HOBBYWING XERUN 2848 Sensored Brushless Motor Instruction Manual

HOBBYWING XERUN 2848 Sensored Brushless Motor

Product Information

Specifications

• Model: XERUN 2848
• KV: 9&36/4%,7
• LiPos: 4
• No-load Current (A): 4
• Diameter/Length (mm): 28.50
• Shaft Diameter/Length (mm): 3.175/2.85
• Bearing size (mm): 2×8
• Poles: 16
• Weight (g): 19
• Applications: SPOU, NN JO, etc.

Product Usage Instructions

1. Installation of the Motor
   Before installing the motor on the vehicle, ensure the screws’ length is appropriate to avoid damage due to excessive length.

2. Connecting the Motor to an ESC
   Pay attention to the marked three-phase positions A, B, and C when connecting the motor and ESC. Ensure wires A, B, and C of the ESC match the respective wires of the motor to prevent damage.

3. Inspection
   Prior to powering on the ESC, check the motor installation and all connections’ order for correctness.

4. Gearing
   Select a suitable gear ratio based on the motor’s operating temperature to prevent damage.

5. Assembly and Disassembly
   Regularly inspect bearings and clean motor dirt for increased longevity and efficiency. Follow the assembly and disassembly steps carefully.

Frequently Asked Questions (FAQ)

• Q: Can I modify the product?
  A: Unauthorized modifications may result in damage for which we cannot assume responsibility.

• Q: What should I do before powering on the ESC?
  A: Check motor installation and connection order to ensure correct setup.

Thank you for purchasing this HOBBYWING product! Please read this declaration carefully before use, once you use the product, we will assume that you have read and agreed with all the content. Brushless power systems can be very dangerous and any improper use may cause personal injury and damage to the product and related devices, so please strictly follow the instructions during installation and use. Because we have no control over the use, installation, or maintenance of this product, no liability may be assumed for any damages or losses resulting from the use of the product. We do not assume responsibility for any losses caused by unauthorized modifications to our product. We have the right to modify our product design, appearance, features and usage requirements without notification. We, HOBBYWING, are only responsible for our product cost and nothing else as a result of using our product. Regarding the possible semantic difference between the two different versions of the declaration, for users in mainland China, please take standard.

Safety Warnings

• Please carefully check the power devices and manual of the car frame to ensure the power pairing is reasonable. Avoid incorrect pairing to overload and damage the motor.
• Always wire up all the parts of the equipment carefully. If any of the connections come loose as a result of vibration, your model RC may lose control.
• Never apply full throttle if the pinion is not installed. Due to the extremely high RPMs without load, the motor may get damaged.
• Never allow the motor case to get 100 degrees Celsius (212 degrees Fahrenheit) otherwise it may cause the rotor to demagnetize.

Features

• High efficiency, low-temperature rise, and the motor always in a safe state.
• The mechanical timing of the motor can be adjusted from 20-40°, it is convenient for the driver to calibrate accurately the output power of the motor and meet the power requirements of various applications.
• The motor has a low cogging effect and a small torque pulse, it is very smooth at low speeds and has superb handling performance.
• The protection grade of the motor is IP5X. Its excellent dustproof performance can easily deal with various dusty track environments.

Specifications

XERUN 2848

Installation & Connection

1. Installation of the motor
   There are 6 motor mounting holes in the M3 specification, and the mounting holes are 5mm in depth, before installing the motor on the vehicle, please carefully confirm whether the length of the screws is appropriate, so as not to damage the motor due to excessive length.

2. How to Connect the Motor to an ESC
   When connecting the motor and ESC, please pay attention to the marked three- phase position of A, B and C to ensure that the three wires of the motor and ESC are connected in the order that, wire A of the esc matches wire A of the motor, wire B of the esc matches wire B of the motor, wire C of the esc matches wire C of the motor. Otherwise, it cannot run and may even damage the AC and motor. Then connect the sensor cable to the motor and ESC.

3. Inspection
   Before powering on the ESC, please check the motor installation and the order of all connections.

Gearing

Reasonable selection of gear ratio is very important. Improper gear ratio may cause damage. You can select the gear ratio according to the following points!

1. The operating temperature of the motor
   The motor temperature should be lower than 100 degrees Celsius (212 degrees Fahrenheit) in operation. High temperature may cause the magnets to get demagnetized, the coil to melt and short circuit and the ESC to get damaged. A proper gearing ratio can effectively prevent the motor from overheating.

2. The principle of selecting the gear ratio
   To avoid possible damage to the ESC and motor caused by the overheating, please start with a small pinion/a big FDR and check the motor temperature regularly. If the motor and ESC temperature stays at a low level during the operation, you can change a larger pinion/a lower FDR and also check the motor temperature regularly to ensure that the new FDR is suitable for your vehicle, local weather and track condition. (Note: For the safety of electric devices, please check the ESC and motor temperature regularly.)

Assembly And Disassembly

For the motor to have a longer service life and higher efficiency, we suggest regularly checking the bearing and cleaning the dirt in the motor. The specific time depends on the frequency of using the motor and the site conditions. When installing, please follow the steps in the following assembly drawing; when disassembling, follow the reverse steps.

Parts List

SHENZHEN HOBBYWING TECHNOLOGY Co., LTD.
101-402 Building 4, Yasen Chuangxin Hi-tech Industrial Park, 8 Chengxin Road, Baolong Industrial Town, Longgang District, Shenzhen, China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>