vlectro OP-013151 ANC Headset Instruction Manual

: May 15, 2024
: Vlectro

Table of Contents

vlectro OP-013151 ANC Headset
Product Information
Product Usage Instructions
Product and Accessories
Bluetooth Headphone power on/off
Specifications
Warnings and cautions
DECLARATION OF CONFORMITY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vlectro OP-013151 ANC Headset

Product Information

Specifications:

Bluetooth version: V5.3
Headphone battery: 500mAh
Playback time: 50H (50% volume) / 44H (50% volume with ANC ON)

Product Usage Instructions

Bluetooth Headphone On/Off:

To turn on: Press and hold the Multifunction Button (MFB) to power on.
To turn off: Press and hold the MFB to power off.

Connecting to Two Devices:
Ensure Bluetooth is on for both devices. Follow pairing instructions to connect to both devices.

Playing Music:

Play/Pause: Short press the MFB
Previous track: Hold “-” to go to the previous track
Next track: Hold “+” to go to the next track
Adjust volume: Short press “+” or “-” to increase or decrease volume

ANC Mode:
Toggle ANC mode by short pressing the Mode button.

Wired Mode:
Use the included 3.5mm audio cable to connect for wired use. Note that some functions are disabled in this mode.

Answering Calls:
Answer incoming calls by short pressing the MFB.

Recharge Headphone:

Use the provided charger for the non-removable battery.
Fully charge before first use.
LED indicator turns red when charging and constant blue when fully charged.

FAQ:

Q: How do I know if the headphones are fully charged?
A: The LED indicator will be constant blue when the headphones are fully charged.
Q: Can I use the headphones while they are charging?
A: Yes, you can use the headphones while they are charging for convenience.

Product and Accessories

Headphone x 1
3.5mm audio cable x 1
Type-C Charging Cable x1

vlectro-OP-013151-ANC-Headset-FIG-1

Mode button
Volume –
Volume +
Multi-function button(MFB)
AUX
LED indicator
Charging port
Charging indicator

vlectro-OP-013151-ANC-Headset-FIG-2

Bluetooth Headphone power on/off

Power on: Long press the MFB to turn on
Power off: Long press the MFB to turn off

Bluetooth connection
Follow the steps below (please make sure your phone has built-in Bluetooth)

While the LED indicator is flashing alternately in blue and red, the headphones are in pairing mode. (Note: The headphones may automatically enter pairing status after power on if no connection is made. reconnected. This is because the headphones can automatically reconnect to the last device you paired with. To reconnect, simply turn them on again).
Activate the Bluetooth function and search for “Vlectro ANC headset ” by following the instructions on your phone, then click on ” Vlectro ANC headset ” to connect.

Dual devices connection
Ensure two devices’s bluetooth open.

Enable A devices’s Bluetooth pairing function and search for the ” Vlectro ANC headset “to pair and connect, and disconnect Bluetooth connection after successful connection. (Don’t delete the pairing name in your device)
Connect the headphones to the B device, then turn on the Bluetooth pairing function of the A device to connect the headphones.

Music playing

Play/pause: Briefly press the MFB
PREV: Press and hold “-” to skip to the previous track.
NEXT: Press and hold “+” to skip to the next song.
VOL +: Short press “+” to increase volume
VOL – : Short press “-” to decrease the volume (Note: Some mobile phones don’t synchronise the volume with the headphones by default, so please check the instructions of your mobile phone and the settings on your phone).

ANC mode Switching
Short press the Mode button to switch on/off ANC Mode.

Wired mode

Dual 3.5mm Audio Cable connecting To Audio 1. Plug and play: Connecting the headphone to a music player with the provided dual 3.5mm audio cable, the headphone can be used as wired headphone without starting.
In this mode, you can’t use any function of the headphone, including play/pause music, volume adjustment, microphone and so on.

Answering incoming calls
Short press the MFB to answer incoming calls.
( Note : Some mobile phones are set to answer calls through their own handset by default, so please check your phone’s instructions and the settings on your phone. )

End the current call
Short press the MFB to end the current call.
Reject incoming calls
Lone press the MFB to reject a incoming call.
Last number redial
Double press the MFB to redial the last number called.

To charge the headphones

As the product has a built-in, non-removable and rechargeable battery, please use the supplied charger.
Fully charge the product before first use;
The LED will turn red while charging. When fully charged, the LED indicator will be a steady blue.

Notes

Please select the charger certified by the original manufacturer.
Battery performance may deteriorate with repeated charging and use of the product. This is normal with all rechargeable batteries.

Specifications

Bluetooth Version: V5.3
Headphone battery: 500mAh
Playing time: 50H(50% vol)/ 44H(50% vol with ANC ON)
Charging time: 2.5H
Speaker size: φ40mm ––
Active noise cancellation level: -20±3dB
Input voltage/current: 5V/1A

Warnings and cautions

Please follow the operating instructions.
Please charge the headphone with an input power lower than 5V/1A to protect the battery;
Please store or use the headphone in a normal temperature environment.
Please keep the headphones away from heat sources such as radiators, heat registers, stoves or other heat generating devices. As it is not anti-high temperature.
Don’t block the ports of the headphone, such as the charger port, LED port and microphone, etc.
To protect your hearing and prolong the life of the headphones, it is not recommended to keep the volume at maximum for a long time.