.

Mail To:
HoMedics Service Center Dept. 168 3000 Pontiac Trail
Commerce Township, MI 48390
Email: cservice@homedics.com

IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING DANGER- TO REDUCE THE RISK OF ELECTROCUTION:

  • ALWAYS unplug the appliance from the electrical outlet immediately after using and
    before cleaning.

  • DO NOT reach for an appliance that has fallen into water. Unplug it immediately.

  • DO NOT use while bathing or showering.

WARNING – TO REDUCE THE RISK OF BURNS,
ELECTROCUTION, FIRE OR INJURY TO PERSONS:

  • An appliance should NEVER be left unattended when plugged in. Unplug from outlet
    when not in use and before putting on or taking off parts or attachments.

  • Close supervision is necessary when this appliance is used by, on or near children,
    invalids or disabled persons.

  • Use this appliance only for its intended use as described in this manual. DO NOT use
    attachments not recommended by HoMedics; specifically any attachments not
    provided with the unit.

  • NEVER operate this appliance if it has a damaged cord or plug, if it is not working
    properly, if it has been dropped or damaged, or dropped into water. Return it to
    HoMedics Service Center for examination and repair.

  • NEVER use pins or other metallic fasteners with this appliance.

  • Keep cord away from heated surfaces.

  • NEVER use while sleeping or fall asleep while using the massager.

  • NEVER drop or insert any object into any opening.

  • DO NOT operate where aerosol (spray) products are being used or where oxygen is
    being administered.

  • DO NOT carry this appliance by supply cord or use cord as handle.

  • To disconnect, turn all controls to the “O F F” position, then remove
    plug from outlet.

  • This appliance is designed for household use only.

  • This appliance is designed for personal, non-professional use only.
    This appliance should be used only for personal, non-professional
    uses.

SAVE THESE INSTRUCTIONS
C a u t i on—Please read all instructions carefully
before operating.

  • If you have any concerns regarding your health consult your
    doctor before using this product.

  • Individuals with pacemakers should consult a doctor before use.

  • NEVER leave the appliance unattended, especially if children are
    present.

  • NEVER cover the appliance when it is in operation.

  • DO NOT use this product for more than 15 minutes at a time.

  • Extensive use could lead to the products excessive heating and
    shorter life. Should this occur, discontinue use and allow the unit
    to cool before operating.

  • NEVER use this product directly on swollen or inflamed areas or
    skin eruptions.

  • This product is a non-professional appliance designed to provide
    soothing massage to worn muscles. DO NOT use this product as
    a substitute for medical attention.

  • DO NOT use this product before bed. The massage has a
    stimulating effect and can delay sleep.

  • This product should NEVER be used by any individual suffering
    from any physical ailment that would limit the user’s capacity to
    operate the controls.

  • This product should never be used by any individual suffering
    from any ailments that would limit or altogether inhibit the user’s
    capacity to feel or have any sensation in the body part that the
    product is being used on.

  • This unit should not be used by children or invalids without adult
    supervision

C a u t i on:

All servicing of this massager must be performed
by authorized HoMedics service personnel only

Components
Carefully remove all contents from packaging and inspect the product
to make sure all components of the chair have been received. These should include:

  • Left armrest A
  • Right armrest with control panel B
  • Front cross bar C
  • Bottom cross bar D
  • Back frame with attached cushion and massage mechanism E
  • Seat frame with attached cushion F
  • Large bolts and bolt sleeves for crossbars (8) G
  • Small bolts for back and seat frames (8) H
  • Small Allen wrenches I
  • Optional softening pad J
  • Detachable headrest K
  • AC adaptor L
    See Figure 1.

Easy to Follow Guide to Chair Assembly

  1. Assemble Chair Base
  • Attach the front cross bar C to left armrest A by lining up the labeled “1” on the cross bar with the “1” on
    the left armrest. Secure with the provided large bolts and bolt sleeves G using the allen wrench I . Attach the
    bottom cross bar D to the left armrest ensuring the labeled “3” on the crossbar lines up with the “3” on the
    armrest. Secure with the provided large bolts and bolt sleeves using the allen wrench.
    DO NOT FULLY TIGHTEN BOLTS AT THIS POINT. See Figure 2.

  • Attach right armrest B to cross bars C D making sure to line up the labeled “2” and “4” on the cross bars
    with the “2” and “4” on the armrest. Secure with large bolts and bolt sleeves using the allen wrench.
    See Figure 3.

  • Tighten all bolts, ensuring the base sits level without wobbling.

NOTE: ASSEMBLE BASE ON ITS SIDE.

2. Attach Seat Cushion/Frame to Base

  • Align the holes on the bottom of the seat frame F with the holes in the base frame. Use small bolts H to
    secure the seat frame to the base frame. Bolts must be inserted from the underside of the chair. See Figure 4.

  • Tighten all bolts evenly using the allen wrench.

NOTE: IT MAY BE EASIER TO TURN THE BASE ON ITS SIDE TO INSERT THE BO LTS.

3. Attach Back Cushion/Frame to Base

  • Align the holes at the bottom of the back frame E with the holes in the lower bracket in the base frame. Use
    small bolts to secure the back frame to the base frame. See Figure 5. Attached correctly, the back frame will form
    a concave shape and fabric stitching should face up. See Figure 6.

  • Tighten all bolts evenly using the allen wrench provided.

Homedics Shiatsu AntiGravity Recliner Manual AG-3000,
AG-3001

4. Connect Power Source

  • Locate the output jack behind the AntiGravity chair in the lower right corner of the back cushion. The input jack
    will also be found behind the AntiGravity chair on the right side of the seat cushion. See Figure 7. Firmly insert
    the output jack into the input jack to connect the massage mechanism with the control panel.

