SelectBlinds 2-Inch Classic Wood Instruction Manual
- June 4, 2024
- SelectBlinds
Table of Contents
SelectBlinds 2-Inch Classic Wood Instruction Manual
1 TOOLS
GETTING STARTED – TOOLS NEEDED FOR INSTALLATION Rechargeable Drill with 1/4″ Hex Bit / Phillips Screwdriver / Pencil / Tape Measure
2 UNPACKING THE PARTS
Locate the parts and brackets in hardware box. The quantity will vary with
blind size.
Hold-down parts will only be sent for blinds that have requested this option.
Center Support Bracket will only be sent for blinds over 37″ wide.
3 BRACKET PLACEMENT
4 VALANCE CLIPS & WAND
5 FINISHING UP
6 OPERATING INSTRUCTIONS
Raise or lower the blind by lifting or lowering the bottom rail to the desired
height.
PLEASE NOTE: This product is made up to +6″ of ordered height. Blinds over 84″
may include up to 10″ of additional height. This is normal for this product
and not considered a manufacturing error or defect.
Open or close the blind slats by turning the wand until the slats are opened
or closed to the desired amount.