Croydex AP506000 Series Stainless Steel Contemporary Grab Rail Installation Guide
- October 30, 2023
- Croydex
Table of Contents
Croydex AP506000 Series Stainless Steel Contemporary Grab Rail
Product Information
This product is a modern grab bar that can be used in bathrooms or other areas where extra support is needed. The product comes in four variations with model numbers AP506105, AP506205, AP506305, and AP506405. The grab bar has a maximum weight capacity of 100kg (220lbs) and is suitable for solid brick, concrete block walls or similarly strong materials offering appropriate support for the maximum safe working load.
Product Usage Instructions
- Always take care when using power tools, particularly if there is any water in the working area.
- For different wall types, you will need to ensure that you are using the correct type of fixing for the material of the wall. Wall fixings are not supplied with this product.
- This product must only be fitted to solid brick, concrete block walls or similarly strong materials offering appropriate support for the maximum safe working load. Make sure to use the correct type of fixing for the material of the wall.
- When drilling into a tiled surface, do not use a hammer drill. Use a drill bit that is suitable for the surface that is being drilled.
- Always use a drill bit that is suitable for the surface that is being drilled.
- To retain the best quality finish, clean the product regularly with a soft damp cloth. Do not use abrasive or chemical cleaners as these will damage the product.
- The maximum safe working load for the product is 100kg distributed evenly.
Please read the information sheet before proceeding.
WARNING
TOOLS REQUIRED
Icon Library
Please read all of the informationcarefully and refer back when you see the numbered icons throughout instructions
Safety and Care
- Always take care when using power tools, particularly if there is any water in the working area.
- For different wall types you will need to ensure that you are using the correct type of fixing for the material of the wall. Wall fixings are not supplied with this product.
- This product must only be fitted to solid brick, concrete block walls or similarly strong materials offering appropriate support for the maximum safe working load.
- When drilling into a tiled surface do not use a hammer drill.
- Always use a drill bit that is suitable for the surface that is being drilled.
- To retain the best quality finish, clean product regularly with a soft damp cloth.
- Do not use abrasive or chemical cleaners, as these will damage the product.
- The maximum safe working load for the product is 100kg distributed evenly.
Not supplied
INSTALLATION
Croydex, Central Way, Andover, Hampshire, SP10 5AW, UK
+44 (0) 1264 365881
+44 (0) 1264 356437
info@croydex.co.uk
www.croydex.com
S&H 066 R01