siig 3C1A 200W GaN PD Combo Charger User Manual
- June 5, 2024
- SIIG
Table of Contents
siig 3C1A 200W GaN PD Combo Charger
Features
- New Gallium Nitride (GaN) semiconductor material
- Supports AC input 100-240V, 50/60Hz, 2.SA
- 4 ports total output 200W max Supports USB-PD 3.0 PPS
- Supports USB-PD 3.0 output 1 00W max Supports QC 3.0 output
- Over-load, Over-voltage, over-current and short circuit protection.
Package contents
- 200W GaN PD Combo Charger
- AC power cable
- Quick Start Guide
Layout
-
Type-CPD Output 1:
100W max 5V/3A, 9V/ 3A, 12V/3A, 1S V/ 3A,20V/5A -
Type-C PD Output 2:
100W max 5V/3A, 9V/ 3A, 12V/3A, 1S V/ 3A,20V/5A -
Type-C PD Output 3:
65Wmax 5V/3A, 9V/ 3A, 12V/3A, 1S V/ 3A,20V/3.25A -
Type-A QC3.0 Output 1:
60Wmax SV/ 4.SA, 5V/3A, 9V/3A, 1 2V/3A,20V/3A -
AC input:
100-240V 50/60Hz, 2.SA max
Notice
When C3 and A1 use simultaneously, they can only share 24W max (5V/2.4A +
5V/2.4A)
Application
Note:
- If without loading, its internal consumption is about <300mW.
- Always Unplug the Charger from the power source when not in use
- DO NOT place the Charger on heated surface or next to other heat sources
- DO NOT attempt to replace any parts or open the case of the Charger, opening the case can cause personal injury due to electrical hazard and will void the manufacturer warranty
- DO NOT expose the Charger to liquids or excessive heat
- DO NOT use corrosive cleaning sub stances on the Charger Keep out of the reach of children
- For optimal charging speed, we recommend using your device’s original equipment USB charging cable.
Support
For more info or tech support http://www.siig.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>