  • To attach the softening pad J align the loop strip located on the softening pad strap to the hook strip on
    the back of the chair cushion to secure into place. See Figure 8.

  • To attach the headrest K to the back cushion, align the loop strip on the strap of the headrest with the
    hook strip on the softening pad or back of the chair cushion to secure in place. See Figure 9.

  • Ensure the AC power adaptor cord and extends through the back of the frame. Be sure the AC adaptor
    cord is not twisted or crimped between the mat and the metal frame.

Instructions for Shiatsu AntiGravity Recliner Use
Your Shiatsu AntiGravity recliner is designed to provide relaxation in a variety of positions utilizing the easylock
levers on each side of the armrests. The ideal position for optimum relaxation is one in which the feet are
above the heart. This position will reduce pressure on the spine and help relieve muscle tension.
NOT E: The Shiatsu AntiGravity recliner design has a weight limit of 300 pounds. Persons exceeding this
body weight should not use this recliner.

  • Before sitting in the Shiatsu AntiGravity recliner, be sure it is in the complete upright position by pushing the
    levers forward toward the footrest.

  • Sit in the chair and lean back slowly. Sitting all the way back in the seat will make it easier to recline. To
    adjust the angle of the chair, hold on to the armrests and lean back or forward until you reach the desired
    position. Lock the position into place by pulling the levers back.

  • The AnitGravity recliner’s ergonomic design ensures proper spine alignment in any of its reclining positions.

  • The footrest may be raised by pulling it upward. Each position will sound with a click. To lower the footrest,
    raise it until it stops and then push it back towards the floor.

  • Before getting out of the AntiGravity recliner, be sure to return it to its full upright position and lock into place
    by pulling the easy-lock levers back.

  • Stand up using the armrests for support.

Tip: To help you recline, unlock the levers and slowly raise your hands above your head and lean back. Lock
in your desired position by pulling the levers back. To sit upright, unlock the levers and move hands slowly
towards your knees while leaning slightly forward. This will bring the recliner back to its full upright position.

Power Adaptor Instructions
Connect the adaptor jack to the massage chair power receptacle located along the right side of
the chair. Once inserted, plug the other end into an AC power outlet. Use only the AC power
adaptor provided with this unit.

AC Power Adaptor Information
Your massage chair is powered by an attached custom AC home adaptor. Use only the supplied
AC home adaptor as other similar-looking adaptors may cause irreparable damage to the unit
and will void your warranty.

Massage Chair and Control Panel Instructions
Press the POWER button once to activate the control panel. The LED indicator will illuminate.
To deactivate, press again. For complete instructions, please see pages 8-9.
NOTE: The intensity of the massage will change with the angle of the chair back. Generally,
the more the chair is reclined, the more intense the massage will be. You can adjust the
chair angle to suit your personal comfort level. You may also soften the massage force by
placing a towel between yourself and the unit.
Caution: Do not jam or force any part of your body in the moving massage mechanis m.

Automatic Shut Off
The Shiatsu AntiGravity recliner has been designed for convenience and safety. As a special
precaution against falling asleep while using the unit, or leaving the unit on while it is still in
operation, we’ve programmed it to automatically stop working after 15 minutes. This special
feature should not be considered as a substitute for OFF. Always remember to turn your unit off
when not in use.

Shiatsu AntiGravity Recliner™
LU XURY RECL INE R WI TH
MOV ING MA S SAG E MECHAN ISM

Maintenance
To Store: Avoid contact with sharp edges or pointed objects which might
damage/puncture the fabric.
To Clean: Disconnect massage cushion from power source before cleaning.
The massage cushion and control panel may be cleaned with a soft, damp
cloth only.

  • The massage cushion is not machine washable and must not come into
    contact with water or any other liquids.

  • Do not immerse into liquids to clean.

  • Never use abrasive cleaners, brushes, gasoline, kerosene, polish or paint
    thinner to clean.

  • Do not attempt to repair your AntiGravity recliner. There are no user serviceable
    parts. For service, send the unit to the HoMedics service address listed in the
    warranty section.

Frame: Periodically, the frame should be checked to ensure the screws are tight.
If the frame is found to be loose, tighten screws with the tools provided.
The AntiGravity recliner and massage cushion are designed for indoor
applications only. Use of this product for outdoor applications may cause
irreparable damage and void your warranty.

Back Cushion/Frame Removal
for Warranty Service

If you experience a problem with the massage mechanism located in the back
frame/cushion of the Shiatsu AntiGravity Recliner within a two year period, send
this component to the HoMedics Service Center for repair as noted in the
warranty on page 12.
To disassemble the back cushion/frame, first disconnect the power source
located behind the chair at the back cushion base and seat cushion. See figure
7 on page 6 for an illustration. Now completely unscrew the bolts located along
the base of the back cushion to detach from the chair. See figure 5 on page 5.
Once removed, please see the warranty on page 12 for further instruction.

Do not use the chair or connect it to a power source
while disassembled.

Shiatsu AntiGravityRecliner
LUXU RY R EC L INE R WI TH
MOV ING MA SS AGE MECH ANI SM

NOTE: Color of fabric and chair components may differ from colors shown above.

Read More About This Manual & Download PDF:

Homedics Shiatsu AntiGravity Recliner Manual AG-3000, AG-3001 – Optimized PDF
Homedics Shiatsu AntiGravity Recliner Manual AG-3000, AG-3001 – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Homedics User Manuals

Related Manuals