Happybuy Multi Function Shower Panel Instructions
- May 15, 2024
- Happybuy
Table of Contents
Happybuy Multi Function Shower Panel
TO GET STARTED
- Before you begin, read all instructions carefully. This manual is a graphic reference for installation purposes. Some graphic elements and components may differ.
- Inspect the unit carefully to ensure there is no damage or defects. If such is the case, please contact us freely.
- Make sure you have received all parts (tools not included).
- Consult local building codes to ensure that installation complies with standards in your area.
WE STRONGLY SUGGEST YOU LET A SPECIALIST PROCEED WITH THE INSTALLATION
TECHNICAL DATA
- Operating pressure: Max.1 MPa
- Recommended operating pressure: 0.22-0.5MPa
- Test pressure: 1.5MPa (1MPa=10bar=147 PSI)
- Hot water temperature: Max.176″F
- Recommended hot water temperature: 149″F
- Connections (cold right-hot left): G1/2
RECOMMENDED TOOLS FOR INSTALLATION
PARTS LIST
-
A Gasket*2 Pcs -
B Screws*4 Pcs
-
C Screwanchor*4 Pcs
-
D Hose clamp* 2 Pcs
-
E Screws*5 Pcs
(Rain panel & Shower panel screws) -
F Mounting brackets*2 Pcs
INSTALLATION
-
STEP1: Rain shower and Body shower panel connect
-
STEP 2: Hand-held shower holder installation.
-
STEP3: Measurement
- Adjust the plumbing to ensure that there is adequate space for the shower to be installed.
- Establish the precise height and position of the unit on the wall.
- We recommend leaving a 10″(25 cm) space between the shower head and the average height of the people in the house as well as a minimum distance of 1″(2.5 cm) from the ceiling.
- Measure the total height A from the floor to the bottom of the shower panel,
- Measure the distance C between the lower bracket and the bottom of the shower panel,
- Measure the distance B between the 2 brackets, Ill Project this measurement onto the wall to install the mounting brackets.
Mark the position of each screw hole of both mounting brackets on the wall using a pencil.
-
STEP4: Mounting Brackets Installation
-
STEP5: Water supply checking and supply hoses connection
-
STEP6: Hand shower connection
-
-
STEP7: Test
- No water leakage at any connection;
- All shower modes work well.
CARE AND MAINTENANCE
- Wipe with a soft towel after each use. Use mild dishwashing detergent to keep surfaces bright and clean. Rinse well and dry with a clean cloth.
- Powdered detergents and abrasive liquid cleaners may damage surfaces.
- Do not allow the surface to come into contact with corrosive products such as acetone, nail polish remover, dry cleaning solution, lacquer, paint thinner, gasoline, or etc.
- Any cleaning product should be tested on an inconspicuous surface before using to clean.
MORE DESIGN
- The shower panel designs are different, the instructions just for reference for the installation and usage.
- The Specific operations are subject to the actual shower panel.
Read User Manual Online (PDF format)
Loading......