VORGUT P7 Portable Power Station User Manual

User Manual
VORGUT P15/P10/P7 Power Station

P7 Portable Power Station

WARNING
Read the ENTIRE User Manual before operating. Failure to operate the product correctly may result in damage to the product or personal property and cause serious injury. VORGUT will not assure any legal responsibility. DO NOT use the product with incompatible components or alter the product in any way without following the instructions provided by VORGUT. Failure to follow these instructions will render VORGUT after-sales services and the product warranty void. These Safety Guidelines include instructions for safety, operation and maintenance. It is important to read and follow the instructions and warnings in the user manual before assembly, setup, or use.

Product Safety Guidelines

WARNING
Improper use may result in fire, property damage, or personal injury. Make sure to use the product according to the following safety rules and guidelines.
Product Use:

1. Do not expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries out in the rain or near a source of moisture. Moisture in the VORGUT could cause short circuits, component failure, fires or even explosions.

2. Never install or remove other modules from the VORGUT when it is turned on. DO NOT plug or unplug other modules when the power of the product is turned on, otherwise the power interface may be damaged.

3. Using the product in environments above 140ºF (60°C) may cause fires or explosions. Using the product below -4ºF (-20°C) will severely affect the performance of the product. Allow the product to return to a normal operating temperature before using it.

4. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery control board may malfunction and cause a serious accident during use.

5. Never disassemble or puncture the product in any way. Otherwise, it may leak, catch on fire, or explode.

6. DO NOT use the product if it was involved in a crash, accident, or a forceful jolt.

7. DO NOT put the product in a microwave oven or in a pressurized container.

8. DO NOT allow pins, wires, or other metal pieces to enter the VORGUT case, outlets, or controls. Metal pieces may short circuit the product.

9. Avoid collisions. DO NOT place heavy objects on top of the VORGUT

10. If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and result in energy loss or the inability to charge.

11. Store the product in a dry and ventilated place.

12. If the product falls into the water during use, take the product out immediately and put it in a safe and open area.
    Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly.

13. It is recommended to use moisture barrier bags in wet environments (for example, places by the sea ) to prevent the product from getting soaked. If water is found inside the product, it must not be used or turned on again. Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof and open area. Once complete contact VORGUT Customer Service immediately.

Product Charging:

1. Always use Vorgut approved charging cables. Vorgut does not take any responsibilities for any damages caused by using non- Vorgut charging cables.
2. When charging, please place the product on the ground with no faammable or combustible materials around it. To prevent accidents, never leave the device unattended during charging.
3. DO NOT charge the device immediately after a long heavy load, because the device temperature may become too high. DO NOT charge the device until it cools down to room temperature.

Product Storage and Transportation:

1. Keep the product out of the reach of children. If any child accidentally swallows any parts, please seek medical attention immediately.
2. If a low-battery warning appears, charge the product before storing it. Otherwise, long-term storage may cause damage to the batteries in the product. Batteries in the product will enter hibernation mode if they are depleted and stored for a long time. Recharging the product can bring the battery out of hibernation.
3. DO NOT place the product near a heat source, such as inside a car in direct sunlight, a fire source, or an operating stove.
4. Store the product in dry environments and keep it away from water.
5. Make sure no objects can fall on or around the product while it’s being stored.
6. Never ship a product with a battery power level higher than 30%.

Product Battery Disposal:

1. Dispose of Vorgut in specific recycling boxes only after a complete discharge. Batteries are hazardous chemicals.
   Please strictly follow your local regulations regarding the battery disposal and recycling.

2. Dispose of the product if it cannot be powered on after over-discharging.

Travel Notice:
Do not bring this product on fiights.

Product Maintaince:

1. Temperature for normal use and storage of this product is -4°F to 113°F (-20°C to 45°C) and temperature for optimal use and storage of this product is 68°F to 77°F (20°C to 25°C).
2. If the product is not used for a long time, the battery life may be reduced.
3. Discharge VORGUT POWER STATION to 30%, then charge to 85% every 3 months to keep the battery healthy.

