MuxLab HDMI/USB-C KVM Extender Kit HDBT, 4K/60 User Manual

: June 4, 2024
: MuxLab

Table of Contents

DIGITUS DS-55507 HDMI KVM IP Extender Set
Introduction
Features
Package Contents
Specification
Product Dimensions
Operation Controls and Functions
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DIGITUS DS-55507 HDMI KVM IP Extender Set

MuxLab-HDMI-USB-C-KVM-Extender-Kit-HDBT-
4K-60-product Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.

Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.

Introduction

The MuxLab HDMI/USB-C KVM Extender Kit HDBT, 4K/60 (500452) allows one HDMI channel and one USB2.0 channel to be transmitted over distances of up to 131ft (40m) at 4K@60Hz (4:4:4) resolution, or 230ft (70m) at resolutions up to 1080p via one (1) Cat 6/6a/7 unshielded twisted pair cable in a point-to-point configuration.

The MuxLab HDMI/USB-C KVM Extender Kit HDBT, 4K/60 includes one (1) transmitter and one (1) receiver. The transmitter is a wall plate HDBT 2×1 switcher with HDMI and USB-C input. It features a US one-gang enclosure for Decora-style wall plate openings. The USB-C input provides an ideal AV interface for connecting with new Apple notebooks and Windows® PCs as well as smartphones and tablets. The Transmitter is remotely powered by the Receiver via PoC. The Receiver features a 1×2 USB2.0 hub for transferring USB2.0 data transmissions and has analog audio output.

Features

Compliant with HDMI 2.0b, HDCP 2.2 and DisplayPort 1.2a
Supports 18Gbps video bandwidth
4K @ 60Hz (4:4:4) to distances of up to 131ft (40m) over single Cat6/6a/7 cable
1080p @ 60Hz to distances of up to 230ft (70m) over single Cat6/6a/7 cable
Supports all digital audio modes
Supports HDMI and USB-C input
USB2.0 extension with Receiver
Input signal selection supports automatic or manual mode
USB-C charging port

Notes ： Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.

Package Contents

One (1) HDMI/USB-C KVM Extender Kit HDBT, 4K/60 Transmitter
One (1) HDMI/USB-C KVM Extender Kit HDBT, 4K/60 Receiver
One (1) Power supply
Two (2) Wall Mount Brackets
One (1) User manual (available via download)

Specification

HDMI Compliance| HDMI 2.0b, DisplayPort 1.2a
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18 Gbps

Video Resolution

| 4096×2160@24/25/30/50/60Hz,

3840×2160@24/25/30/50/60Hz,

2048x1080p@23.98/24/25/29.97/30/50/59.94/60Hz,

1080i@50/59.94/60Hz,

720p@50/59.94/60Hz, 576p, 576i, 480p, 480i

Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0
Color Depth| 8/10/12-bit
HDR| HDR10, HDR10+

HDMI Audio Formats

| Dolby Atmos, TrueHD, Digital+, Digital; DTS X, HD

Master Audio, HD High Resolution Audio, 5.1; PCM 2-8Ch

Transmission Distance

| Max distance (1080p): 230ft / 70m over CAT6/6a/7

Max distance (4K): 131ft / 40m over CAT6/6a/7

ESD Protection

| Human body model — ±8kV (Air-gap discharge) & ±4kV

(Contact discharge)

Connectors (Transmitter)

| Inputs: 1x HDMI Type A [19-pin female] 1x USB-C

Outputs: 1x HDBaseT Out [RJ45, 8-pin female] 1x USB-C (only for charging)

Control: 1x USB-B [Micro USB, Update port]

Connectors (Receiver)

| Inputs: 1x HDMI IN [Type A, 19-pin female] 1x HDBaseT IN [RJ45, 8-pin female]

Outputs: 1x HDMI OUT [Type A, 19-pin female] 1x AUDIO OUT [Phoenix jack]

