Tianshi DZK02 Wireless Mouse Instruction Manual
- July 15, 2024
- Tianshi
Table of Contents
PRODUCT MANUAL
Basic parameters:
Product name: Wireless Mouse
Model: DZK02,DZK01,DZK03,DZK04,DZK05,DZK06,DZK07,DZK08.DZK09, DZK10
Wireless Receiving Distance: 10 meters
Product Weight: 60g
Receiver weight: 1.6g
Interface: 250Hz
Operating Voltage: 3.0V
Operating Current: <20mA
System Requirements:
System Compatibility: Windows7/8/8.1/10/Mac/Android Hardware
Compatibility: The PC has an available USB port
Instructions for use:
2.4G mode:
- Take out the USB receiver from the battery compartment and plug it into the computer.
- Turn the bottom switch to the right.
- The mouse and the USB receiver can be used normally after matching the code for 5 seconds.
Bluetooth Mode:
-
Take out the USB receiver from the battery compartment and do not insert it into any computer.Turn the bottom switch to the left to turn it off, and then turn the switch to the right to turn it on.
-
Turn on the mobile phone or computer device, click Settings,click Bluetooth,Search for the Bluetooth device BT 5.0 Mouse and click the link.
-
Wait for 5 seconds, the connection is successful, you can use it normally.
-
In some cases, it may be necessary to turn on Bluetooth and then press the DPl button.
Find the Bluetooth name bt 5.0 mouse on the device for linking -
When the mouse is stuck and the pointer doesn’t follow the instructions, it may be power lf the amount is insufficient, Please replace the battery in time.
-
The Bluetooth mouse is not compatible with the system XP Version 4.2or below, and the device is a 2.0 device,10S 13.0 and win7 are not compatible.The apple system needs to be hit Turn on auxiliary function – auxiliary touch can have mouse pointer display.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>