Midea JHCF515 510L Chest Freezer User Manual

: June 5, 2024
: Midea

Midea JHCF515 510L Chest Freezer User Manual

DEAR CUSTOMER:
Thank you for buying this freezer. To ensure that you get the best results from your new freezer, please take time to read through the simple instructions in this booklet.Please ensure that the packing material is disposed of in accordance with the current environmental requirements.
When disposing of any freezer equipment please contact your local waste disposal department for advice on safe disposal.This appliance must be only used for its intended purpose.

Safety warnings

Warning

Warning: risk of fire / flammable materials

RECOMMENDATIONS:

This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

WARNING: Please abandon the appliance according to local regulators for it use flammable blowing gas and refrigerant.

WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

Do not use extension cords or ungrounded ( two prong ) adapters.

DANGER: Risk of child entrapment.Before you throw away the appliance:

Take off the doors.
Leave the shelves in place so that children may not easily climb inside.

The appliance must be disconnected from the source of electrical supply before attempting the installation of accessory.

Refrigerant and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.

For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

For IEC standard: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.)

Children should be supervised to ensure that they do not play with the appliance.

Meaning of safety warning symbols

Prohibition symbols
The symbols indicate prohibited matters, and those behaviors are forbidden. Non-compliance with the instructions may result in product damages or endanger the personal safety of users.

Warning symbols
The symbols indicate matters that must be followed, and those behaviors must be strictly executed in line with the operation requirements. Non-compliance with the instructions may result in product damages or endanger the personal safety of users.

Note symbols
The symbols indicate matters to pay attention to, and these behaviors shall be specially noted. Due precautions are needed or minor or moderate injuries or damages of the product will be caused.

This manual contains lots of important safety information which shall be observed by the users.

Do not pull the power cord when pulling the power plug of the freezer. Please firmly grasp the plug and pull out it from the socket directly.
Do not damage the power cord under any condition so as to ensure safety use, do not use when the power cord is damaged or the plug is worn.
Worn or damaged power cord shall be replaced in manufacturer-authorized maintenance stations.
The power plug should be firmly contacted with the socket or else fires might be caused. Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
Please turn off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the freezer and other electrical appliances considering that spark may cause a fire.
To ensure safety, it is not recommended that to place regulators, rice cookers, microwave ovens and other appliances on the top of the freezer, those recommended by the manufacturer are not included. Do not use electrical appliances in the food pan.

Do not arbitrarily disassemble or reconstruct the freezer, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist.
Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.
The gaps between freezer doors and between doors and freezer body are small, be noted not to put your hand in these areas to prevent from squeezing the finger. Please be gentle when open the freezer door to avoid falling articles.
Do not pick foods or containers with wet hands in the freezing chamber when the freezer is running, especially metal containers in order to avoid frostbite.
Do not allow children to enter or climb the freezer to prevent that children are sealed in the freezer or children are injured by the falling freezer.
Do not spray or wash the freezer; do not put the freezer in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the freezer.
Do not place heavy objects on the top of the freezer considering that objects may fall when open the door, and accidental injuries might be caused.
Please pull out the plug in case of power failure or cleaning. Do not connect the freezer to power supply within five minutes to prevent damages to the compressor due to successive starts.

Do not put flammable, explosive, volatile and highly corrosive items in the freezer to prevent damages to the product or fire accidents.
Do not place flammable items near the freezer to avoid fires.
This product is household freezer and shall be only suitable for the storage of foods. According to national standards, household freezer shall not be used for other purposes, such as storage of blood, drugs or biological products.
Do not place items such as bottled or sealed container of fluid such as bottled beers and beverages in the freezer to prevent bursts and other losses.

Warnings for energy

Freezer might not operate consistently when sited for an extended period of time below the cold end of the range of temperatures for which the freezer appliance is designed.
The fact that effervescent drinks should not be stored in food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold;
The need to not exceed the storage time recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets;
The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children and not in the vicinity of the freezer appliance, in order to prevent children from being locked inside.

