ROTEL P5 Series 2 Stereo Control Amplifier Owner’s Manual
- May 15, 2024
- ROTEL
Table of Contents
ROTEL P5 Series 2 Stereo Control Amplifier
Specifications
- Model: P5 Series 2
- Power Output: Not specified
- Inputs: Line-Out, MONO SUB-Ausgang, Preamp-Ausgang, Erdungsanschluss, 12-V-Triggersignal, USB POWER-Port, RS232, aptXTM HD Bluetooth, Netzeingang
- Outputs: Not specified
- Supported Connections: Plattenspieler, Subwoofer, Automatisierungssystem
Parameter | Specification |
---|---|
Harmonic Distortion (20-20,000 Hz) | < 0,002 % |
Intermodulation Distortion (60 Hz: 7 kHz, 4:1) | < 0,002 % |
Phono Input Sensitivity/Impedance | MM: 2,5 mV/47k Ohm, MC: 250 uV/100 Ohm |
High Level Input Sensitivity/Impedance (Cinch) | 160 mV/47k Ohm, (XLR) 250 |
mV/100k Ohm
Output Level| High Level (Cinch) 1 V / 470 Ohm, Balanced (XLR) 2 V / 100 Ohm
Frequency Response| Phono-Eingang 20 – 20,000 Hz, ±0,3dB, High Level Eingange
10 – 100,000 Hz, ±0,3dB
Channel Separation| Bass: >80 dB, Treble: >116 dB
Signal to Noise Ratio (IHF A)| Phono-Eingang >55 dB, High Level Eingange >85
dB
Power Requirements| Europe: 230 V, 50 Hz, USA: 120 V, 60 Hz
Power Consumption| Normal: 40 Watt, Standby: < 0,5 Watt, Network Standby: < 2
watts
Dimensions (W x H x D)| 485 x 150 x 452 mm, Height Front Panel: 132 mm
Net Weight| 22,9 kg
Product Usage Instructions
Safety Instructions:
Only authorized personnel should use the RS232 connection.
When making connections:
- Turn off all components before hooking up or changing connections.
- Turn the volume control down before turning the amplifier on or off.
Controls and Connections:
The product features several controls and connections:
- SOURCE-Regler: Source control
- Display: Display function
- VOLUME Drehregler: Volume control
- Fernbedienungssensor: Remote control sensor
- Power-Taste: Power button
To connect with a turntable:
- Line-Out: Connect to a turntable
- MONO SUB-Ausgang: Connect to a subwoofer
- Preamp-Ausgang: Preamp output
- Erdungsanschluss: Grounding connection
Integration with Automation System:
The product supports integration with an automation system via the RS232
connection and aptXTM HD Bluetooth.
Playable Audio Formats
- aptX™ HD Bluetooth: Supports wireless streaming from compatible devices.
- PC-USB: Supports PCM up to 32bit/384kHz, DSD (DoP), MQA and MQA Studio, and is Roon Tested.
- Coaxial/Optical: Supports SPDIF LPCM up to 192 kHz/24 Bit.
Troubleshooting
- If the POWER LED does not light up, check the power supply and connections.
- In case of no sound, ensure signal sources are properly connected and the amplifier is not muted.
- If Bluetooth pairing is not possible, ensure the device is compatible and within range.
Contact Information
For further assistance, contact the Michi support team through the relevant regional office:
- Rotel Global Office (Hong Kong)
- Rotel USA (Maple Grove, MN)
- Rotel Canada (Pickering, ON)
Additional details can be found at www.michi-hifi.com.
Rotel Global Office Room 1903, 19/F., Dominion Center 43-59 Queen’s Road East
Wanchai Hong Kong Tel: 852 2793 9378 Fax: 852 3583 5035 Rotel USA 11763 95th
Avenue North Maple Grove, MN 55369 USA Phone: +1
510-843-4500 Rotel Canada Kevro
International 902 McKay Rd. Suite 4 Pickering, ON L1W 3X8 Canada Phone: +1
905-428-2800 www.michi-
hifi.com
Michi P5 Series 2 Owner’s Manual Ver P 081523 Deutsch
FAQ
Can the P5 Series 2 be connected to a computer?
Yes, the P5 Series 2 supports connection to a computer via the USB POWER-Port.
How to dim the front display?
Use the DISPLAY-Taste button to dim the front display.
How do I update the software of the Michi P5 Series 2?
Updates can be performed via the USB port on the rear panel using a USB flash drive.
What is the function of the RS232 port?
The RS232 port is designed for integration into automation systems.
How do I configure network settings?
Network settings can be configured through the on-screen display (OSD) using the remote control.
What audio settings are available in the system configuration?
Options include Bluetooth LED, Power On Max Volume, PC-USB Option, PC-USB Decoding, and Phono Stage.
What should I do if I encounter a malfunction?
Consult the troubleshooting section in the owner's manual, and if necessary, contact Michi support or an authorized dealer.