HAMPTON BAY SB30 Sink Base Cabinet and ADA Base Cabinet User Guide

HAMPTON BAY SB30 Sink Base Cabinet and ADA Base Cabinet

Product Information

Specifications

• Models: SB30, SB36, VSB24, VSB30, VSB36, SB30-G, SB36-G, VSB24-G, VSB30-G, VSB36-G, ADA-SB36, SB33
• Item Numbers: 1006596139, 1006596130, 1006867788, 1006867920, 1006867826, 1007256872, 1007256888, 1007256894, 1007256914, 1007256908, 1010065867, 1009821253
• Type: Sink Base and ADA Base Cabinet
• Brand: Hampton Bay
• Customer Service: 1-855-HD-HAMPTON
• Website: HAMPTONBAY.COM

Product Usage Instructions

Safety Information
Please read and understand all instructions before starting the assembly process. Ensure a safe environment for assembly.

Pre-Assembly
Before you begin assembling the cabinet, make sure to:

• Check all parts against the Hardware Included and Package Contents sections.
• If any part is missing or damaged, do not proceed with assembly. Contact Customer Service.
• Assemble the cabinet on a soft surface like carpet or the cardboard container included.

Tools Required
The following tools are required for assembly:

• Screwdriver
• Hammer
• Tape measure
• Level

Cabinet Assembly
Follow the step-by-step instructions provided in the manual for cabinet assembly. Ensure all parts are securely attached.

Cabinet Assembly for Top Part of ADA Base
Specific instructions for assembling the top part of the ADA Base cabinet are detailed in the manual. Follow these instructions carefully.

Care and Cleaning
To maintain your Sink Base and ADA Base Cabinet:

• Regularly clean with a mild detergent and water solution.
• Avoid using abrasive cleaners that may damage the surface.
• Wipe dry with a clean cloth to prevent water damage.

FAQ

• Q: What should I do if a part is missing or damaged?
  A: Contact Hampton Bay Customer Service at 1-855-HD-HAMPTON for assistance with missing or damaged parts.

• Q: How can I ensure proper ventilation during assembly?
  A: Assemble the cabinet in a well-ventilated area to reduce exposure to any fumes from the materials used.

USE AND CARE GUIDE

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this [PRODUCT]. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
INTERNAL USE

Safety Information

Please read and understand these instructions before you begin this assembly.

CALIFORNA RESIDENTS

WARNING: This product can expose you to chemicals including Formaldehyde (GAS), which is [are] known to the State of California to cause cancer. For more information go to WWW.P65Warnings.ca.gov/products.

MINNESOTA RESIDENTS
IMPORTANT HEALTH NOTICE
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE BUILDING MATERIALS) EMIT FORMADEHYDE. EYE, NOSE, AND THROAT IRRITATION, HEADACHE, NAUSEA AND A VARIETY OF ASTHMA-LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A HISTORY OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG- TERM EFFECTS OF EXPOSURE TO FORMADEHYDE.
REDUCE VENTILATION MAY ALLOW FORMADEHYDE AND OTHER CONTAMINANTS TO ACCUMULATE IN THE INDOOR AIR. HIGH INDOOR TEMPERTURES AND HUMIDITY RAISE FORMALDEHYDE LEVELS. WHEN A HOME IS TO BE LOCATED IN AREAS SUBJECT TO EXTREME SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE USED TO CONTROL INDOOR TEMPERATURE LEVELS. OTHER MEANS OF CONTROLLED MECHANICAL VENTILATION CAN BE USED TO REDUCE LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR CONTAMINANTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS OF FORMADEHYDE, CONSULT YOUR DOCTOR OR LOCAL HEALTH DEPARTMENT.

Warranty

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.

Pre-Assembly

BEFORE YOU BEGIN
Compare all parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not assemble this product. Contact Customer Service.
Assemble the cabinet on a soft surface such as carpet or the cardboard container of this product.

TOOLS REQUIRED

HARDWARE INCLUDED

Hardware list for Bottom Cabinet

• Extras quantity is based upon your cabinet size.

