TITAN ARMY N32SQ PLUS 32 Curved Gaming Monitor User Manual

USER MANUAL FOR MONITOR

N32SQ PLUS

Precautions

Before using this product, please read this User Manual carefully and keep it well

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.

• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.

• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.

• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.

• The range of the supply voltage of the monitor is printed on the label on the rear casing.
  If it is impossible to determine the supply voltage, please consult the distributor or local power company.

• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.

• Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.

• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.

• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.

• Do not pull or twist the power cable forcedly.

• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Package Content

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.

• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.

• Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.
  

• Redundant screws can be used as spare screws.

Installation

Installation of base

1. First open the carton, take out the foam and align the table top, after taking out the inner packaging, put the body on the foam. Press the lock vertically by hand to remove the hinge assembly.

2. Use 2 screws to lock the shaft assembly and bracket, and then lock 3 screws to the base.

3. As above, vertically push the lock catch.Put stands assembly parts into slot of back coveraccordingly and make them mechanically placed.Hold the middle of stand and make surethe monitor won’t drop out.
   

4. After assembly, simply hold the stand with hand to stand the monitor upright.
   Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.

Installation of mount

1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. If the monitor is already attached to the stand, remove the stand.

2. If the stand was not installed, press the button to remove the stand plate.
   

3. Remove the original screws x4 from the opening in the back of the monitor and put them aside. Then use the screws provided to attach the adapters inside the opening.
   

4. Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.
   

Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it fully.
Do not place or hang any object on the mount, and the using height of the mount should be less than 2 meters.

Adjustment of monitor

Instructions

Description of buttons

crosshair
| Up button: Press to move up in the menu/quickly adjust the contextual mode
| Exit/hot key: Press to return to the previous menu/quickly switch input signals of the port
| Power button: Press to turn on/o the monitor
| LED lndicator: Changes colors to indicate status.

Explanation of indicator light

Indicator: A steady blue light indicates that the power is on and the monitor is operating normally. Blue light flashes to indicate There is no video source and no horizontal or vertical signal or low voltage is detected.
Make sure your computer It is turned on and all video cables are fully plugged in and/or connected.

Cable connection:

• The bottom interface configuration at the back of the monitor varie with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

HDMI interface

Use the HDMI cable to connect the HDMI IN interface
of the product to the HDMI OUT interface of a PC.| Use the HDMI-DVI cable to connect the HDMI IN interface of the product to the DVI OUT interface of a PC.
(In general, PCs do not transfer video signals to the monitor through the DVI OUT  interface , and it is necessary to connect a loudspeaker box additionally to play  sounds of PCs.)
---|---

DP interface
Use the DP cable to connect the DP IN interfacof the product to the DP OUT interface of a PC.

AUDIO OUT
Connect audio outputting devices such as earphones to the AUDIO OUT interface.

AC IN
Please connect the power cable plug to the corresponding port of the monitor, and connect the other end to a properly grounded power outlet.

OSD menu

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press the button to activate the browser screen.

2. Press  or to scroll through the functions.
   – Select the desired function, and press to enter the sub-menu.
   – Press  or to scroll through sub-menus, and press key to select and confirm the desired function.
   – Press  or to select one option, and press to confirm settings and exit from the current menu.

3. Press E to exit from the menu screen

• Functions of the monitor vary with models, and the functions in this manual are for reference only.

Refresh Rate

| O /On
Position: Top Right/Top Left/Bottom  Right/Bottom Left
Game Crosshair| O
On: Crosshair 1/Crosshair 2/Crosshair 3/Crosshair 4/Crosshair 5/Crosshair 6
Game Time| O
On: 15:00/30:00/45:00/60:00
Dynamic Brightness| O /Normal/Expert/Elaboration
|
MPRT| O /On
Ambient Lighting| O /On
Picture Settings| Brightness| 0-100
Contrast| 0-100
DCR| O /On
Contextual Model| O
On：Movie Mode/Reading Mode/Night Mode
Low Blue Light| 0-100
Sharpness| 0-5
Gamma| 1.8/2.0/2.2/2.4/2.6/ S.curve
Aspect Ratio| Wide Screen/4:3/1:1/Auto
Color Settings| Warm| O /On
Natural| O /On
Cool| O /On
User1| O /On
User2| O /On
User3| O /On
Hue| R/G/B/C/M/Y: 0-100
Saturation| R/G/B/C/M/Y: 0-100
PIP/PBP| PIP/PBP mode| O /PIP Mode/PBP 2Win 1:1
Sub-Signal  Source| DP1/DP2/HDMI1/HDMI2
Audio Source| Auto/DP1/DP2/HDMI1/HDMI2
PIP Position| Top Right/Top Left/Bottom  Right/Bottom  Left
PIP Size| Small/Medium/Large
Window Swap| O /On
OSD Settings| Language| 简体中文/English/한국어 /Portugues do Brasilazil/Deutsch/Nederland/Suomi/Français/ Ελληνικά/Indonesia/Italiano/日本語/Malaysia/ Polskie/Português/P     /Españo/ไทย /Tiếng Việt/繁体中文/Türkçe
OSD Time Out| 5-60
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Transparency| 0-5
Hotkey1 Setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
Hotkey2 Setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
Hotkey3 Setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/ Dynamic Brightness
OSD Lock| O /On
Other Settings| Input Signal| Auto/DP1/DP2/HDMI1/HDMI2
Volume| 0-100
Mute| O /On
Auto Power| O /On
Eyeshield Remind| O /On
Reset| No/Yes
Information| Input Source/Resolution/Mode

Basic parameters

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product.
Product dimensions| Without stand| 712.5×422.8×120.6mm
With stand| 712.5×508.5×245.1mm
Tilting angle| Forward tilting-5°±2.0° ; Backward tilting15°±2.0°
Height range| N/A
Rotation angle| N/A
Environmental conditions| Action| Temperature: 0°C~ 40°C (32°F ~ 104°F) Humidity: 10%~90% RH (non-condensing)
Storage| Temperature: -20°~ 60° (-4°F ~ 140°F) Humidity: 5%~95% RH (non- condensing)

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

“This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>