ipega PG-XBX026A PWM Cooling Fan Instruction Manual

ipega PG-XBX026A PWM Cooling Fan

Function Illustration

Electrical parameters

1. Working Voltage: DC 5V
2. Working Current: Fan ≤ 500 mA
3. Applicable platform: XBX console

Usage instructions

1. This product is suitable for cooling the XBX console
2. Temperature detection functionality and can intelligently adjust the cooling fan speed based on the temperature changes of the console in automatic mode. The cooling fan can also be manually adjusted to operate at three different speeds using the fan switch.
3. Headphone holder for convenient storage of headphones.
4. With RGB light effect, equipped with a light control switch that can toggle the fan’s colorful lighting effects on and off.

Usage instructions

1. Align the fan with the holes on the top of the XBX console and insert it. Then insert the headphone hook into the two groove slots on the fan, as shown in the figure above (Figure 1).

2. Plug the USB power cable of the fan into the USB port on the XBX console, as shown in the figure above (Figure 2).

3. Turn on the XBX console, and the four central LED lights on the top fan will light up, creating a colorful background lighting effect. After 8 seconds, it will automatically enter the default intelligent temperature control mode, indicated by a steady green light for AUTO.

4. The “Fan Speed Switch” button can control the fan between different modes: intelligent temperature control mode (AUTO), 1st gear (1300±10% RPM), 2nd gear (1500±10% RPM), 3rd gear (1800±10% RPM), and Off. It also has a fan speed memory function. Press and hold the button for 3 seconds to turn off the fan, and press it again to restore the fan speed to the previous setting.

5. When the fan is in “Intelligent Temperature Control Mode” (AUTO), the fan speed depends on the temperature detected by the temperature sensor inside the fan that is in contact with the console. The higher the temperature, the faster the fan speed (up to a maximum of 1800±10% RPM). When entering the “Intelligent Temperature Control Mode,” the fan will rotate for 5 seconds regardless of the temperature, and then it will automatically adjust the fan speed based on the temperature: below 38 degrees Celsius, the fan will not rotate; around 38 degrees Celsius: 1300±10% RPM; around 40 degrees Celsius: 1500±10% RPM; above 42 degrees Celsius: 1800±10% RPM.

6. The USB expansion port on the top fan supports USB 2.0 data transmission and provides a current output of 500mA, which can be used for charging the XBX controller while playing.

7. This product is equipped with a light control switch that can toggle the fan’s colorful lighting effects on and off.

Note:

1. Please do not store this product in wet or high-temperature areas.
2. Don’t knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage to the product.
3. Non professional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service.
4. This product contains electronic components such as capacitors and should not be casually discarded. Please dispose of it properly by giving it to qualified recycling facilities.
5. In the event that some products cannot be connected or operated due to uncontrollable factors, our company accepts no responsibility. Our company reserves the right to make the final interpretation in such cases.
6. This product does not have short circuit protection, overvoltage protection, or overcurrent protection. Please do not use it to charge batteries or controllers of other models.

Product list

• Fan component x 1

• Headphone holder x 1

• Manual x 1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>