ECOFLOW Blade Portable Power Station Instruction Manual

June 9, 2024
ECOFLOW

ECOFLOW Blade Portable Power Station

Disclaimer

Thanks for purchasing ECOFLOW BLADE (hereinafter referred to as “the mower”). This is a battery-powered automatic robotic lawn mower, which is specially designed for mowing. Any other usages not clearly approved in this user manual may damage the automatic lawn mower and could result in serious consequence or danger to the user.
In order to properly use the product, please carefully read the user manual before using the product. You can reduce the risk by following the instructions and warnings in this manual, but you cannot completely eliminate the risk. Always wear long trousers and work shoes to protect yourself. After reading, please keep the document for future reference. If you do not operate this product correctly, you could cause serious injury to yourself or others, or result in product damage and property damage. Once you use this product, you are deemed to have understood, recognized and accepted all terms and contents of this document. The user undertakes to be responsible for his own actions and all consequences arising therefrom. EcoFlow is not responsible for any loss caused by the user’s failure to use the product in accordance with the user manual.
In compliance with laws and regulations, EcoFlow reserves the right of final interpretation of this document and all related documents of this product. Subject to update, revision or termination without prior notice, please visit the EcoFlow official website for the latest product information.

Symbols and Decals

  • WARNING -Read instruction manual before operating the machine.
  • WARNING- Do not ride on the machine.
  • WARNING- Keep a safe distance from the machine when operating.
  • Keep hands and feet away from the rotating blades.
  • WARNING – Remove the disabling device before working on or lifting the machine (The disabling device means battery pack)
  • Make sure the battery is removed before working on or lifting the machine.
  • WARNING -It is not permitted to dispose of this product as normal household waste. Ensure that the product is recycled in accordance with local legal requirements.
  • This product conforms to the applicable EC Directives.
  • Class II appliance
  • Class III appliance
  • SMPS incorporating a short-circuit-proof safety isolating transformer (inherently or non-inherently)
  • SMPS (Switch mode power supply unit)
  • Efficiency Level
  • Direct current
  • Alternating current
  • CLASS 1 LASER PRODUCT. Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 Ed.3., as described in Laser Notice No.56, dated May 8, 2019.

Safety Warnings

Before mowing

  1. Please read and follow the instructions & warnings carefully in user manual before operating the mower.
  2. The operator is responsible for accidents or hazards occurring to other people on their property.
  3. Please regularly inspect the area where the mower is used and remove all the obstacles.
  4. DO NOT use the mower if any part of it is damaged, worn or inoperable.
  5. DO NOT modify the mower by yourself, please contact after-sales service of EcoFlow if necessary.
  6. Please be careful of all the potential hazards that are hidden in the grass.
  7. Use the mower in daylight or good artificial light.
  8. DO NOT operate the mower in bad weather, such as thunderstorm or snow.
  9. Use a residual-current device (RCD) with a tripping current of maximum 30 mA when you connect the power supply to the power outlet.
  10. To achieve better mowing results and prolong its service life, please be sure to keep the mower clean and the blades in good condition. Inspection and maintenance should be carried out by an adult every week. Any damaged or worn parts should be replaced. DO NOT perform maintenance when wearing open sandals or barefoot. Always wear long trousers and work shoes when maintaining the mower.
  11. We recommend that you replace the blades every quarter depending on their condition. Replace all the three blades and screws at the same time for further use. Only use the right type of screws and original blades as approved by EcoFlow. When replacing the blade, make sure that the mower is completely stopped running and remove the battery temporarily. We recommend that you wear heavy work gloves in case of sharp blades.
  12. Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine. Local regulations may restrict the age of the operator.
  13. WARNING: For the purposes of recharging the battery,only use the detachable supply unit KT180A3600500XX provided with this appliance.
  14. For the European Union: use only with the KT180A3600500EU supply unit. For the United Kingdom: use only with the KT180A3600500BS supply unit. For the North America: use only with KT180A3600500US supply unit. For Australia: use only with the KT180A3600500AU supply unit.

When mowing

  1. DO NOT lift up the mower while it is in use.
  2. DO NOT allow children to get close to or play with the mower when it is in use.
  3. DO NOT touch the rotating blades! Do not put hands or feet under or near the rotating parts.
  4. If accident or breakdown happens when the mower is running, please press STOP button immediately.
  5. During the manual control, do not overextend it and maintain balance at all times. Secure footing when it is walking on slopes. Always wear long trousers and work shoes.
  6. Do not run while operating the mower or its peripherals.
  7. If there are abnormal vibrations, please turn off the mower, place it on level ground for about 30 seconds and then restart. If the issue persists, please contact authorized after-sales service.
  8. Please make sure the mower has completely stopped and the battery has been removed before you clean, repair or inspect it.
  9. If the machine is not used for a long time, remove the battery. Store the machine indoors in a cool and dry place.

