Audio Authority 1527VB Audio and Video Customer Station Instruction Manual
- May 15, 2024
- Audio Authority
Table of Contents
Audio Authority 1527VB Audio and Video Customer Station
Specifications
- Model: 1527VB / AVB
- Power Supply: 12 volt DC, 5A
- Enclosure: Durable, powder-coated steel
- Audio-Video Capability: 2-way
- Integrated Lane Station (1527AVB): Call button, speaker,microphone
Product Usage Instructions
Mounting the Customer Station:
- Remove the cap and interior chassis assembly from the enclosure.
- Mount the 1594 mounting arm to the bottom of the Customer Station enclosure.
- Secure the arm at the desired angle using the supplied screws.
- Attach the mounting arm and Customer Station to the mounting surface using the supplied screws, nuts, and clamp plate.
Direct Mounting:
- Remove appropriate knockouts from the back of the Customer Station.
- Screw it to an electrical box or flat surface using the supplied screws.
- Insert wires through the self-sealing bushing if exposed to rain.
- Terminate hub cable with RJ45 connector and plug it into the Hub port.
Power Connection:
- Plug the 12-volt power supply into the Power jack on the internal chassis assembly.
- Fit the window onto the chassis assembly before sliding it back into the housing.
System Testing:
- Apply power to the customer station and system.
- Test audio, video, and call button performance.
- Adjust settings using the Model 1550A Setup Tool as needed.
FAQ:
Q: What should I do if I encounter issues with audio or video
performance?
A: Check the connections and settings using the setup tool.
Ensure all cables are properly connected and there are no obstructions
affecting performance.
Q: Can I use a different power supply with the Customer Station?
A: It is recommended to use the included 12-volt DC, 5A power supply to
ensure proper functionality and performance of the Customer Station.
Installation Instructions
1500 Series Customer Stations are available with 2-way audio and video
capability for use indoors or out. They are housed in durable, powder-coated,
steel enclosures and require 12 volt DC power from the included 5A power
supply. 1527AVB has an integrated lane station (1520) with call button,
speaker, and microphone. 1527VB does not.
For assembly details visit: https://www.audioauthority.com/page/cust-assy
Installing a Customer Station
The Model 1594 Mounting Arm is available to support the Customer Station from an adjacent surface, such as the side of a drive-up unit.
- Remove the cap (one screw on each side) and the interior chassis assembly (four screws on front) from the enclosure. Remove the window and set it in a place where it will not get scratched.
- Mount the 1594 mounting arm to the bottom of the Customer Station enclosure by removing four knockouts with a thin screwdriver and hammer and securing the arm at the desired angle using the supplied screws. Drill or punch three holes in the mounting surface and attach the mounting arm and Customer Station to it using the supplied screws, nuts, and clamp plate.
- The Customer Station can be mounted directly to a flat surface by removing the appropriate knockouts from the back and screwing it to an electrical box or other surface using the supplied screws. Put the included self-sealing bushing in the wire knockout if the back will be exposed to rain. Puncture the self-sealing bushing to insert the wires. Insert the hub cable through the bushing before terminating it with an RJ45 connector.
- Terminate the Category 5 or 6 hub cable with an RJ45 connector and plug it into the Hub port of the customer station chassis assembly.
- Plug the 12-volt power supply into the vacant Power jack on the internal chassis assembly.
- Fit the window onto the chassis assembly before sliding it back into the housing. Note: For best weather gasket performance, evenly tighten the 4 chassis screws until snug.
- Apply power to the customer station and 1500 Series system. Test audio, video and call button performance and adjust settings using the Model 1550A Setup Tool as needed. Reinstall the cap using two screws.
2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 •
859-233-4599 • Fax:
859-233-4510
[email protected]
www.audioauthority.com