The freezer’s refrigerant and cydopentane foam materials are combustible materials and discarded freezers should be isolated from fire sources and can not be burned. Please transfer the freezer to qualified professional recycling companies for processing to avoid damages to the environment or other hazards.

Please remove the door of the freezer and shelves which shall be properly placed to avoid accidents of children entering and playing in the freezer.

Correct Disposal of this product:
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.They can take this product for environmental safe recycling.

Proper use of freezers

Name of components

Proper use of freezers

( The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor )

The low temperature of freezer may keep food fresh for a long time and it is mainly used to store frozen foods and making ice.
The freezer is suitable for storage of meat, fish, shrimp, dumplings, rice balls and other foods not to be consumed in short term.
Chunks of meat are preferably to be divided into small pieces for easy access.
Please be noted food shall be consumed within the shelf time.

Temperature Control

Proper use of freezers

( The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor )

Operation Key and lamp A.Lock/Unlock Key B.Fast freeze key C.Temperature-rise key D.Temperature-drop key E .High temperature alarm lamp (the high temperature alarm will ring, the red indicator light will be on with buzzing when the temperature of sensor is detected over -8°C last for more than 36H. Press key to cancel alarm. After the display screen is off, the red light is still on. When the temperature is back to -8°C, the red light will be off and the high temperature alarm exit.) F .Fast freeze display lamp (the lamp will be on when you press the Fast freeze key and the lamp will be off when the fast freeze mode exit)
Display area Display setting temperature
Display control
- When power-on the chest freezer,the display panel light fully last for 3s,with the buzzing for 3 times. then the panel enter in normal running state.
- Digital display area: Display a fault code when a failure occurs; display the setting temperature or setting mode when no failure occurs;
- Display control (normal operation mode and commodity inspection mode) In lock state, the display screen will go out when there is no key operation for 30s: In operating a key, display screen wakes up to normal display; when a failure in the category of “visible fault code”, display screen wakes up and then goes out after 30s.
Lock/ Unlock
- Hold lock/unlock Key A under the unlock state for 3s, the control panel will enter the lock state.
- Hold lock/unlock Key A under the lock state for 3s, the control panel is unlocked. Note: All the following functions must be operated under the unlock state.
Conversion between Fahrenheit and Centigrade
- Press Fast Freezing key B and Temperature-rise key C while the display is in centigrade temperature,the display will switch to Fahrenheit degree show;
- Press Fast Freezing key B and Temperature-rise key C while the display is in Fahrenheit degree, the display will switch to Centigrade degree show.
Temperature Setting
- Centigrade temperature
1. Press Temperature-rise key C once when the display is in centigrade temperature, the temperature will go up for 1°C; After locking, the chest freezer will run upon the set value. The temperature set regulation shall be: -24°C – -23°C – -22°C -13°C – -12°C.
2. Press Temperature-drop key D once, the temperature will go down for 1°C; After locking, the refrigerator will run upon the set value. The temperature set regulation shall be: -12°C – -13°C – -14°C — -22°C – -23°C – -24°C.
- Fahrenheit temperature
1. Press Temperature-rise key C once, the temperature will go up for 1°C; After locking, the refrigerator will run upon the set value. The temperature set regulation shall be: -11°F- -10°F – -9°F– 9°F- 10°F.
2. Press Temperature-drop key D once, the temperature will go down for 1°F; After locking, the refrigerator will run upon the set value. The temperature set regulation shall be: 10°F – 9°F- 8°F– -9°F- -10°F- -11°F.
Fast Freezing Function
- Enter Fast Freezing mode Press Fast Freezing key B, after locking, the Fast Freezing function is activated.
- Exit of Fast freezing When in Fast Freezing mode and unlock state,Press Fast Freezing key B or Temperature-rise key C or Temperature-drop key D,the Fast Freezing function exits.
  When the running time in fast freezing model reach 24 hours, fast freezing mode will exit automatically.
  When Celsius is set, “-24” will appear in display screen, and compressor will continuously operate;
  When Fahrenheit is set, “-11” will appear in display screen, and compressor will continuously operate;
Error Code
If the failure happens, the display area will show corresponding error codes as shown as below table, the user shall contact a specialist for maintenance, so as to make sure the normal use of freezer. Error Code| Description
---|---
E2| Temperature sensor failure of freezing chamber
E9| Failure of high temperature alarm
Memory function
The chest freezer has the power off memory function. When power on again, the chest freezer will operate according to the set value before power off.

