ANKER VR P10 Wireless Earbuds User Guide
- June 4, 2024
- Anker
Table of Contents
ANKER VR P10 Wireless Earbuds
APP
Download the Soundcore app to enhance your experience (firmware update, dongle switching, EQ tuning, gaming mode, and more).
PAIRING VIA DONGLE
When the dongle is
plugged into the USB-C port of your VR headset or gaming console, the earbuds
will automatically connect with it and be ready to use. *Use the USB-C to USB
adapter if necessary.
BLUETOOTH PAIRING
Open the charging case, then press and hold the button on the charging case for 3 seconds to enter Bluetooth pairing mode. Select “Soundcore VR P10” from your device’s Bluetooth menu to connect. *During Bluetooth pairing, the connection between the earbuds and the dongle might break temporarily. The connection of dongle will resume when the Bluetooth pairing succeeds or when you return the earbuds in the charging case, then close and open the case.
DUAL CONNECTION
The earbuds can connect with two devices (via dongle or Bluetooth) at the same time.
You can only play music from one device at a time. If you have an incoming call on the Bluetooth device, the volume on the dongleconnected device will be lower than that on the Bluetooth device.
CONTROLS
- x2: Tap twice
- 2s: Press and hold for 2 seconds
- In the Soundcore app, you can customize the controls, e.g. enable a single tap to adjust volume.
- Controls may vary when connected via the dongle if the console’s system is incompatible.
PLAYING WHILE CHARGING
You need a charger that supports USB PD (Power Delivery) and has a minimum output of 5V/2A or 9V/2A, otherwise this function might not work properly. *No data transmission is supported. Don’t try to link a PC to a VR headset using a USB-C cable.
SUPPORT
Please visit www.soundcore.com/support for more information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>