hama 00200007 Universal USB C Power Supply Unit Instruction Manual
- May 15, 2024
- Hama
Table of Contents
92niversal USB-C Notebook Power Supply
Operating instruction
-
Explanation of warning symbols and notes
Risk of electric shock
This symbolindicates arisk of electric shock from touching product parts carrying hazardous voltage.
Warning
This symbolisused to indicate safetyinstructionsorto draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes. -
Package contents
• Universal USB-C notebook power supply unit
• Power cord
• These operating instructions -
Safety instructions
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Ensurethereissufficient scope for heat dissipation and ventilation.
• Only use the article undermoderate climaticconditions.
• Do not use the product in areas in which electronic productsare notpermitted.
• Do notuse the productinadamp environment and avoid splashingwater.
• Do not short-circuit the battery of the opened terminal device. Thereisarisk of explosion.
• Protect the product from dirt, moistureand overheating and use it in dry environments only.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits specified in the technical data.
• Always pulldirectly on the plug when disconnecting the cable, never on the cable itself.
• Make surethat cables do not pose atripping hazardor block emergency exits.
• Do not bend or crush the cable.
• As with allelectrical products, this device should be kept out of the reach of children.
• Do not modify the device in any way.Doing so voids the warranty.
• Keep the packaging material out of the reachofchildren due to the risk of suffocation.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Make surethat the connected device meets the requirements for supply through class PS3 power sources.
If thereisany doubt, ask your device manufacturer.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter,adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself.Leave any and allservice work to qualified experts. -
Start-up and operation
Note –mains voltage 100 –240V
The power supplyunitissuitable formains voltages of 100 –240Vand therefore can
be usedworldwide.
Please note that acountry-specificadapter may be necessary.
- Ensurethat your notebook requires asupplyvoltage of 5V /9V/12 V/15V /20V (+/- 1Volt).
- Youcan find thisinformation on the original power supply unit or in your terminal device’s operating manual. If necessary, ask the dealer who supplied your terminal device or contact your terminaldevice manufacturer’s support service.
Warning
- Do not use the universal notebook power supply unit if you areunable to definitively determine your terminal device’s supply voltage.
- Ensurethat the notebook’s total power consumption does not exceed the power supply unit’srated output of 92W.
- Failuretocomply with thismay cause damage to the universal notebook power supply unit and the connected terminal device!
Note the instructions in your device’s operating manual.
If these do not contain any instructions expressly to the contrary,proceed as
follows:
Note –PowerDelivery
-
Plug &GO: no additional softwarerequired, simply plug in and start:
Thanks to Power Delivery/Thunderbolt™ 3/Quick Charge, the voltage and power areadjusted automatically. -
Be awarethat, for efficient and optimised charging, your terminal device must support the PD (Power Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge) function.
-
If you have alarge number of PD/TBT3/QC-enabled terminal devices with different firmwareupdates, it may be that the function is not fully supported.
Warning
- Only operate the product from asocket that has been approved for the device. The socket must be installed close to theproduct and must be easily accessible.
- Disconnect the product from the powersupply using the On/Off switch –ifthis is notavailable, unplugthe power cordfromthe socket.
- If usingamulti-socket power strip, make surethatthe total powerconsumption of allconnected devices does not exceed the power strip’s maximum throughput rating.
- Connect the power cordtothe power supply unit and your terminal device.
- Then connect the mains plug to aproperly installed socket.
- The terminal device can now be used and switched on / charged.
Note
Disconnect the product from the mains after use.
Care and Maintenance
Note
Disconnect the product from the mains beforecleaning.
- Only clean thisproduct withaslightly damp, lint-free cloth and do not use aggressivecleaning agents.
- Ensurethat no water is able to enter the product.
Warranty Disclaimer
Hama GmbH &CoKGassumes no liability and provides no warrantyfor damage
resulting from improperinstallation/ mounting, improper use of the product or
from failureto observe theoperating instructions and/or safety notes.
Technical data
Specifications in accordance with Regulation (EU) 2019/1782
Manufacturer’snameortrade mark, commercial registration number and address|
Hama,HRA12159, Dresdner Str. 9,
86653 Monheim
---|---
Model identifier| 200007
Input voltage| 100 –240V
Input AC frequency| 50 /60Hz
Output voltage/ Output current/ Output power| 5.0 VDC/3.0 A/15.0 W
9.0 VDC/3.0 A/27.0 W
12.0 VDC/3.0 A/36.0 W
15.0 VDC/3.0 A/45.0 W
20.0 VDC/4.6 A/92.0 W
Average active efficiency| 81.40%
Efficiency at lowload (10 %)| 79.20%
No-load power consumption| 0.10 W
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0