DeerTalk SFL4 Smart RGBICW Flood Light User Manual
- May 15, 2024
- DeerTalk
Table of Contents
DeerTalk SFL4 Smart RGBICW Flood Light
Overview
Dimensions
Installation
4 packs one set
Inground installation Wall mounted installation
- LAMP BODY KIT
-
Lamp body 4pcs
-
M5*10 Screw 4pcs
-
Grounding 4pcs
-
L-shaped hexagonal hand wrench 1pcs
- LAMP BODY KIT
-
Lamp body 4pcs
-
M5*25 Self-tapping screws
-
8pcs
-
L-shaped hexagonal hand wrench 1pcs
WiFi Connected & APP Settings
- Download “Tuya Smart” or “Smart Life” APP from Google play or App Store, or scan the QR code below
|
---|---
Tuya Smart APP
|
---|---
Smart Life APP
-
1.2 Register and login
-
1.3 Ensure that the phone is connected to 2.4GHz Wi-Fi network, and enable 4GHz mobile data, Bluetooth and GPS. When the device needs to connect to the app, long press the control button for 5 seconds. When the red light flashes, the user can open the app to access the network. If the device fails to access the network for 3 minutes, the device automatically enters the steady-on mode. If the device needs to access the network again, long press the control button for 5 seconds.When red light flashes, the network can be configured.
-
1.4 Automatically search for devices (recommended first). The APP home page interface will automatically pop up (Find the devices to be added).Click Add or click + icon on the upper right corner of the APP home page, to choose Add Device and enter the Add interface for selecting the device to be added.
-
1.5 Select a network and click Next.
-
1.6 The device is now in the linking state. It means added successfully when appear “√” and the red light stops flashing.
-
1.7 Manually add a device. The device must be in the connected state. Click Add in the upper right corner of the home page to select Add Device. On the Add Device page, choose Lighting-Light Source (BLE+Wi-Fi).
-
1.8 Continue to configure the network and confirm that the light flashes quickly or breathes.
-
1.9 Select the blinking or breathing rapidly according to the blinking status of the light.
-
1.10 Select 2.4 GHz Wi-Fi network and enter the password, and then click Next.
-
1.11 Continue to select Add
-
1.12 The indicator stops flashing when the device is added successfully. APP supports 2.4GHz Wi-Fi network/4G data network/ Bluetooth wireless control. When using Bluetooth control, the router needs to be disconnected for about 3 minutes to connect.
-
1.13 Select the number of lamp head based on the need and actual situation.
-
1.14 Colors interface.
-
1.15 The color of each lamp head can be customized.
-
1.16 Turns off single lamp head.
-
1.17 Cold and warm light interface.
-
1.18 Scene mode.
-
1.19 Music mode
-
1.20 Timing Mode
-
1.21 Check the third-party voice devices supported by the device by clicking the writing icon in the upper right corner.
-
1.22 The device supports Alexa and Google Assistant.
-
1.23 APP supports Share Device and Create Group functions
-
1.25 The app supports the following three methods to remove devices on the network:
Method 1: On the home page, long press the device to enter the Remove Device page, click the the underneath to remove the device.
-
1.26 Method 2 : Enter the interface of control device, click the writing icon, and click the underneath to remove.
-
1.27 Method 3: Batch removal: Click “… “under the + icon on the right side, select Device Management to enter the Device Management page to remove the devices in batches.
-
1.28 Click the writing icon on the control interface , and then click writing icon after the device name for renaming.
Notice
- The product is only suitable for outdoor use , avoid long time work in humid environment;
- Do not soak the product in water or other liquids;
- When installing , the screw need to be locked firmly and not loose;
- Do not install the product in a high temperature environment;
- The adapter needs to be connected in place, and there must be no looseness or poor contact;
- Do not disassemble and install the lamp
Model: SFL4
service@deertalklight.com
