Jiunai S23 Galaxy Ultra Case Instruction Manual

Jiunai S23 Galaxy Ultra Case

Product Specifications

• Product Name: Armor Case
• Material : Hard Shell, Rubber Layer
• Features: Anti-Dust Plug, Front and Back Shell
• Compatibility: Compatible with various cell phone models

Product Usage Instructions

Removing the Case

1. Grab the Anti-Dust Plug and pull out the Rubber Layer.
2. Take off the Rubber Layer.
3. Split the front shell and back shell by opening the slot on each side.
4. Lift the front and back shell carefully.
5. Take your cell phone out of the Hard Shell.

You can also refer to the image below for visual guidance on removing the case.

Confirming Phone Model Before Purchase:

If you are worried about ordering the wrong case, follow these steps to confirm your phone model:

• For IOS Phone: Go to Settings >> General >> About >> Model Name.
• For Android Phone: Go to Settings >> About Phone >> Product Name.

If you still have any further questions about the phone case, please feel free to reach out to us, and we will provide a solution within 24 hours.

FAQ:

• Q: Is the Armor Case compatible with all cell phone models?
• A: The Armor Case is designed to be compatible with various cellphone models. However, it is recommended to confirm your phone model before purchase.
• Q: How can I clean the Armor Case?
• A: You can clean the Armor Case by gently wiping it with a damp cloth. Avoid using harsh chemicals or abrasive materials.

installation instruction

This manual is applicable to all the Strong Armor Cases from Jiunai US. Please follow these steps to install the case:

• Step 1 : Grab the Anti-Dust Plug and pull out the Rubber Layer.
• Step 2 : Take off the Rubber Layer.
• Step 3: Split the front shell and back shell by opening the slot on each side.
• Step 4: Lift the front and back shells carefully
• Step 5: Put your cell phone in the Hard Shell
• Step 6: Make sure every slot on the hard shell is snapped on.
• Step 7: Put the Rubber Layer back on the hard shell.
• Step 8 : Press the edges of it and make sure it’s matched with the hard shell

To remove the case

• Step 1 : Grab the Anti-Dust Plug and pull out the Rubber Layer.
• Step 2: Take off the Rubber Layer.
• Step 3: Split the front shell and back shell by opening the slot on the each side.
• Step 4: Lift the front and back shells carefully
• Step 5 : Take your cell phone out of the Hard Shell

You can also follow the steps in image below:

How to Install

Worry about ordering the wrong case? You can follow the steps below to confirm the phone model before purchase: For IOS Phone:

Go to Settings >> General >> About >> Model Name

How to Check the Mv Phone Model Before Ordering?

1. Click “Settings” on your iPhone
2. Click “General”
3. Click “About”
4. You will see the phone model on “Model Name”

For Android Phone:
Go to Settings >> About Phone >> Product Name

Go to ‘Settings’. Tap on ‘About Phone’. You’ll see your model name next to ‘Device name’ or ‘Model name’. If you’ve changed your Device name, then use the ‘Model number’ to find your Model name using a web search or by visiting the manufacturer’s website.

If you still have any further questions about the phone case, please feel free to let us know and we will get back to you within 24 hours with a proper solution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>