Bestier V001-071523-01 5 in 1 Hall Tree with LED Lights Instruction Manual
- June 17, 2024
- Bestier
Table of Contents
Bestier V001-071523-01 5 in 1 Hall Tree with LED Lights
Specifications:
- Weight: 6.6 lbs / 3 kg
- Dimensions: 8.5/21.5 cm
- Maximum Load Capacity: 22 lbs / 10 kg
Product Information:
The Hall Trees product is designed to provide storage solutions for your
entryway or hallway. It comes with a detailed assembly instruction manual to
guide you through the setup process. The product has a weight capacity of 22
lbs and is made of durable materials to ensure longevity.
Assembly Instructions:
- Inspect the product packaging to ensure it is in good condition.
- Read the assembly instructions carefully and follow them step by step.
- Place a soft blanket on the floor to avoid scratching during assembly.
- Identify, sort, and count all parts with tags.
- Find the installation position according to the provided drawing.
- Assemble the Hall Trees product following the correct steps outlined in the manual.
- Use caution when using power tools and avoid harsh chemicals or abrasive cleaners.
Detailed Installation for LED Strip:
Remove about 25mm (1″) of adhesive tape at both ends of the LED light strip
before installation.
FAQ :
-
Q: How many people are required for assembly?
A: 1-2 people are needed for assembly. -
Q: What is the estimated assembly time?
A: The estimated assembly time is between 0.5-1 hour. -
Q: What is the weight capacity of the product?
A: The product has a maximum load capacity of 22 lbs or 10 kg.
BEFORE YOU START
- Inspect product packaging to ensure the appearance is good.
- Read the assembly instruction carefully and follow it step by step.
- To avoid any scratching, putting a soft blanket on the floor is suggested.
- Identify, sort and count all the parts with tags.
- Find out installation position according to the drawing and install it in correct steps.
OTHER
- People needed for assembly: 1-2.
- Estimated assembly time: 0.5-1h.
CAUTION
- Be cautious when using a power drill or power screwdriver.
- Please be aware to slow down and stop when screw is nearly tight.
- Do Not use any harsh chemicals or abrasive cleaners for this item.
- Push, pull or drag this item carefully.
DETAILS
PART LIST
ACCESSORY LIST
Detailed Installation for LED Strip
- Remove about 25mm (1 “) of adhesive tape at both ends of LED light strip.
- The head and tail of the LED light strip are stuck into the grooves at both ends, and the fixing parts at both ends are locked with screws.
- Tear off the whole protective paper, and flatten the strip light so that the LED light strip is completely adhered to the wood.
- Lock the remaining fixings.
INSTALLATION STEPS
Please refer to “Detailed Installation for LED Strip” on page “9”.
Take out the insulator before using the remote control.
Love coming home.
Comfort Zone Co ,Limited
RM1903 19F BeiYou technology Building, Yuehai Street, No.42 Gaoxin South Ring
Road,Nanshan,Shenzhen
CUSTOMER SUPPORT
- North American
- Europe
- Asia
- 04-8888-0283 Service.JP@bestier.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>