Control: 2x USB [USB A TYPE]

1x FW [Micro USB, Update port]

Power Supply

| Receiver: One (1) 110-240V/24VDC Power supply with interchangeable blades

Transmitter: Powered by the Receiver via PoC (Note: only one power supply is required if USB devices are being

powered)

---|---
Housing| Metal Enclosure

Dimensions (WxDxH)

| Wall plate: 1.31” x 2.58” x 2.70” (33.3mm x 65.7mm x 68.7mm)

Faceplate: 2.75” x 0.11” x 4.5” (69.9mm x 3mm x 114.3mm)

Receiver: 7.87” x 3.85” x 0.90” (200mm x 98mm x 23mm)

Weight

| Wall plate: 0.43 lbs (0.196 kg)

Receiver: 1.12 lbs (0.511 kg)

Shipping Weight| 2.67 lbs (1.21 kg)
Warranty| 2 years

Order Information

| 500452 HDMI/USB-C KVM Extender Kit HDBT,

4K/60 (UPC: 627699004524)

Product Dimensions

MuxLab-HDMI-USB-C-KVM-Extender-Kit-HDBT-
4K-60-fig-6
Typical Application

Applications include KMV commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems and collaborative PC systems,

Typical Application Diagram

The TX is PoC powered by the RX. However an optional power supply may be used if connected USB devices do not have their own power supply and must be powered via the TX USB port.

Operation Controls and Functions

Transmitter Panel

No.	Name	Function Description

1

| ****

Power LED

| The power LED indicator will illuminate in green when the product is

powered on, and red when the product is on standby.

2

| ****

HDMI LED

| When the HDMI input port is active and the HDMI signal is detected,

the HDMI LED will illuminate in green.

3

| ****

USB-C LED

| When the USB-C input port is active and USB-C signal is detected,

the USB-C LED will illuminate in green.

4| HDMI port| HDMI input port, connect to HDMI source device.
5| USB-C port| (1) USB-C signal input port.

(2) Charging port for devices with USB-C port.

6

| ****

CHARGE port

| Connect this port to power supply, then the USB-C port will power the

connected device.

Reciver Panel

No.	Name	Function Description
1	Power LED	When the product is powered on, the Power LED indicator will

turn on.
2| DC 24V| DC 24V power supply connector.
3| FW| Firmware update port.

4

| ****

HDBaseT IN

| Connect to the HDBaseT OUT port of Transmitter with a CAT6/6a/7

cable.

Note:
The transmitter supports automatic/manual mode for source signal input. In manual switching mode, press the SOURCE button to select HDMI/ USB-C input source.
In automatic switching mode, the last connected or the currently connected source signal will be selected automatically; When both HDMI and USB-C ports are connected to the active signal, HDMI signal input is preferred; When both HDMI and USB-C ports are not connected to the active signal, it will switch to the source signal of the Receiver.

Troubleshooting

The following table describes some of the symptoms and possible solutions regarding the HDMI/USB-C KVM Extender Kit HDBT, 4K/60.

symptom	Probable cause	Possible Solution

No Image

|

· No power or wrong power supply

· UTP Cable

· HDMI or USB-C cable

· Synchronization

|

Check power connections

Check the UTP Cable

Chexk the HDMI and USB-C cables

Check UTP Cable length.

Flickering Image

|

· Synchronization

|

Check UTP Cable Length

Check the HDMI and USB-C Cables

Choppy sound

|

· Synchronization

|

Check UTP Cable Length

USB not working but video OK|

· USB Cable

|

Check USB Cable

If you still cannot diagnose the problem, please call MuxLab Customer Technical Support at 877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).

MuxLab Inc.
2321 Rue Cohen
Montreal, Quebec
Canada H4R 2N7
Tel.: +1 514-905-0588 Fax: +1 514-905-0589 Toll Free (North America): 877 689-5228 URL: www.muxlab.com
E-mail: info@muxlab.com