Congratulations!
You are now an Vorgut Power Station user. This brief pamphlet is meant to help you. Please take some time to read it carefully before using the product

Features of VORGUT Power Station:

LCD Display:

| Warning Indicator: The Warning indicator will appear when the device is faulty. Turn off the device and restart it.
---|---
| Fan Indicator: The Fan indicator icon will appear when the cooling fan working
| Battery Level Percentage: Shows the Shows the remaining power (%). If the display shows 0%, please charge power station immediately.
| Input Power Indicator: Shows the current input power in watts.
| Output indicator: Shows the current output power in watts.
| Output Frequency: The output frequency is 50Hz
| Output Frequency: The output frequency is 60Hz
| AC Indicator: The AC indicator icon will appear when the AC power button is turned on.
| USB Indicator: The USB indicator icon will appear when the USB port is in use
| DC Indicator: The DC indicator icon will appear when the DC power button is turn on

VORGUT P7 Specifications:

General Specs
Model Number: P7
Dimensions: 11.8×7.5×9.8in (30x19x25cm)
Capacity: 666Wh/208000mAh
Testing and certification: CE, FCC, RoHS, UN38.3,MSDS
Outputs
AC Output: 2x700W (surge 1000W)
USB-A Output (x2): 5V 2.4A, 12W Max, per port
USB-A Fast Charge (x1): 18W
USB-C Output (x1): 5V 2.4A, 12W Max, per port
USB-C Fast Charge (x1): 65W
Car Power Output (x1): 12.6V 8A, 100W Max
Inputs
AC Charge Input Voltage: 360W
Solar Charge Input: 12-30V, 100W Max
Car Charger: 12V, 8A
Battery
Cell Chemistry: LiFePO4 Battery
Discharge Temperature: -10°C to 40°C (±3°C)
Charge Temperature: 0°C to 40°C
Shelf Life: 1 Year (after fully charging the device)
Cycle Life: 3000 cycles to 80%+ capacity

VORGUT P10 Specifications:

General Specs
Model Number: P10
Dimensions: 14×7.5×9.8in (35.5x19x25cm)
Capacity: 1075Wh/336000mAh
Testing and certification: CE, FCC, RoHS, UN38.3,MSDS
Outputs
AC Output: 2x1200W (surge 2000W)
USB-A Output (x2): 5V 2.4A, 12W Max, per port
USB-A Fast Charge (x1): 18W
USB-C Output (x1): 5V 2.4A, 12W Max, per port
USB-C Fast Charge (x1): 65W
Car Power Output (x1): 12.6V 8A, 100W Max
Inputs
AC Charge Input Voltage: 850W
Solar Charge Input: 12-30V, 500W Max
Car Charger: 12V, 8A
Battery
Cell Chemistry: LiFePO4 Battery
Discharge Temperature: -10°C to 40°C (±3°C)
Charge Temperature: 0°C to 40°C
Shelf Life: 1 Year (after fully charging the device)
Cycle Life: 3000 cycles to 80%+ capacity

VORGUT P15 Specifications:

General Specs
Model Number: P15
Dimensions: 14×7.5×9.8in (35.5x19x25cm)
Capacity: 1340Wh/420000mAh
Testing and certification: CE, FCC, RoHS, UN38.3,MSDS
Outputs
AC Output: 2x1500W (surge 2500W)
USB-A Output (x2): 5V 2.4A, 12W Max, per port
USB-A Fast Charge (x1): 18W
USB-C Output (x1): 5V 2.4A, 12W Max, per port
USB-C Fast Charge (x1): 100W
Car Power Output (x1): 12.6V 8A, 100W Max
Inputs
AC Charge Input Voltage: 850W
Solar Charge Input: 12-30V, 500W Max
Car Charger: 12V, 8A
Battery
Cell Chemistry: LiFePO4 Battery
Discharge Temperature: -10°C to 40°C (±3°C)
Charge Temperature: 0°C to 40°C
Shelf Life: 1 Year (after fully charging the device)
Cycle Life: 3000 cycles to 80%+ capacity

