AINAVI SYFT7210 Car Stereo Wireless Highlander Radio Installation Guide

AINAVI SYFT7210 Car Stereo Wireless Highlander Radio

Product Information

Specifications:

• Product Name: SYFT7210 Highlander Radio
• Manufacturer: ViaBecs
• Supports: Factory backup camera, JBL AMP, Factory USB, and SWC
• Factory Setting Password: 123456
• Reset Factory Password: 7890

Product Usage Instructions

Installation Video
Follow the video guide for step-by-step installation instructions: Installation Video

Check Your Factory Radio
Ensure you check your factory radio before proceeding with the installation.

Connect CAN004-X harness with factory harness

Note: Some factory functions may be lost after removing the factory radio. Use the provided wiring harness to support factory features like backup camera, JBL AMP, Factory USB, and SWC.

Follow the steps in the manual to connect the harness properly.

Radio Wiring Diagram
Refer to the wiring diagram provided to connect aftermarket backup camera and set camera format correctly.

TS10 Head Unit FAQs

• Q1: What is the Factory Setting Password?A: The password is 123456
• Q2: What is the Reset factory Password?A: The password is 7890
• Q3: How to change the KPH to MPH?A: Follow the steps in the Theme app to change speed unit.
• Q4: How do I update the ViaBecs TS10 software?A: Connect to home wifi and follow the steps to update the system and MCU online.
• Q5: How to activate Tlink for Apple CarPlay & Android Auto? A: Connect wifi to activate Tlink and follow the provided instructions.

Frequently Asked Questions (FAQ):

Q: How do I update the software of SYFT7210 Highlander Radio?
A: To update the software, connect your device to your home wifi and navigate to the car settings app. Look for ‘Detection Update’ to perform the software update.

Q: What should I do if my backup camera image is black when I put the car in reverse?
A: Confirm the resolution of your camera. If it’s not HD, choose normal – SD – NTSC/PAL. For HD cameras, select normal – HD – AHD 720P/25fps or AHD 1080P/25fps. Test the camera after changing the format.

Q: How do I activate Tlink for Apple CarPlay & Android Auto?
A: Connect to wifi to activate Tlink. Access the Quick Setting Menu, turn on wifi, and connect your phone hotspot first. Make sure to clear Tlink usage record before use.

Installation Video

STEP 1: How to install the ViaBecs Highlander radio.
https://www.youtube.com/watch?v=pQ8s45cqUWM

Check Your Factory Radio

Model Number: SYFT7210
Model A:
2014-2019 Toyota Highlander
Compatibility with Original functionality: with JBL Amplifier,with backup camera or 360 camera, A/C info,
USB Cable, TPMS info.
Proper Wiring Harness: CAN004-X (No included)
Note: The No.5 & 6 port is the Camera Connector. Only connect one of them.

Connect CAN004-X harness with factory harness

Note: don’t need to connect all factory connector. Some functions will lost after you removed the factory radio.

But our wiring harness can support factory backup camera, JBL AMP, Factory USB and SWC etc.

CAN004-X-SW

1. Canbus box
2. Red: Male AUX R OUT to Female AUX R IN
3. White: Male AUX L OUT to Female AUX L IN
4. Male rear camera (16PIN)
5. Male rear camera (24PIN)
6. 10PIN CAM VIN & Wifi Line
7. 8PIN Canbus Port
8. 4PIN USB adapter
9. FM/AM Radio Antenna

Note: You need to connect one of No.4 or No.5 male rear camera lines.

STEP 1: How to connect factory backup camera S1: You need to connect the yellow male camera RCA of No.8 Or No.11 CAMERA Connector CAN004-X）with the PIN10 Rear CAM VIN.

Note: It is a Nissan Wiring harness in the picture. It is as a reference.

STEP 2: Set up the options for Canbus

• Sl: connect the head unit with your Phone hotspot or wifi first.
  Press Car Settings — Factory — Select Models – password is 123456 – Model choose.

• S2: Choose CanBox Brand: 03 :Simple Soft – 30:Toyota– 14:Models: All New Highlander – Config:

Public
Finally, press ok to save the settings. Then the head unit will update it automatically.
Here is the video as a reference.

Video: Set up canbus option on TS10 Radio

https://www.youtube.com/watch?v=PKbGqFFcCAc&t=51s

Radio Wiring Diagram

Device Ports

STEP 1: How to connect aftermarket backup camera video: How to wire a Backup Camera
https://www.youtube.com/watch?v=NBKY6S4d5QY

STEP 2: Set Camera Format

Problem: Why my backup camera image is black when I put the car in reverse?
Please confirm the resolution of your camera first.

1. If your camera is not HD, please choose normal — SD — NTSC/PAL.
2. if your camera is HD version, please choose the normal — HD — AHD 720P/25fps, or AHD 1080P/25fps.
   Then test the camera again after you change the camera format.

TS10 Head Unit FAQs

Q1: What is the Factory Setting Password?
The password is: 123456

Q2: What is the Reset factory?
The password is: 7890
Q3: How to change the KPH to MPH?
Please click Theme app — Setting — Plugin –Speed Unit

You can change to KPH to MPH
How To Change Car Launcher Theme In ViaBecs Car Stereo Video: https://www.youtube.com/watch?v=HXSWJOeRbew

Q4: How do i update the ViaBecs TS10 software?
You can update the system and MCU online.
Please connect your home wifi first and then open the car setting app — about — Detection Update.
Video: https://www.youtube.com/watch?v=0BABIjvTllw

Q5: How to activate Tlink for Apple car play & Android Auto?
How to Connect and Use Wireless Apple Carplay on ViaBecs TS10 Radio Video: https://www.youtube.com/watch?v=gizPQ1wS7aA

S1. You need to connect wifi to activate Tlink when you use it at the first.
How to find the wifi.
Please drop down Quick Setting Menu.
And then a long-press wifi icon to turn on it. and then you can try to connect your phone hotspot first.

Note: Please clear the Tlink usage record first.

S2. if Tlink still asks you to put the auth_key, please take a clear photo of the QR activating code and then send me and then my engineer will activate it after scanning the code.

1. Please click “About” on the Tlink app

2. Choose the first option (Wireless Carplay + Wireless Android Auto + Wired Android Auto)
   Then click the “refresh” to get the new QR code

3. Take a photo and send it to me
   Note: the code will be invalid if the time is too long. and then our engineer will scan the QR code to activate it.

Q6: How To Change Boot Logo On ViaBecs Android Head unit Car Stereo?
Video: https://www.youtube.com/watch?v=izVcfczZK7U

Q7: How to remap panel button on ViaBecs car stereo?
Video: https://www.youtube.com/watch?v=V05wCEH2NRU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>