Hardware list for Top Cabinet

• Extras quantity is based upon your cabinet size.

Pre-Assembly

PACKAGE CONTENTS

Bottom Cabinet

Top Cabinet

Cabinet Assembly

1. Attaching the posts to the panels
   Align 4 posts (AA) with pre-drilled holes on each of the panels and frame (A – B – C) and secure with 4 screws (BB) on each panel and frame (A – B – C).

2. Attaching the side panels into the face frame
   Start by placing the face frame (C) flat on a smooth surface that will not scratch or damage the face of the cabinet, such as a towel or piece of cardboard (1) from the packaging. Slide the two side panels (B) into the mating grooves on the face frame (C).

3. Attaching the bottom panel

   • Slide the bottom (D) panels into grooves in the sides.
   • Snap 4 corner locks (CC) over the posts to secure the face frame (C) and side panels (B) as shown (two corner locks (CC) on the bottom and two on the top).

4. Attaching the back panel
   Install the back panel (A) and attach the 4 remaining corner locks (CC), as shown. NOTE : If installing on a laminate countertop, orient the top corner locks (CC) in the opposite direction. Bottom corner lock assembly
   will be the same for all countertop types.

   • If installing a laminate countertop, the top four corner locks (CC) should be oriented as shown below. From inside of the cabinet, screw through the corner locks (CC) into the bottom of the countertop to secure into place.
   • For all other countertop types, the top four corner locks (CC) should look like this.

5. Securing the bottom corner locks
   Insert screws (BB) through the holes in the bottom four corner locks (CC), and screw into the bottom panel (D).

6. Attaching the toe kick

   • Slide the toe kick (E) into the grooves of the side panels (B) so that it sits flush with the bottom of the cabinet.
   • Insert two screws (BB) into the pocket holes to secure the toe kick (E) to the sides.

7. Securing the back and side panels
   Insert 4 screws (BB) into countersunk holes in the back (A) and side panels (B).

8. Attaching silicone pads
   Peel and stick two silicone pads (DD) onto the inside corners of each door.

9. (OPTIONAL) Adjusting the door

   • Door hinges are 6-way adjustable.

   • Up or down adjustment – Loosen screw 1, align the door, and tighten screw 1.
     NOTE : It is critical that you do NOT overtighten screw 1.

   • Left or right adjustment – Turn screw 2 clockwise or counterclockwise.

   • In or out adjustment – Turn screw 3 clockwise or counterclockwise.

Cabinet Assembly for Top Part of ADA Base

1. Attaching the posts to the panels
   Align 4 posts (AA) with pre-drilled holes on each of the panels and frame (F – G – H) and secure with 4 screws (BB) on each panel and frame (F – G – H).

2. Attaching the side panels into the face frame

   • Start by placing the front frame (H) flat on a smooth surface that will not scratch or damage the face of the cabinet, such as a towel or piece of cardboard (1) from the packaging. Slide the two side panels (G) into the mating grooves on the face frame (H).
   • Snap four corner locks (CC) over the posts to secure the front frame (H) and side panels (G) as shown. At the top and bottom of the Top Part, the smooth face of each corner lock (CC) should be facing out.

3. Attaching the back panel

   • Assemble the back panel (F) and the four remaining corner locks (CC)
   • Insert two more screws (BB) into the countersunk holes on each side. Fully tighten all screws.

4. Installing the Top Part
   Assemble the Top with Bottom Part then insert screws (FF) through each hole in the metal plates (EE) into the pre-drill holes on the left/right panels and front/face frame.

Care and Cleaning

• For normal spills, a damp cloth is sufficient. Dry the surface immediately.
• Doors can be cleaned with most general purpose household cleaners.
• Do not use caustic agents and/or abrasive scrubbers, or oven cleaners.
• Cabinets can be cleaned with a damp sponge or cloth using soapy water, or most general purpose household cleaners. Do not use any abrasive cleaner or scrubbers.
• Do not allow liquids to remain on the surfaces for long periods of time.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

References

• Hampton Bay - The Home Depot
• P65Warnings.ca.gov/products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>