Shenzhen Xinhuamei Electronics F9-6 True Wireless Earbuds User Manual
- June 5, 2024
- Shenzhen Xinhuamei Electronics
Table of Contents
- (ONE) Turn on / turn off the bluetooth earphone
- (TWO) Earphones TWS pairing (L & R)
- (THREE) Pairing TWS Earphone with Bluetooth devices (smart phone, etc)
- (FOUR) Button function
- (FIVE) Charging Instructions
- (SIX) Care and Maintenance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shenzhen Xinhuamei Electronics F9-6 True Wireless Earbuds User Manual
(ONE) Turn on / turn off the bluetooth earphone
TURN ON
Method 1: Take out the earbuds from charging case ,the earbuds will turn
on automatically. The led indicator will flash red and blue.
Method 2: Touch and hold the MF button for 2-3 seconds .
TURN OFF
Method 1: Touch and hold the MF button for 2-3 seconds to turn OFF the
Earphone, the led indicator will flash red rapidly then lights off.
Method 2: Put back the earbuds into charging case ,the earbuds will turn
off automatically and start being charging.
Tips: If the earphone without paired any mobile device, the both units will be
turn off after 5 munities; or if the bluetooth distance is beyond 10-12m and
without paired any device, the both units will be turn off after 5 munities
(TWO) Earphones TWS pairing (L & R)
Take out the both earbuds from charging case, it will auto turn on and auto paired with each other. Once paired , the led indicator will flash red & blue quickly. Tips: If pairing is unsuccessful, Touch and hold the MF button on both Earphone around 5 seconds simultaneously till the led indicator flash blue ONE time; Then turn on both unit again, they will auto pairing.
(THREE) Pairing TWS Earphone with Bluetooth devices (smart phone, etc)
Activate the Bluetooth function on your mobile device, select the “BT earbuds” from the list of available Bluetooth devices. Click it to pairing, once earphone paired with mobile device, you will hear a beep tone and the led indicator will off.
(FOUR) Button function
PLAYING MUSIC
Previous track: Short Press(Touch) the MF button of Left Earphone twice. Next
track: Short Press(Touch) the MF button of Right Earphone twice. Increase
Volume: Short Press(Touch) the MF button of Right Earphone 3 times.
Decrease Volume Short Press(Touch) the MF button of Left Earphone 3 times.
Pause/Play Music: Short Touch the MF button of either Earphone will
Pause/Resume the music.
ANSWER/END/REJECT A CALL
Answer Incoming: Call Short Press(Touch) the MF button of either
earphone.
Reject incoming Call: Press(Touch) the MF button of either earphone for 2
seconds and release.
End a Call: Short Press(Touch) the MF button of either earphone after phone
conversation.
VOICE ASSISTANT:
Activate the voice assistant: Short Press(Touch) around 1.5 seconds of either
earphone to activate the SIRI voice assistant function, only IOS system
supported.
Close the Voice assistant: After activated, short Press (Touch) around 1.5
seconds of either earphone to close the SIRI voice assistant function, only
IOS system supported.
(FIVE) Charging Instructions
Put the Bluetooth Earphone back into the charging slots correctly and securely to charging.
(SIX) Care and Maintenance
ATTENION
- Please kindly read this user manual before using the product carefully, and keep it for future reference.
- Please charging the product battery fully when first use.
- If do not use the product exceed 2 weeks, please charging it.
- Please only use the supplied cable to charging the product and certified adaptor.
- If the earphone can not be paired with mobile phone, please check first if the earphone was in bluetooth mode; if the earphone unable paired with mobile phone device, please turn off the earphone first ,then turn on and make sure it is in bluetooth pairing mode; If the mobile phone didn’t response, please reboot the mobile phone; If the earphone didn’t response, please reboot the earphone or recovery default setting.
CUTION
- Do not use the product at excessive volume levels or long time, as damage to hearing may occur.
- Do not charging the earphone with current exceed 2A, the battery might get damaged.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>