Warning:

  1. When mowing on a public lawn, please put up a warning sign around the working area that says: Warning! Automatic mower! Keep away from the machine! Supervise children!
  2. DO NOT use the product or its peripherals with defective guards/shields, or without safety devices, or if the cord is damaged or worn.
  3. If the cord on the power supply or the extension cable becomes damaged or entangled during use, disconnect the power supply from the power socket and then untangle. To avoid a hazard, pull the body of the plug rather than the cord when separating the power supply from the power socket. Contact after-sales service and have a professional technician to repair or replace the cord if necessary.
  4. DO NOT modify or dismantle the battery by yourself. Please contact after-sales service or a professional technician for help if necessary.
  5. The battery pack contains electrolytes. If the electrolyte leakage comes into contact with your skin, wash off with soap and water immediately. Get medical help in case of eye contact and immediately flush the eyes with plenty of water for at least 15 minutes without rubbing.

Disposal

  1. When possible, please fully discharge the battery of this product before placing the product in the designated battery recycling bin. This product contains batteries. Batteries are dangerous chemicals and should not be disposed of in ordinary trash bins. For details, please follow your local laws and regulations about battery recycling and disposal.
  2. If the battery cannot be fully discharged due to product failure, do not dispose of battery directly in the battery recycling bin. Please contact a professional battery recycling company for further processing.
  3. The battery will not be able to start after over-discharge. Please dispose of it properly.

Information on Disposal for Users of Waste Electrical & Electronic Equipment
This symbol on the product or on its packaging indicates that used electrical and electronic products should not be mixed with unsorted municipal waste. For proper treatment, it is your responsibility to dispose of your waste equipment by arranging to return it to designated collection points. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, which is free of charge, please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

This symbol means that batteries and accumulators, at their end-of-life, should not be mixed with unsorted municipal waste. Your participation is an important part of the effort to minimize the impact of batteries and accumulators on the environment and on human health. For proper recycling you can return this product or the batteries or accumulators it contains to your supplier or to a designated collection point, which is free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. there are separate collection systems for used batteries and accumulators. Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling center.

Specifications

Basic Information

Name| ECOFLOW BLADE
Brand| EcoFlow
Model| EFH100
Dimensions (mower)| Approx. 669452312 mm (26 × 18 × 12 in)
Dimensions (charging station)| Approx. 715501205 mm (28 × 20 × 8 in)
Weight| 16.5 kg (36.4 lbs)
Material| Plastic and aluminium alloy
Mowing Parameter
Working area| Max. 3,000 ㎡ (0.75 acres)
Typical mowing time per full charge| ≥120 mins
Cutting width| 26 cm (10.2 in)
Cutting height| 20~76mm (0.8-3 in)
Charging duration| Approximately 2 hours
GNSS working mode| GPS, Beidou, Galileo, GLONASS
Noise Emission

 | Silent mode| Dynamic mode
Measured Sound Power Level LWA| 59 dB(A)| 65 dB(A)
Sound Power Uncertainties KWA| 3 dB(A)| 3 dB(A)
Sound pressure Level LpA| 51 dB(A)| 57 dB(A)
Sound pressure Uncertainties KpA| 3 dB(A)| 3 dB(A)
Working Conditions
Discharging temperature| 0°C-60°C (32°F-140°F)
Storage temperature| -20°C-60°C (-4°F-140°F)
Charging temperature| 0°C-45°C (32°F-113°F)
IP rating| IPX5|
Max. incline| 50% (27°)|
Connectivity
Bluetooth frequency range| 2,400~2,483.5MHz
Wi-Fi frequency range| 2,400~2,483.5MHz/5,100~5,850MHz



Cellular network

| Europe:

LTE-FDD: B1/B3/B7/B8/B20/B28

North America:

WCDMA: B2/B4/B5

LTE-FDD: B2/B4/B5/B12/B13/B25/B26

Deck Parameter


Rated speed

| Silent mode: 0.4 m/s (1.3 ft/s)

Normal mode: 0.6 m/s (2 ft/s)

Dynamic mode: 0.8 m/s (2.6 ft/s)

Max. speed| 0.8 m/s (2.6 ft/s)|
Drive mode| Direct-drive hub motor
Blade Motor
Rated speed| 2,800 rpm|
Max. speed| 3,000 rpm|
Motor type| Brushless motor|
Battery

Battery type| Lithium-ion battery
Rated voltage| 21.6V
Rated capacity| 298Wh


Protection system

| Overheat protection, short circuit protection, over-current protection, over-voltage protection,

and undervoltage protection

Charging Station
Input voltage| 36 V
Input current| 5 A
Output voltage| Max. 25.2 V DC
Output current| Max. 7A
Other Features
Front wheel| 200 mm omni-wheel
Rear wheel| Hub motor with rubber tyres
Sensor| IMU sensor, Lift sensor, rain sensor, wheel

encoder, RGB-D camera

Vertical obstacle crossing ability| 40 mm

  1. The noise emission declarations conform to EN 50636-2-107 and ANSI/OPEI 60335-2-107.
  2. The manufacturer reserves the right to make modifications without notice, please go to www.ecoflow.com for the latest manuals and EU Declaration of Conformity.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Note: 5150~5250MHz is Indoor use only.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals