luciamo LED-GPL44-40 Remote Control Lights Instruction Manual
- May 15, 2024
- Luciamo
Table of Contents
luciamo LED-GPL44-40 Remote Control Lights
Product Specifications
- Model: Remote Control LED Lights
- Power: 12W
- Color Temperature: Adjustable (Warm to Cool)
- Remote Control: Included
Product Usage Instructions
Turning On/Off and Adjusting Brightness
To turn the lights on or off, use the power button on the remote control.
Adjust the brightness by pressing the “Brightness (-)” or “Brightness (+)”
buttons.
Adjusting Light Temperature
The light temperature can be changed from warm to cool by pressing the
corresponding button on the remote control.
Night Light Delayed Shutdown
To enable the Night Light Delayed Shutdown feature, press the corresponding
button on the remote control. This feature allows the lights to gradually dim
and turn off after a set period.
Pairing/Unpairing Remote Control and Light
The lights are already paired with the remote control. If you need to pair
or unpair them, follow the instructions provided in the manual that came with
your product.
Switching Light Temperature via Switch
To switch the light temperature without using the remote control, use the
switch located on the light fixture itself. Toggle the switch to adjust
between warm and cool light temperatures.
Frequently Asked Questions
-
Q: How do I change the batteries in the remote control?
A: To change the batteries in the remote control, locate the battery compartment on the back of the remote, remove the old batteries, and insert new ones according to the polarity markings. -
Q: Can I install these lights outdoors?
A: These lights are designed for indoor use only. Installing them outdoors may damage the product and void the warranty.
CONNECTION
LIGHTS ARE ALREADY PAIRED WITH THE REMOTE CONTROL
Night light/delayed shutdown
- Short press – switched to 10% power and switched to a warm colour
- Long press – 1 x flicker – set automatic shutdown after 30 minutes
Pairing/unpairing the remote control and light
- after turning on the light with a wall switch, press the ON/OFF button for 3 seconds. After pairing, the light will slowly flash 3 times, after unpairing, the light will quickly flash 6 times. The interval for each of these operations is a maximum of 30 seconds after turning on.
- when pairing the remote control with a larger number of lights, make sure that the entire system is unpaired (no lights from the system respond to the remote control).
- the lights can be always controlled with only one remote control, but the number of controlled lights is not limited.
- the maximum range of the remote control is 20 m and the remote control uses 2x AAA batteries.
switching the light temperature can be done via a switch