Placement

Before using the freezer, remove all packaging materials including bottom cushions and foam pads and tapes inside the freezer, tear off the protective film on the door and the freezer body.
The freezer should be placed in a well-ventilated indoor place; the ground shall be flat, and sturdy .
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
The top space of the freezer shall be greater than 70cm, and the distances from both sides and backside shall be more than 20cm to facilitate heat dissipation.

Start to use

The freezer shall stay for half an hour before connecting power when it is firstly started.
The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the freezer shall run for more than 4 hours in summer in advance considering that the ambient temperature is high.

Energy saving tips

The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.

Maintenance of freezer

Cleaning

Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling effect and energy saving. The interior of the freezer should be cleaned regularly to avoid odor. Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the power is turned on.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean freezer considering that this may damage the fridge surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties. Please use a dry cloth when cleaning temperature control knob and electrical components.

Please unplug the freezer for defrost and cleaning.

Defrost

Freezer shall be manually defrosted. Unplug the freezer and open the freezer door, remove foods and shelving basket before defrosting; Open the outflow hole and drainage hole (and place water container at the outflow hole); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice scraper might be used to the accelerate de-icing process.
Please remove the food and put in a cool place when defrosting before removing accessories.

Other mechanical devices or other means shall not be used to accelerate except those recommended by the manufacturer. Do not damage the refrigerant circuit.

Stop using

Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to reduce the frequency of opening door and do not put fresh foods into the freezer. Please unplug the freezer left unused for a long time for cleaning. Keep the door open to avoid the bad odor.
Do not turn upside or vibrate the freezer, the carrying angle can not be greater than 45` . Please hold the door and hinge when moving.

Continuous operation is recommended when the freezer is started. Please do not stop the freezer under normal circumstances so as not to affect the freezer’s service life.

Trouble shooting

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not settled.

In operation| Whether the freezer is plugged and connected to power; Low voltage;
Whether temperature control knob is in the work area; Failure power or tripping circuit.
---|---
Odor| Odorous foods should closely wrapped; Whether foods are rotten;
Whether the interior shall be cleaned.
Long-term operation of compressor| It is normal that freezer operates for longer time in summer when the ambient temperature is higher; Do not put too much food in the freezer at one time; Do not put foods until they are cooled;
Frequent opening of freezer door;
Thick frost layer (defrost is needed).
Illuminating light does not shine| Whether the freezer is connected to power, whether the light is damaged.
The freezer door can not be properly closed| The freezer door is stuck by food packages;
To much food:
Unbalanced freezer.
Loud noises| Whether the floor is flat, whether the placement of freezer is stable;
Whether the freezer accessories are properly placed.
Transient difficulty in door opening| After refrigeration, there will be pressure difference between the inside and outside of the freezer to result in transient difficulty in door opening. This is a normal physical phenomenon.
Freezer enclosure heat Condensation| The freezer enclosure may emit heat during operation specially in summer, this is caused by the radiation of the condenser, and it is a normal phenomenon. Condensation: condensation phenomenon will be detected on the exterior surface and door seals of the freezer when the ambient humidity is high, this is a normal phenomenon, and the condensation can be wiped away with a dry towel.
Airflow sound
Buzz
Clatter| Refrigerants circulating in the refrigerant lines will produce eruption of sound and grunts which is normal does not affect the cooling effect.
Buzz will be generated by running compressor specially when starting up or shutting down.
The solenoid valve or electric switch valve will clatter which is a normal phenomenon and does not affect the operation.