How to recharge VORGUT Power Station:

VORGUT Power Station has an AC charging port and a solar panel charging port located on the side. VORGUT can be charged with a 12V car charger, solar panels, or with AC power.
Charging Cable
1/About 1.5 hours (Rapid charge)
Generator generation
Use standard charger for about 1.5 hours (Quick charge)
500W solar photovoltaic panel
About 3.5 hours
(Charging time is determined by solar intensity)
Support solar photovoltaic panel MPPT function charging(12V-30V)

VORGUT Power Station FAQ:

I can not recharge my VORGUT power station?

Please ensure your power source is activated. There is an indicator light near the VORGUT input port which should be lit after you connect your power station to a power source, such as from the AC adapter via your wall outlet or a solar panel. If the display on the screen shows none or a very low input wattage, and/or the indicator light is off, please email support@vorgut.online with your order information, a legible picture of the front panel of your power station with the input port indicating the light and screen display, so that we could provide further assistance.

My VORGUT won’t charge my device?

Please follow the steps to ensure your VORGUT is charging your device: 1.Check if there is enough power available to charge your device. 2. Make sure the power capacity of your VORGUT power station is larger or equivalent to the power wattage of your device. 3. There is a power button near each group of output ports. You need to press the power button of the output port that your device is connected to to initiate the charge. The output indicator light will appear on the LED Display Screen if the power is turned on. If the indicator light is not lit after you press the power button, this suggests your power station may have some issues. Please email support@vorgut.online with your order information, a legible picture of the front panel of your power station with the power button and screen display, so that we could provide further assistance.

Can the Wall charger(AC Adapter) be used at the same time as the solar panels?

Yes, AC input and Solar input can be used simultaneously

Can the VORGUT Power devices and Charge at the same time?

Yes, VORGUT can power devices at the same time as charging.

How to store the VORGUT Power Station?

Store VORGUT in a dry and cool environment, away from any abrasive objects. DO NOT store or place device near water. Please turn off the VORGUT and store it within its recommended use and storage temperature range. If you need to store the VORGUT power station for a long time, please discharge the device to 30%, then charge it to 85% every 3 months

Are the VORGUT Power Station equipped with MPPT?

Yes, all Vorgut power stations have a built-in MPPT (Maximum Power Point Tracking) controller.

How to calculate the runtime and capacity? How do i know my charging time?

For example, if you need to charge a 60W fan by using the 12V DC port of VORGUT P15 which comes with 1340Wh of capacity, the runtime of DC charge would be approximately 22.3hours (1340Wh / 60W = 22.3hrs). The runtime will be less if 110V AC power from a power station is used mainly due to AC-DC-AC conversion loss. By applying an average 20% of conversion loss, the runtime of AC charge is about 17.8 hours (1340Wh x 0.8 / 60W = 17.8hrs).

Why i can’t turn off my VORGUT Power Station?

Please make sure there is no outputs working. You can check the LCD Display Screen to make sure all outputs are turned off. Then hold and press the button for 3 seconds to try again.

More questions?

Please Email to: support@vorgut.online

WARRANTY

What is your standard warranty policy?
The warranty period for VORGUT power products is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable  documentary proof, is required in order to establish the start date of the warranty period.
Return and refund are restricted to orders under 30-day from the date of purchase. Replacement or Fix Process is for orders under the 5 year warranty.
VORGUT Warranty does not apply to?

• Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in VORGUT’s current product literature.
• Attempted repair by anyone other than an authorized facility. VORGUT products only sold through Amazon and offcial Website

Contact VORGUT to Get Warranty
Email Address: support@vorgut.online
Website: www.vorgut.online

Contact us:
Website: www.vorgut.online
Email: support@vorgut.online
www.vorgut.online

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>