TesFram B0BFGHH4B4 Front License Plate Holder Mount User Guide
- May 15, 2024
- TesFram
Table of Contents
LICENSE PLATE MOUNT
USAGE GUIDELINES
B0BFGHH4B4 Front License Plate Holder Mount
Thank you for using TesFram products, please read the instructions.
Product Details:
Material – Made of high-density aircraft-grade aluminum, 100% RUST PROOF,
suitable for all extreme weather conditions.
Easy installation – No drilling & No adhesives & No scratches.
Protect your car grill – One-piece design without contacting the plastic
gril/bumper.
Driving safety – After 5000 safety tests, it does not interfere with the
Autopilot/Parking sensors.
Anti-theft – Secured with TesFram security screws.
Height Adjustable – Choose the height you prefer.
NOTE:
Align the bracket with the center of the grill before pushing the joystick
down, please calibrate before installing (center only).
Any questions, feel free to send mail for quick response.
Email: TesFram@gmail.com
Step 1
Customize how high you put your license plate and tighten the small screws
down all the way.
Step 2
Install your license plate. Just place the silver screws and use the provided
wrench to tighten the nuts. –
Note: Installing nuts (stainless steel 304) can prevent silver screws
from loosening due to prolonged falling off.
Step 3
Align the bracket with the middle of the grill as indicated by the arrow from
A to B.
Make sure the mount is pushed firmly to the louvers and follow the arrow in C
to press firmly with both hands to lock the joystick into place.
Step 4
Install the security screw. TesFram uses an interference fit to keep the
interior tightly closed.
Please use the provided wrench to tighten the security screw.
If you want to remove the license plate holder, please loosen the security
screw first, then lift the joystick.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>